MEDSTUDY.COM
RESIDENTIAL ELECTRICAL TEST | QUESTIONS AND
ANSWERS | 100% CORRECT ANSWERS GRADED A+ |
LATEST EXAM UPDATE
An architect or electrical engineer prepares a set of drawings that shows the
necessary instructions and details needed by the skilled workers who are to
build the structure.
The construction features of the structural members are shown along with the
material required which includes sizes, quantities, and . - CORRECT
ANSWER - locations
Architect, engineers and designers will sometimes use different , so it is
important to verify what is being indicated on the plans and in the
specifications.
.
symbols
Answers:
a.
equipment
b.
materials
c.
symbols
d.
all of the above - CORRECT ANSWER - Selected Answer:
.
symbols
,MEDSTUDY.COM
An electrician must be able to the 2-dimensional plans into an actual
electrical installation and the many different views of the plans and
coordinate them into a 3-dimensional picture.
a.
all of the above
b.
convert, visualize
c.
install, maintain
d.
supervise, sell - CORRECT ANSWER - b.
convert, visualize
Be very careful when interpreting symbols because of the between
them.
Answers:
a.
proximity
b.
all of the above
c.
similarity
d.
clarity - CORRECT ANSWER - Selected Answer:
c.
similarity
Boxes can be installed in existing construction through a fairly small opening
and are readily available for .
,MEDSTUDY.COM
Answers:a.
luminaires
b.
receptacles
c.
paddle-fan support
d.
all of the above - CORRECT ANSWER - Selected Answer:c.
paddle-fan support
Boxes used at lighting outlets must be designed or installed so that a luminaire
may be attached to it. This is typically accomplished by the manufacturer
providing in the boxes .
Answers:
a.
screw threads
b.
plaster rings
c.
tapped holes
d.
all of the above - CORRECT ANSWER - Selected Answer:
c.
tapped holes
Ceiling outlet boxes used exclusively for lighting are required to be suitable to
support a luminaire weighing a minimum of .
Answers:
, MEDSTUDY.COM
a.
50 lb
b.
all of the above
c.
35 lb
d.
25 lb - CORRECT ANSWER - Selected Answer:
a.
50 lb
Curved lines are used to differentiate the electrical circuitry from the drawing
lines used in .
Answers:
a.
communication
b.
building construction
c.
all of the above
d.
plumbing - CORRECT ANSWER - Selected Answer:
b.
building construction
Device boxes and faceplates are typically designed for 6-32 screws. These
correspond to .
Answers:
RESIDENTIAL ELECTRICAL TEST | QUESTIONS AND
ANSWERS | 100% CORRECT ANSWERS GRADED A+ |
LATEST EXAM UPDATE
An architect or electrical engineer prepares a set of drawings that shows the
necessary instructions and details needed by the skilled workers who are to
build the structure.
The construction features of the structural members are shown along with the
material required which includes sizes, quantities, and . - CORRECT
ANSWER - locations
Architect, engineers and designers will sometimes use different , so it is
important to verify what is being indicated on the plans and in the
specifications.
.
symbols
Answers:
a.
equipment
b.
materials
c.
symbols
d.
all of the above - CORRECT ANSWER - Selected Answer:
.
symbols
,MEDSTUDY.COM
An electrician must be able to the 2-dimensional plans into an actual
electrical installation and the many different views of the plans and
coordinate them into a 3-dimensional picture.
a.
all of the above
b.
convert, visualize
c.
install, maintain
d.
supervise, sell - CORRECT ANSWER - b.
convert, visualize
Be very careful when interpreting symbols because of the between
them.
Answers:
a.
proximity
b.
all of the above
c.
similarity
d.
clarity - CORRECT ANSWER - Selected Answer:
c.
similarity
Boxes can be installed in existing construction through a fairly small opening
and are readily available for .
,MEDSTUDY.COM
Answers:a.
luminaires
b.
receptacles
c.
paddle-fan support
d.
all of the above - CORRECT ANSWER - Selected Answer:c.
paddle-fan support
Boxes used at lighting outlets must be designed or installed so that a luminaire
may be attached to it. This is typically accomplished by the manufacturer
providing in the boxes .
Answers:
a.
screw threads
b.
plaster rings
c.
tapped holes
d.
all of the above - CORRECT ANSWER - Selected Answer:
c.
tapped holes
Ceiling outlet boxes used exclusively for lighting are required to be suitable to
support a luminaire weighing a minimum of .
Answers:
, MEDSTUDY.COM
a.
50 lb
b.
all of the above
c.
35 lb
d.
25 lb - CORRECT ANSWER - Selected Answer:
a.
50 lb
Curved lines are used to differentiate the electrical circuitry from the drawing
lines used in .
Answers:
a.
communication
b.
building construction
c.
all of the above
d.
plumbing - CORRECT ANSWER - Selected Answer:
b.
building construction
Device boxes and faceplates are typically designed for 6-32 screws. These
correspond to .
Answers:
