FIRE AND SMOKE RESTORATION ACTUAL FINAL
QUESTIONS AND ANSWERS SET A+
✔✔When mixing chemicals, technicians should fill the mixing container first
__________ _________, then add the __________ ___________________. - ✔✔with
water, chemical concentrate
✔✔___________ ____________ cream is effective for cleaning finished wood furniture
with heavy smoke damage. - ✔✔wood restoring
✔✔Usually, the most economical restoration option is _______________. - ✔✔cleaning
✔✔The cleaning technician's primary task when cleaning structural items is to restore
and preserve either _________ or material __________. - ✔✔fabrics, surfaces
✔✔A basic step required in light-to-moderate smoke odor situations is to begin by
cleaning the __________ area. - ✔✔source
✔✔The restorer's ability to restore soot-contaminated surfaces in influenced by the
location of the __________ line. - ✔✔heat
✔✔The coating components of acoustical textured (popcorn type) ceiling will
_____________ when cleaned with aggressive cleaning techniques. - ✔✔deteriorate
✔✔To prevent damage to breakable items on walls or furniture , the technician should
__________ breakables before wet cleaning. - ✔✔secure
✔✔Most cleaning procedures for structures will begin at the ____________ and finish at
the_____________. - ✔✔ceilings, floor
, ✔✔When processing smoke residue from painted walls, all cleaning will begin at the
_________ and finish at the__________. - ✔✔bottom, top
✔✔Moderate soot on semi-gloss enamel painted surfaces is safely removed with a
___________ or general purpose cleaner. - ✔✔degreaser
✔✔Washable hard surfaces such as glossy paints, plastic surfaces, and porcelain are
commonly cleaned with _________ _________ cleaners. - ✔✔general purpose
✔✔Normally, when cleaning light to moderate soot-contaminated flat latex-painted
surfaces, restorers should __________________ or dry-sponge, followed by wet
cleaning when necessary - ✔✔pre-conditioned
✔✔When stained or odors persist after painted surfaces are cleaned, the surface
should be__________ before repainting. - ✔✔sealed
✔✔A major complication associated with smoke damage attics is accessibility to
surfaces and contents of _____________ value. - ✔✔questionable
✔✔When a wood structural member is charred, depending upon severity , it should be
scraped before sealing, removed and replaced or cleaning using ___________ media. -
✔✔blast
✔✔Technicians should not decide they will able to restore a damaged item until they
have pretested the item and communicated with the _________. - ✔✔customer
✔✔When cleaning finished wood surfaces, it is recommended to wash the wood panel
surfaces in the same direction of the _______ grain. - ✔✔wood
✔✔When cleaning finished paneling with light to moderate smoke reduces, wet clean
with a ________ _________ _________ - ✔✔mild alkaline detergent
✔✔___________ __________ gel or cream is a restoration agent used to remove
smoke embedded within a clear coated finished surface, especially on wooden furniture.
- ✔✔wood restoring
✔✔Before evaluating the success of wet cleaning procedures on masonry surfaces, the
surfaces should be ________. - ✔✔Dry
✔✔Effective cleaning methods for smoke contaminated exterior masonry surfaced are
achieved by using_________ solutions and _______ bastings. - ✔✔alkaline, media
QUESTIONS AND ANSWERS SET A+
✔✔When mixing chemicals, technicians should fill the mixing container first
__________ _________, then add the __________ ___________________. - ✔✔with
water, chemical concentrate
✔✔___________ ____________ cream is effective for cleaning finished wood furniture
with heavy smoke damage. - ✔✔wood restoring
✔✔Usually, the most economical restoration option is _______________. - ✔✔cleaning
✔✔The cleaning technician's primary task when cleaning structural items is to restore
and preserve either _________ or material __________. - ✔✔fabrics, surfaces
✔✔A basic step required in light-to-moderate smoke odor situations is to begin by
cleaning the __________ area. - ✔✔source
✔✔The restorer's ability to restore soot-contaminated surfaces in influenced by the
location of the __________ line. - ✔✔heat
✔✔The coating components of acoustical textured (popcorn type) ceiling will
_____________ when cleaned with aggressive cleaning techniques. - ✔✔deteriorate
✔✔To prevent damage to breakable items on walls or furniture , the technician should
__________ breakables before wet cleaning. - ✔✔secure
✔✔Most cleaning procedures for structures will begin at the ____________ and finish at
the_____________. - ✔✔ceilings, floor
, ✔✔When processing smoke residue from painted walls, all cleaning will begin at the
_________ and finish at the__________. - ✔✔bottom, top
✔✔Moderate soot on semi-gloss enamel painted surfaces is safely removed with a
___________ or general purpose cleaner. - ✔✔degreaser
✔✔Washable hard surfaces such as glossy paints, plastic surfaces, and porcelain are
commonly cleaned with _________ _________ cleaners. - ✔✔general purpose
✔✔Normally, when cleaning light to moderate soot-contaminated flat latex-painted
surfaces, restorers should __________________ or dry-sponge, followed by wet
cleaning when necessary - ✔✔pre-conditioned
✔✔When stained or odors persist after painted surfaces are cleaned, the surface
should be__________ before repainting. - ✔✔sealed
✔✔A major complication associated with smoke damage attics is accessibility to
surfaces and contents of _____________ value. - ✔✔questionable
✔✔When a wood structural member is charred, depending upon severity , it should be
scraped before sealing, removed and replaced or cleaning using ___________ media. -
✔✔blast
✔✔Technicians should not decide they will able to restore a damaged item until they
have pretested the item and communicated with the _________. - ✔✔customer
✔✔When cleaning finished wood surfaces, it is recommended to wash the wood panel
surfaces in the same direction of the _______ grain. - ✔✔wood
✔✔When cleaning finished paneling with light to moderate smoke reduces, wet clean
with a ________ _________ _________ - ✔✔mild alkaline detergent
✔✔___________ __________ gel or cream is a restoration agent used to remove
smoke embedded within a clear coated finished surface, especially on wooden furniture.
- ✔✔wood restoring
✔✔Before evaluating the success of wet cleaning procedures on masonry surfaces, the
surfaces should be ________. - ✔✔Dry
✔✔Effective cleaning methods for smoke contaminated exterior masonry surfaced are
achieved by using_________ solutions and _______ bastings. - ✔✔alkaline, media
