TFM04 TIPS SET ANSWERS AND QUESTIONS SET A+
✔✔Combustion chamber shall be scraped clean to its original surface - ✔✔Once a
week and shallbe inspected for desecration or defects
✔✔Ash removal container cart shall not exceed - ✔✔20gallons
✔✔Fuel storage shall not exceed a - ✔✔1 day supply
✔✔2-a rated or a 1.6gal wet chemical fire extinguisher shall have a minimum of - ✔✔20
ft spray used for solid fuel pile and fule pile not exceed 5 ft
✔✔what does (example)4B195 mean - ✔✔it means 195 is the normal pressure and can
be hydrostatic tested 3 times that
✔✔what NFPA is electricaty talked about in - ✔✔NFPA 70
✔✔blow off caps - ✔✔shall alwas be installed upon installation
✔✔how many extinguishers can replace for a 40A - ✔✔none they have to be of similar
rating
✔✔after a discharge you have to set up system back - ✔✔manualy
✔✔ Operating devices shall operate at - ✔✔32F to 120F
✔✔Manual actuators shall not have a force more than - ✔✔40lbs
✔✔Manual actuators shall not have a movement of more than - ✔✔14 inches
✔✔Instructions with pictographs and lettering shall be atleast - ✔✔1/4 inches
✔✔Pipe and fittings shall be made of - ✔✔Non combustible materials
✔✔Combustion chamber shall be scraped clean to its original surface - ✔✔Once a
week and shallbe inspected for desecration or defects
✔✔Ash removal container cart shall not exceed - ✔✔20gallons
✔✔Fuel storage shall not exceed a - ✔✔1 day supply
✔✔2-a rated or a 1.6gal wet chemical fire extinguisher shall have a minimum of - ✔✔20
ft spray used for solid fuel pile and fule pile not exceed 5 ft
✔✔what does (example)4B195 mean - ✔✔it means 195 is the normal pressure and can
be hydrostatic tested 3 times that
✔✔what NFPA is electricaty talked about in - ✔✔NFPA 70
✔✔blow off caps - ✔✔shall alwas be installed upon installation
✔✔how many extinguishers can replace for a 40A - ✔✔none they have to be of similar
rating
✔✔after a discharge you have to set up system back - ✔✔manualy
✔✔ Operating devices shall operate at - ✔✔32F to 120F
✔✔Manual actuators shall not have a force more than - ✔✔40lbs
✔✔Manual actuators shall not have a movement of more than - ✔✔14 inches
✔✔Instructions with pictographs and lettering shall be atleast - ✔✔1/4 inches
✔✔Pipe and fittings shall be made of - ✔✔Non combustible materials