HUD MANUFACTURED HOME INSTALLATION PROGRAM
(MHIP) INSTALLER EXAMINATION COMPLETE
QUESTIONS AND DETAILED SOLUTIONS LATEST UPDATE
THIS YEAR JUST RELEASED
Exam Coverage Areas
1. MHIP regulatory framework — Purpose, scope, federal standards, and relationship between Parts 3280, 3282, 3285,
and 3286.
2. Installer licensing requirements — Experience, training, examination, insurance, bonding, licensing, and license
responsibilities.
3. Manufacturer installation instructions — Approved installation designs, DAPIA approval, alternative designs, and
required compliance.
4. Preinstallation and site preparation — Site evaluation, soil, drainage, grading, frost conditions, and preparation
requirements.
5. Foundations and support systems — Footings, piers, supports, leveling, stability, and foundation requirements.
6. Wind and seismic anchorage — Tie-down systems, anchors, connections, resistance requirements, and site
conditions.
7. Utilities and optional features — Plumbing, fuel supply, electrical systems, ductwork, cooling systems, and related
installation work.
8. Inspection and certification — Qualified inspectors, inspection procedures, correction of defects, installer
certification, and verification.
9. Documentation and reporting — Installation records, retailer responsibilities, certification reports, tracking
information, and problem reporting.
10. Installer responsibilities and compliance — Corrective work, operational checks, penalties, dispute resolution, and
professional responsibilities.
1. Which federal regulation primarily establishes the Model
Manufactured Home Installation Standards that installers must
follow?
A. 24 CFR Part 3280
B. 24 CFR Part 3282
C. 24 CFR Part 3285
D. 24 CFR Part 3288
Answer: C. 24 CFR Part 3285
,Rationale: Part 3285 establishes the Model Manufactured Home
Installation Standards, while Part 3286 establishes the Manufactured
Home Installation Program and related administrative requirements.
2. What is the primary purpose of the HUD Manufactured Home
Installation Program for manufactured home installations?
A. To regulate manufactured home retail pricing
B. To establish minimum installation standards and installation program
requirements
C. To regulate factory construction procedures exclusively
D. To establish homeowner insurance requirements
Answer: B. To establish minimum installation standards and
installation program requirements
Rationale: HUD established the installation program to ensure
minimum installation standards and appropriate installation programs
are applied to manufactured homes. (HUD)
3. In a HUD-administered installation state, who generally must hold
the required installation license for directing installation work?
A. Every laborer working on the home
B. The homeowner only
C. The person or entity responsible for directing, supervising, or
controlling installation
D. The local utility provider
,Answer: C. The person or entity responsible for directing, supervising,
or controlling installation
Rationale: Federal requirements place licensing responsibility on the
installer or business responsible for directing, supervising, or controlling
covered installation activities. (Legal Information Institute)
4. Which statement best describes the relationship between
manufacturer installation instructions and federal installation
standards?
A. Manufacturer instructions may always be ignored when installers
prefer another method.
B. Installers must follow applicable approved manufacturer installation
instructions.
C. Manufacturer instructions apply only to electrical systems.
D. Manufacturer instructions are optional recommendations without
regulatory significance.
Answer: B. Installers must follow applicable approved manufacturer
installation instructions.
Rationale: Installers are responsible for understanding and following
approved manufacturer installation instructions and qualifying
alternative designs. (Legal Information Institute)
5. When an alternative installation design differs from manufacturer-
provided instructions, what professional normally must prepare or
certify that alternative design?
, A. Retail salesperson
B. Qualified professional engineer or registered architect
C. Homeowner
D. Equipment supplier
Answer: B. Qualified professional engineer or registered architect
Rationale: An alternative design may be prepared and certified by a
professional engineer or registered architect, subject to manufacturer
and DAPIA approval requirements. (Legal Information Institute)
6. What additional approval is generally required when an alternative
installation design is prepared by a professional engineer?
A. Approval only from the homeowner
B. Approval from the manufacturer and DAPIA
C. Approval only from the local utility
D. Approval only from the installer
Answer: B. Approval from the manufacturer and DAPIA
Rationale: HUD explains that alternative PE or RA designs must be
approved by the manufacturer and DAPIA where the applicable federal
requirements apply. (HUD)
7. Which federal regulation establishes the Manufactured Home
Installation Program administrative requirements governing HUD-
administered installation programs?
