Alabama Fire Sprinkler Contractor
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant
Download Pdf.
1. Under Alabama law, which state official is responsible for issuing
permits to qualified fire protection sprinkler contractors?
A. Alabama Licensing Board for General Contractors
B. Alabama Plumbers and Gas Fitters Examining Board
C. State Fire Marshal
D. Alabama Department of Labor
The Alabama Fire Protection Sprinkler Systems Act places the permitting
authority with the State Fire Marshal. A contractor must qualify and
obtain the required State Fire Marshal permit before performing
regulated sprinkler contracting work.
2. Which activity is generally included within the regulated scope of a
Fire Protection Sprinkler Contractor I in Alabama?
A. Only residential sprinkler inspection
B. Only fire pump maintenance
C. Layout, installation, repair, alteration, addition, maintenance, and
,inspection of fire protection sprinkler systems
D. Only testing of portable fire extinguishers
Contractor I has the broadest sprinkler-system scope and may perform
layout, installation, repair, alteration, additions, maintenance, and
inspection of fire protection sprinkler systems.
3. What competency credential is specifically required for the
proposed certificate holder of an Alabama Fire Protection Sprinkler
Contractor I?
A. NICET Level I
B. NICET Level II
C. NICET Fire Protection Layout Technician—Level III
D. NICET Level IV only
Alabama law requires the proposed Contractor I certificate holder to
provide proof of passing the NICET Fire Protection Layout Technician—
Level III competency examination.
4. What is the application fee specified by Alabama law for a Fire
Protection Sprinkler Contractor I permit?
A. $50
B. $75
C. $120
D. $250
,The Alabama statute specifies a $120 application fee for a Fire
Protection Sprinkler Contractor I permit. The administrative rules also
establish $120 for the initial and annual renewal fee.
5. Which qualification is specifically associated with a Fire Protection
Sprinkler Contractor II certificate holder in Alabama?
A. NICET Level I certification
B. Journeyman electrician certification
C. Valid Alabama master plumber certification
D. Certified fire investigator status
For Contractor II, Alabama requires the designated certificate holder to
hold a valid master plumber certification issued by the Alabama
Plumbers and Gas Fitters Examining Board.
6. Contractor II is primarily associated with what type of sprinkler
work?
A. High-rise commercial systems of every type
B. Industrial foam systems exclusively
C. Residential fire sprinkler systems
D. Portable fire-extinguisher systems
Contractor II is established for residential fire sprinkler services and
carries requirements specifically addressing residential systems,
including training and design capability.
7. Before qualifying as an Alabama Contractor II, how much residential
fire sprinkler training is required under the statute?
, A. 8 hours
B. 16 hours
C. At least 32 hours
D. At least 80 hours
The statute requires a minimum of 32 hours of training covering
residential fire sprinkler systems, including NFPA 13D or ICC P2904,
through an approved third-party agency.
8. Which examination is specifically identified for Alabama Fire
Protection Sprinkler Contractor II applicants?
A. NICET Level IV Water-Based Systems Examination
B. Alabama Master Electrician Examination
C. ICC Residential Fire Sprinkler Design/Installation Test
D. NFPA Certified Fire Inspector examination
Contractor II applicants must pass the ICC Residential Fire Sprinkler
Design/Installation Test as part of the qualification requirements.
9. A Contractor II certificate holder must be capable of producing plans
for which systems?
A. NFPA 13 and NFPA 16 systems only
B. NFPA 20 fire pumps only
C. NFPA 13D or ICC P2904 home fire sprinkler systems
D. NFPA 25 inspection reports only
Alabama requires Contractor II applicants to demonstrate the ability to
produce plans for a 13D or ICC P2904 home fire sprinkler system.
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2027 Q&A| Instant
Download Pdf.
1. Under Alabama law, which state official is responsible for issuing
permits to qualified fire protection sprinkler contractors?
A. Alabama Licensing Board for General Contractors
B. Alabama Plumbers and Gas Fitters Examining Board
C. State Fire Marshal
D. Alabama Department of Labor
The Alabama Fire Protection Sprinkler Systems Act places the permitting
authority with the State Fire Marshal. A contractor must qualify and
obtain the required State Fire Marshal permit before performing
regulated sprinkler contracting work.
2. Which activity is generally included within the regulated scope of a
Fire Protection Sprinkler Contractor I in Alabama?
A. Only residential sprinkler inspection
B. Only fire pump maintenance
C. Layout, installation, repair, alteration, addition, maintenance, and
,inspection of fire protection sprinkler systems
D. Only testing of portable fire extinguishers
Contractor I has the broadest sprinkler-system scope and may perform
layout, installation, repair, alteration, additions, maintenance, and
inspection of fire protection sprinkler systems.
3. What competency credential is specifically required for the
proposed certificate holder of an Alabama Fire Protection Sprinkler
Contractor I?
A. NICET Level I
B. NICET Level II
C. NICET Fire Protection Layout Technician—Level III
D. NICET Level IV only
Alabama law requires the proposed Contractor I certificate holder to
provide proof of passing the NICET Fire Protection Layout Technician—
Level III competency examination.
4. What is the application fee specified by Alabama law for a Fire
Protection Sprinkler Contractor I permit?
A. $50
B. $75
C. $120
D. $250
,The Alabama statute specifies a $120 application fee for a Fire
Protection Sprinkler Contractor I permit. The administrative rules also
establish $120 for the initial and annual renewal fee.
5. Which qualification is specifically associated with a Fire Protection
Sprinkler Contractor II certificate holder in Alabama?
A. NICET Level I certification
B. Journeyman electrician certification
C. Valid Alabama master plumber certification
D. Certified fire investigator status
For Contractor II, Alabama requires the designated certificate holder to
hold a valid master plumber certification issued by the Alabama
Plumbers and Gas Fitters Examining Board.
6. Contractor II is primarily associated with what type of sprinkler
work?
A. High-rise commercial systems of every type
B. Industrial foam systems exclusively
C. Residential fire sprinkler systems
D. Portable fire-extinguisher systems
Contractor II is established for residential fire sprinkler services and
carries requirements specifically addressing residential systems,
including training and design capability.
7. Before qualifying as an Alabama Contractor II, how much residential
fire sprinkler training is required under the statute?
, A. 8 hours
B. 16 hours
C. At least 32 hours
D. At least 80 hours
The statute requires a minimum of 32 hours of training covering
residential fire sprinkler systems, including NFPA 13D or ICC P2904,
through an approved third-party agency.
8. Which examination is specifically identified for Alabama Fire
Protection Sprinkler Contractor II applicants?
A. NICET Level IV Water-Based Systems Examination
B. Alabama Master Electrician Examination
C. ICC Residential Fire Sprinkler Design/Installation Test
D. NFPA Certified Fire Inspector examination
Contractor II applicants must pass the ICC Residential Fire Sprinkler
Design/Installation Test as part of the qualification requirements.
9. A Contractor II certificate holder must be capable of producing plans
for which systems?
A. NFPA 13 and NFPA 16 systems only
B. NFPA 20 fire pumps only
C. NFPA 13D or ICC P2904 home fire sprinkler systems
D. NFPA 25 inspection reports only
Alabama requires Contractor II applicants to demonstrate the ability to
produce plans for a 13D or ICC P2904 home fire sprinkler system.
