ASME Code || 100% Valid Solutions.
Name the 13 headings on the "operator's state log book." correct answers Date, time, continuous
blowdown setting, surface blowdown valves opened, gauge glass blowdown, low water cutoff
tested, safety valve manually tested, auxiliary equipment checked, boiler ignition verified (on
start up), boiler room cleaned, what was the internal conditions observed when the boiler was
opened, operator notes, signature and license number of operator.
What is NBIC? correct answers National board inspection code. The NBIC provides standards
for the installation, inspection, and repair and/or alteration of boilers, pressure vessels, and
pressure relief devices.
What is BPVC? correct answers ASME's Boiler and Pressure Vessel Code.
What is section 7 "Care of Power Boilers." correct answers Provides guidelines to assist those
directly responsible for operating, maintaining, and examining power boilers. Guidelines are also
provided for operation of auxiliary equipment and appliances that affect the safe and reliable
operation of power boilers.
What is CMR? correct answers Code of Massachusetts Regulations. Is the collection of
regulations promoted by various agencies of the commonwealth of Massachusetts. It is the state
counterpart to the national Code of Federal Regulation (CFR).
What is 310 CMR section 7? correct answers Air pollution control.
What are the essential sections of 310 CMR? correct answers 7.01: general regulations to prevent
air pollution.
7.02: emissions limitations list.
522 CMR: Board of Boiler Rules
,What is Section 2.02 and what are the essentials? correct answers 522 CMR 2.00: Power Boilers
2.02: records.
To ensure the proper daily inspection of steam boilers, you should do this:
Part 1: When an engineer or fireman is operating steam boilers or steam engines, he or she is
actually engaged as an assistant to the person in charge, and during his or her hours on duty, he
or she is held responsible for the proper operation of the boilers and engines specified and their
appurtenances. Operators of steam boilers shall complete and sign the Operator's Record Book,
as provided for in M.G.L. c. 146, @ 46A, on a daily basis.
Part 2: All persons operating, repairing or maintaining these boilers, pressure vessels, engines,
and their appurtenances do so under the direct authority of the engineer in charge. The engineer
in charge will leave daily written instructions to the operating personnel and those instructions
will be made available to the District Engineering Inspector upon requ
522 CMR: Board of Boiler Rules
What is Section 2.03 and what are the essentials? correct answers 522 CMR 2.00: Power Boilers
Section 2.03: construction.
Manual devices and switches that allow the bypass of any safety control are prohibited unless
such device or switch is provided with a "dead-man" capability that ensures that the operator is
present and responsible when the device or switch is in use. No such device or switch shall have
the capability to fail in the closed position.
What is "dead-man capability?" correct answers Ensures that the operator is present and
responsible when the device or switch is in use. When the device or switch shall have no
capability to fail in the closed position.
, 522 CMR: Board of Boiler Rules
What is Section 2.06 and what are the essentials? correct answers 522 CMR 2.00: Power Boilers
Section 2.06: Inspection.
Field inspection: all high pressure/power boilers shall be thoroughly inspected internally and
externally while under pressure at least once annually in accordance with the 2015 NBIC.
According to ASME, boiler horsepower can be measured three ways. Tell me the three ways and
which section you can find it. correct answers You can find it in 522 CMR: Board of Boiler
Rules, Section 2.06: Inspection or MGL Chapter 146 section 48.
Boiler horsepower can be calculated by using one of the following formulae:
1: the steam output capacity as listed on the manufacturer's tag divided by 34.5.
2: the BTU/hr. input listed on the manufacture's tag divided by 41,840.
3: the BTU/hr. output listed on the manufacturer's tag divided by 33,475.
According to ASME, boiler horsepower can be measured three ways. Tell me the three ways and
which section you can find it. correct answers You can find it in 522 CMR: Board of Boiler
Rules, Section 2.06: Inspection.