A. 24 CFR Part 3280
B. 24 CFR Part 3282
(MHIP) INSTALLER EXAMINATION COMPLETE
QUESTIONS AND DETAILED SOLUTIONS LATEST UPDATE
THIS YEAR JUST RELEASED
Exam Coverage Areas
1. MHIP regulatory framework — Purpose, scope, federal standards, and relationship between Parts 3280, 3282, 3285,
and 3286.
2. Installer licensing requirements — Experience, training, examination, insurance, bonding, licensing, and license
responsibilities.
3. Manufacturer installation instructions — Approved installation designs, DAPIA approval, alternative designs, and
required compliance.
4. Preinstallation and site preparation — Site evaluation, soil, drainage, grading, frost conditions, and preparation
requirements.
5. Foundations and support systems — Footings, piers, supports, leveling, stability, and foundation requirements.
6. Wind and seismic anchorage — Tie-down systems, anchors, connections, resistance requirements, and site
conditions.
7. Utilities and optional features — Plumbing, fuel supply, electrical systems, ductwork, cooling systems, and related
installation work.
8. Inspection and certification — Qualified inspectors, inspection procedures, correction of defects, installer
certification, and verification.
9. Documentation and reporting — Installation records, retailer responsibilities, certification reports, tracking
information, and problem reporting.
10. Installer responsibilities and compliance — Corrective work, operational checks, penalties, dispute resolution, and
professional responsibilities.
1. Which federal regulation primarily establishes the Model
Manufactured Home Installation Standards that installers must
follow?
A. 24 CFR Part 3280
B. 24 CFR Part 3282
C. 24 CFR Part 3285
D. 24 CFR Part 3288
Answer: C. 24 CFR Part 3285
,Rationale: Part 3285 establishes the Model Manufactured Home
Installation Standards, while Part 3286 establishes the Manufactured
Home Installation Program and related administrative requirements.
2. What is the primary purpose of the HUD Manufactured Home
Installation Program for manufactured home installations?
A. To regulate manufactured home retail pricing
B. To establish minimum installation standards and installation program
requirements
C. To regulate factory construction procedures exclusively
D. To establish homeowner insurance requirements
Answer: B. To establish minimum installation standards and
installation program requirements
Rationale: HUD established the installation program to ensure
minimum installation standards and appropriate installation programs
are applied to manufactured homes. (HUD)
3. In a HUD-administered installation state, who generally must hold
the required installation license for directing installation work?
A. Every laborer working on the home
B. The homeowner only
C. The person or entity responsible for directing, supervising, or
controlling installation
D. The local utility provider
,Answer: C. The person or entity responsible for directing, supervising,
or controlling installation
Rationale: Federal requirements place licensing responsibility on the
installer or business responsible for directing, supervising, or controlling
covered installation activities. (Legal Information Institute)
4. Which statement best describes the relationship between
manufacturer installation instructions and federal installation
standards?
A. Manufacturer instructions may always be ignored when installers
prefer another method.
B. Installers must follow applicable approved manufacturer installation
instructions.
C. Manufacturer instructions apply only to electrical systems.
D. Manufacturer instructions are optional recommendations without
regulatory significance.
Answer: B. Installers must follow applicable approved manufacturer
installation instructions.
Rationale: Installers are responsible for understanding and following
approved manufacturer installation instructions and qualifying
alternative designs. (Legal Information Institute)
5. When an alternative installation design differs from manufacturer-
provided instructions, what professional normally must prepare or
certify that alternative design?
, A. Retail salesperson
B. Qualified professional engineer or registered architect
C. Homeowner
D. Equipment supplier
Answer: B. Qualified professional engineer or registered architect
Rationale: An alternative design may be prepared and certified by a
professional engineer or registered architect, subject to manufacturer
and DAPIA approval requirements. (Legal Information Institute)
6. What additional approval is generally required when an alternative
installation design is prepared by a professional engineer?
A. Approval only from the homeowner
B. Approval from the manufacturer and DAPIA
C. Approval only from the local utility
D. Approval only from the installer
Answer: B. Approval from the manufacturer and DAPIA
Rationale: HUD explains that alternative PE or RA designs must be
approved by the manufacturer and DAPIA where the applicable federal
requirements apply. (HUD)
7. Which federal regulation establishes the Manufactured Home
Installation Program administrative requirements governing HUD-
administered installation programs?
A. 24 CFR Part 3280
B. 24 CFR Part 3282
