CWEA Collections 3 EXAM Questions
and
Answers Verified Solutions Latest
Update
Question:
You should never attempt to install, maintain, repair or replace electrical equipment
panels, controls, wiring or circuits unless.
Answer:
You know what you are doing, are qualified and are authorized
Question:
What are the different areas of traffic zones?.
Answer:
Advance Warning Area, Transition Area, Activity Area (buffer space and work space),
Termination Area. Could be 4 or 5, justify your answer on the test!
Question:
why should hydrogen sulfide be controlled?.
Answer:
to protect from corrosion and odors
Question:
Personnel entering a Permit Required Confined Space must have the following training.
Answer:
entry and rescue
,Question:
To find protective gear before application of a product, you should:.
Answer:
look at the MSDS
Question:
The gas most commonly associated with septic wastewater is.
Answer:
Hydrogen Sulfide
Question:
The lack of an unpleasant odor in a manhole, lift station or other structures does not
always mean that dangerous gases are not present because:.
Answer:
some dangerous gasses are odorless (for example, carbon monoxide)
Question:
What are the four conditions necessary to create an explosion?.
Answer:
combustible gas, adequate oxygen, heat and proper mixing of gas and oxygen
Question:
what does the "transition area" mean in traffic control?.
Answer:
It moves traffic out of its normal path
Question:
what elements should be considered to improve worker safety in High speed
Temporary Traffic control Zones?.
Answer:
Rerouting traffic around the work site, positioning of law enforcement officers in the
temporary traffic control zone, and work zone training
, Question:
What key features would you need to address when developing an S.O.P. for a Lift
Station failure?.
Answer:
Traffic Control Plan, By-Pass connections, and Spill containment
Question:
What tools are used with a power rodder?.
Answer:
Spring Blades
Question:
Tools used for sewer rodding include:.
Answer:
porcupine, root saw, square bar cork screw
Question:
What tool would you use to cut VCP pipe?.
Answer:
Chain Pipe Cutter
Question:
Which conditions should a gas detection device test for?.
Answer:
Hydrogen sulfide, explosive/flammable gases, oxygen
Question:
What does "LEL" mean on a gas detection meter?.
Answer:
Lower Explosive Limit
and
Answers Verified Solutions Latest
Update
Question:
You should never attempt to install, maintain, repair or replace electrical equipment
panels, controls, wiring or circuits unless.
Answer:
You know what you are doing, are qualified and are authorized
Question:
What are the different areas of traffic zones?.
Answer:
Advance Warning Area, Transition Area, Activity Area (buffer space and work space),
Termination Area. Could be 4 or 5, justify your answer on the test!
Question:
why should hydrogen sulfide be controlled?.
Answer:
to protect from corrosion and odors
Question:
Personnel entering a Permit Required Confined Space must have the following training.
Answer:
entry and rescue
,Question:
To find protective gear before application of a product, you should:.
Answer:
look at the MSDS
Question:
The gas most commonly associated with septic wastewater is.
Answer:
Hydrogen Sulfide
Question:
The lack of an unpleasant odor in a manhole, lift station or other structures does not
always mean that dangerous gases are not present because:.
Answer:
some dangerous gasses are odorless (for example, carbon monoxide)
Question:
What are the four conditions necessary to create an explosion?.
Answer:
combustible gas, adequate oxygen, heat and proper mixing of gas and oxygen
Question:
what does the "transition area" mean in traffic control?.
Answer:
It moves traffic out of its normal path
Question:
what elements should be considered to improve worker safety in High speed
Temporary Traffic control Zones?.
Answer:
Rerouting traffic around the work site, positioning of law enforcement officers in the
temporary traffic control zone, and work zone training
, Question:
What key features would you need to address when developing an S.O.P. for a Lift
Station failure?.
Answer:
Traffic Control Plan, By-Pass connections, and Spill containment
Question:
What tools are used with a power rodder?.
Answer:
Spring Blades
Question:
Tools used for sewer rodding include:.
Answer:
porcupine, root saw, square bar cork screw
Question:
What tool would you use to cut VCP pipe?.
Answer:
Chain Pipe Cutter
Question:
Which conditions should a gas detection device test for?.
Answer:
Hydrogen sulfide, explosive/flammable gases, oxygen
Question:
What does "LEL" mean on a gas detection meter?.
Answer:
Lower Explosive Limit
