Nicet Fire Alarm Level 1 Q & As (Verified
Answers) 2026 Update
Break locks prevent - Correct Answers ✅a non-energized
break from being turned on by an unauthorized person.
Hard hats must be worn on the job only if people are working
above you or it is possible an object may fall on you. -
Correct Answers ✅False
What is not true regarding noise exposure limits set by osha?
- Correct Answers ✅When the daily noise exposure is
composed of two or more periods of noise exposure of
different levels, the maximum sound shall be used.
When the scaffolds working platform reaches a certain height
above the ground, handrails and toe guards are required,
what is that height in feet? - Correct Answers ✅10
Who is responsible for the development and maintenance of
an effective fire protection and prevention program at the fire
alarm installation job site? - Correct Answers ✅the alarm
contractor
What is the maximum distance from the wall permitted for
the bottom of an 18 foot ladder when leaning against a wall?
- Correct Answers ✅4-1/2 feet
A tool belt is an example of a PPE? - Correct Answers
✅False
,Nicet Fire Alarm Level 1 Q & As (Verified
Answers) 2026 Update
Can a type I industrial step ladder be made of wood? -
Correct Answers ✅Yes
What is the height limit of Type II commercial step ladders? -
Correct Answers ✅12 feet
Are you and your assistant required to wear eye protection
when using an explosive actuated fastening tool? - Correct
Answers ✅Yes
Scaffold planks shall be replaced if they have been used for
ground support, have any splits, or have layers or paint,
plaster, etc. - Correct Answers ✅True
The total allowable sound pressure level produced by
combining the ambient sound pressure and all audible
notification appliances operating was lowered in the 2007
edition to what db level and what is the length of time OSHA
permits workers to be exposed to these levels per eight hour
work day? - Correct Answers ✅110db and 1/2 hour
Scaffolds and their components shall be capable of
supporting without failure, at least _______ times their
maximum intended load? - Correct Answers ✅four
, Nicet Fire Alarm Level 1 Q & As (Verified
Answers) 2026 Update
On a powered scissor lift, per OSHA a personal fall system is
required. - Correct Answers ✅False
For safety, is it permitted to use a rope to tie off the bottom
of a ladder to the building structure? - Correct Answers
✅True
How many feet above the roof must your ladder extend when
using the ladder to access the roof? - Correct Answers ✅3
feet
Monitoring for integrity of a circuit is not required if a single
open or ground-fault causes an alarm signal. - Correct
Answers ✅False
The circuit disconnecting means for a fire alarm system to the
light and power service shall _____ - Correct Answers
✅have a red marking and identified as "FIRE ALARM"
On a Class B Initiating Device Circuit, which devices on the
circuit will remain operational during a single open trouble
condition? - Correct Answers ✅Device located up to
(before) a single open condition
When installing a 2-wire smoke detector with separate IN and
OUT terminals for the positive wire, what would be the result
of installing both the incoming and outgoing positive wires
Answers) 2026 Update
Break locks prevent - Correct Answers ✅a non-energized
break from being turned on by an unauthorized person.
Hard hats must be worn on the job only if people are working
above you or it is possible an object may fall on you. -
Correct Answers ✅False
What is not true regarding noise exposure limits set by osha?
- Correct Answers ✅When the daily noise exposure is
composed of two or more periods of noise exposure of
different levels, the maximum sound shall be used.
When the scaffolds working platform reaches a certain height
above the ground, handrails and toe guards are required,
what is that height in feet? - Correct Answers ✅10
Who is responsible for the development and maintenance of
an effective fire protection and prevention program at the fire
alarm installation job site? - Correct Answers ✅the alarm
contractor
What is the maximum distance from the wall permitted for
the bottom of an 18 foot ladder when leaning against a wall?
- Correct Answers ✅4-1/2 feet
A tool belt is an example of a PPE? - Correct Answers
✅False
,Nicet Fire Alarm Level 1 Q & As (Verified
Answers) 2026 Update
Can a type I industrial step ladder be made of wood? -
Correct Answers ✅Yes
What is the height limit of Type II commercial step ladders? -
Correct Answers ✅12 feet
Are you and your assistant required to wear eye protection
when using an explosive actuated fastening tool? - Correct
Answers ✅Yes
Scaffold planks shall be replaced if they have been used for
ground support, have any splits, or have layers or paint,
plaster, etc. - Correct Answers ✅True
The total allowable sound pressure level produced by
combining the ambient sound pressure and all audible
notification appliances operating was lowered in the 2007
edition to what db level and what is the length of time OSHA
permits workers to be exposed to these levels per eight hour
work day? - Correct Answers ✅110db and 1/2 hour
Scaffolds and their components shall be capable of
supporting without failure, at least _______ times their
maximum intended load? - Correct Answers ✅four
, Nicet Fire Alarm Level 1 Q & As (Verified
Answers) 2026 Update
On a powered scissor lift, per OSHA a personal fall system is
required. - Correct Answers ✅False
For safety, is it permitted to use a rope to tie off the bottom
of a ladder to the building structure? - Correct Answers
✅True
How many feet above the roof must your ladder extend when
using the ladder to access the roof? - Correct Answers ✅3
feet
Monitoring for integrity of a circuit is not required if a single
open or ground-fault causes an alarm signal. - Correct
Answers ✅False
The circuit disconnecting means for a fire alarm system to the
light and power service shall _____ - Correct Answers
✅have a red marking and identified as "FIRE ALARM"
On a Class B Initiating Device Circuit, which devices on the
circuit will remain operational during a single open trouble
condition? - Correct Answers ✅Device located up to
(before) a single open condition
When installing a 2-wire smoke detector with separate IN and
OUT terminals for the positive wire, what would be the result
of installing both the incoming and outgoing positive wires