Boiler horsepower can be calculated by using one of the following formulae:
Name the 13 headings on the "operator's state log book." correct answers Date, time, continuous
blowdown setting, surface blowdown valves opened, gauge glass blowdown, low water cutoff
tested, safety valve manually tested, auxiliary equipment checked, boiler ignition verified (on
start up), boiler room cleaned, what was the internal conditions observed when the boiler was
opened, operator notes, signature and license number of operator.
What is NBIC? correct answers National board inspection code. The NBIC provides standards
for the installation, inspection, and repair and/or alteration of boilers, pressure vessels, and
pressure relief devices.
What is BPVC? correct answers ASME's Boiler and Pressure Vessel Code.
What is section 7 "Care of Power Boilers." correct answers Provides guidelines to assist those
directly responsible for operating, maintaining, and examining power boilers. Guidelines are also
provided for operation of auxiliary equipment and appliances that affect the safe and reliable
operation of power boilers.
What is CMR? correct answers Code of Massachusetts Regulations. Is the collection of
regulations promoted by various agencies of the commonwealth of Massachusetts. It is the state
counterpart to the national Code of Federal Regulation (CFR).
What is 310 CMR section 7? correct answers Air pollution control.
What are the essential sections of 310 CMR? correct answers 7.01: general regulations to prevent
air pollution.
7.02: emissions limitations list.
522 CMR: Board of Boiler Rules
,What is Section 2.02 and what are the essentials? correct answers 522 CMR 2.00: Power Boilers
2.02: records.
To ensure the proper daily inspection of steam boilers, you should do this:
Part 1: When an engineer or fireman is operating steam boilers or steam engines, he or she is
actually engaged as an assistant to the person in charge, and during his or her hours on duty, he
or she is held responsible for the proper operation of the boilers and engines specified and their
appurtenances. Operators of steam boilers shall complete and sign the Operator's Record Book,
as provided for in M.G.L. c. 146, @ 46A, on a daily basis.
Part 2: All persons operating, repairing or maintaining these boilers, pressure vessels, engines,
and their appurtenances do so under the direct authority of the engineer in charge. The engineer
in charge will leave daily written instructions to the operating personnel and those instructions
will be made available to the District Engineering Inspector upon requ
522 CMR: Board of Boiler Rules
What is Section 2.03 and what are the essentials? correct answers 522 CMR 2.00: Power Boilers
Section 2.03: construction.
Manual devices and switches that allow the bypass of any safety control are prohibited unless
such device or switch is provided with a "dead-man" capability that ensures that the operator is
present and responsible when the device or switch is in use. No such device or switch shall have
the capability to fail in the closed position.
What is "dead-man capability?" correct answers Ensures that the operator is present and
responsible when the device or switch is in use. When the device or switch shall have no
capability to fail in the closed position.
, 522 CMR: Board of Boiler Rules
What is Section 2.06 and what are the essentials? correct answers 522 CMR 2.00: Power Boilers
Section 2.06: Inspection.
Field inspection: all high pressure/power boilers shall be thoroughly inspected internally and
externally while under pressure at least once annually in accordance with the 2015 NBIC.
According to ASME, boiler horsepower can be measured three ways. Tell me the three ways and
which section you can find it. correct answers You can find it in 522 CMR: Board of Boiler
Rules, Section 2.06: Inspection or MGL Chapter 146 section 48.
Boiler horsepower can be calculated by using one of the following formulae:
1: the steam output capacity as listed on the manufacturer's tag divided by 34.5.
2: the BTU/hr. input listed on the manufacture's tag divided by 41,840.
3: the BTU/hr. output listed on the manufacturer's tag divided by 33,475.
According to ASME, boiler horsepower can be measured three ways. Tell me the three ways and
which section you can find it. correct answers You can find it in 522 CMR: Board of Boiler
Rules, Section 2.06: Inspection.
Boiler horsepower can be calculated by using one of the following formulae:
