CSST Definitions Questions with CORRECT Answers
(Grade A+)
Question 1:
What are abate- Procedures to control fiber release from asbestos-containing
ment proce-
dures?
Answer:
materials.
Question 2:
What is ACM?
Answer:
Asbestos-Containing Material - Any building material which contains asbestos in
an amount greater than 1% by weight, area, or count.
Question 3:
What is ACWM?
Answer:
Asbestos-Containing Waste Material - Any waste that contains or has been conta-
minated by asbestos.
Question 4:
What does ad- Asbestos is 'adequately
equately wet
mean?
Answer:
wet' when it is wet enough so that no particles are released.
Question 5:
What is amended
water?
Answer:
, Water to which a surfactant has been added.
Question 6:
What are Class 4 Activities
maintenance and activities
custodial activi-
ties?
Answer:
during which employees contact but do not disturb ACM and PACM, and
to clean up dust, waste, and debris.
Question 7:
What are Class I Activities involving the removal of TSI and surfacing
activities?
Answer:
ACM and PACM.
Question 8:
What are Class II Activities involving
activities?
Answer:
the removal of ACM which is not TSI or surfacing material.
Question 9:
What are Class Operations
III repair and disturbed.
maintenance op-
erations?
Answer:
where ACM, including TSI and surfacing ACM and PACM, is likely to be
tent person? equipment works on the job.
Question 10:
(Grade A+)
Question 1:
What are abate- Procedures to control fiber release from asbestos-containing
ment proce-
dures?
Answer:
materials.
Question 2:
What is ACM?
Answer:
Asbestos-Containing Material - Any building material which contains asbestos in
an amount greater than 1% by weight, area, or count.
Question 3:
What is ACWM?
Answer:
Asbestos-Containing Waste Material - Any waste that contains or has been conta-
minated by asbestos.
Question 4:
What does ad- Asbestos is 'adequately
equately wet
mean?
Answer:
wet' when it is wet enough so that no particles are released.
Question 5:
What is amended
water?
Answer:
, Water to which a surfactant has been added.
Question 6:
What are Class 4 Activities
maintenance and activities
custodial activi-
ties?
Answer:
during which employees contact but do not disturb ACM and PACM, and
to clean up dust, waste, and debris.
Question 7:
What are Class I Activities involving the removal of TSI and surfacing
activities?
Answer:
ACM and PACM.
Question 8:
What are Class II Activities involving
activities?
Answer:
the removal of ACM which is not TSI or surfacing material.
Question 9:
What are Class Operations
III repair and disturbed.
maintenance op-
erations?
Answer:
where ACM, including TSI and surfacing ACM and PACM, is likely to be
tent person? equipment works on the job.
Question 10:
