Home Inspector National Exam Prep
_______ is a gain or right for which the events to a contract have to good buy.
A. Consideration
B. Act of God
C. Lis pendens
D. Contractual Indemnification - ANS-Consideration
"Double-tapping" is ____________.
A. The time period for connecting wires in a wire nut earlier than connecting them to a breaker
or fuse
B. An authorized method for extending a provider panel's capability
C. The term for attaching two wires to a unmarried fuse or breaker terminal
D. The certified method for installing a sub-panel
E. Now not ideal until the equal wide variety of taps arise on one bus as the alternative -
ANS-The time period for attaching two wires to a single fuse or breaker terminal
34. All of the subsequent are not unusual wood siding kinds besides
A. Flemish bond.
B. Bevel
C. Board and batten
D. Tongue and groove - ANS-A. Flemish bond (is a brick sample)
A "Channel and drop" is a form of __________.
A, approach for measuring a homesite
B. Wooden siding
C. Method for digging
D. Irrigation ditches and laying in pipe
E. Method for putting in home windows - ANS-timber siding
A "move connection" is a bodily connection among electric circuits. - ANS-False
A "machine" consists of out one or more functions in a structure and is composed of at the least
interacting or interdependent components. - ANS-True
A "machine" does now not carry out one or more feature in a structure and is composed of at
least two interacting or interdependent additives. - ANS-False
, A "technically exhaustive" inspection makes use of measurements, exams, calculations and
devices to gather statistics on the structure under inspection. - ANS-True
A 2,000-watt, 240-volt electric powered heater would draw ________ amps of cutting-edge.
A. 10
B. 7
C. 3.Seventy two
D. 8.33
E. 6.Forty five - ANS-8.33
A three-segment electrical machine has ___ poles.
A. Two
B. 4
C. Six
D. Three - ANS-Three
A 3-pole primary disconnect would possibly indicate ___________.
A. Fused impartial conductor
B. Allowance for future
C. Upgrades
D. Single-section strength
E. That a sub-panel is present - ANS-that a sub-panel is gift
A 8-AWG copper twine corresponds to _____-amp fuse length.
A. 30
B. 40
C. 15
D. 20 - ANS-forty
A 10-AWG copper twine corresponds to ____-amp fuse size.
A. 15
B. 30
C. 40
D. 20 - ANS-30
A 12-AWG copper twine corresponds to ____-amp fuse length.
A. 20
B. 30
_______ is a gain or right for which the events to a contract have to good buy.
A. Consideration
B. Act of God
C. Lis pendens
D. Contractual Indemnification - ANS-Consideration
"Double-tapping" is ____________.
A. The time period for connecting wires in a wire nut earlier than connecting them to a breaker
or fuse
B. An authorized method for extending a provider panel's capability
C. The term for attaching two wires to a unmarried fuse or breaker terminal
D. The certified method for installing a sub-panel
E. Now not ideal until the equal wide variety of taps arise on one bus as the alternative -
ANS-The time period for attaching two wires to a single fuse or breaker terminal
34. All of the subsequent are not unusual wood siding kinds besides
A. Flemish bond.
B. Bevel
C. Board and batten
D. Tongue and groove - ANS-A. Flemish bond (is a brick sample)
A "Channel and drop" is a form of __________.
A, approach for measuring a homesite
B. Wooden siding
C. Method for digging
D. Irrigation ditches and laying in pipe
E. Method for putting in home windows - ANS-timber siding
A "move connection" is a bodily connection among electric circuits. - ANS-False
A "machine" consists of out one or more functions in a structure and is composed of at the least
interacting or interdependent components. - ANS-True
A "machine" does now not carry out one or more feature in a structure and is composed of at
least two interacting or interdependent additives. - ANS-False
, A "technically exhaustive" inspection makes use of measurements, exams, calculations and
devices to gather statistics on the structure under inspection. - ANS-True
A 2,000-watt, 240-volt electric powered heater would draw ________ amps of cutting-edge.
A. 10
B. 7
C. 3.Seventy two
D. 8.33
E. 6.Forty five - ANS-8.33
A three-segment electrical machine has ___ poles.
A. Two
B. 4
C. Six
D. Three - ANS-Three
A 3-pole primary disconnect would possibly indicate ___________.
A. Fused impartial conductor
B. Allowance for future
C. Upgrades
D. Single-section strength
E. That a sub-panel is present - ANS-that a sub-panel is gift
A 8-AWG copper twine corresponds to _____-amp fuse length.
A. 30
B. 40
C. 15
D. 20 - ANS-forty
A 10-AWG copper twine corresponds to ____-amp fuse size.
A. 15
B. 30
C. 40
D. 20 - ANS-30
A 12-AWG copper twine corresponds to ____-amp fuse length.
A. 20
B. 30
