EDF 6221 EXAM 1 QUESTIONS AND 100
PERCENT CORRECT ANSWERS LATEST
UPDATE VERIFIED FULL SOLUTION
GRADED A+
⩥ Daily operations, objectives, times, and locations are considered
_________ with unauthorized personnel.
Answer: critical information that should not be shared
⩥ What are the requirements to be awarded the 5-skill level,
Journeyman?
Answer: 1 year OJT and 5-skill Career Development Course (CDC)
⩥ Which chapter in DAFMAN 91-203, Air Force Occupational Safety
Fire and Health Standards, provides guidance on electrical safety?
Answer: Chapter 8
⩥ _______ is required for all personnel assigned to the flight-line.
Answer: Cardiopulmonary Resuscitation (CPR) and Tactical Combat
Casualty Care (TCCC)
⩥ What is the requirement to attain the title 9-skill level Superintendent?
,Answer: Minimum rank of SMSgt, completion of the Advanced
Armament Systems Course
⩥ What Major Command (MAJCOM) would weapons personnel be
assigned to if they are testing new weapon systems?
Answer: Air Force Material Command (AFMC)
⩥ Which of the following is one of the three elements that a 2W1 may
be assigned to?
Answer: weapons loading element
⩥ If you notice any unusual behavior it should be reported in accordance
with _________.
Answer: standard operating procedures (SOPs)
⩥ Which of the following are areas of vulnerability for Operations
Security (OPSEC)?
Answer: Munitions deliveries, Communications, Daily Operations
⩥ In a parallel circuit __________________ is applied simultaneously
across all devices in the circuit.
Answer: the same voltage output
⩥ A _____________ requires a 90 degree clockwise twist to couple.
,Answer: Breech coupling connector
⩥ When repairing braided shield wire if the hole in the braiding is
______ or less of the wiring harness diameter use ____________.
Answer: 50%, self-bonding silicon tape
⩥ When resistance is increased in a circuit, current is____________.
Answer: decreased
⩥ The phase inspection concept is designed to ___________ by
consolidating aspects of a Basic Post Flight (BPO) and Periodic
Inspection (PE).
Answer: Minimize aircraft downtime
⩥ Where is completion of work area-specific Hazard Communication
(HAZCOM) training documented?
Answer: AF 55 Employee Safety and Health Record
⩥ Which Air Force instruction provides guidance for proper handling of
hazardous material by all personnel that may be exposed?
Answer: AFI 90-821, Hazard Communication Program
⩥ To apply for a RAB, you must request an _______ from your security
manager.
, Answer: AF Form 2586
⩥ All are signs of electrical shock EXCEPT ___________.
Answer: having a rapid pulse
⩥ Alternating Current (AC) continually changes in amplitude and
______________ reverses direction.
Answer: periodically
⩥ Normally, slack between support points should NOT exceed
________.
Answer: 0.5 inch
⩥ If someone comes up while you are performing first aid for an
electrical shock victim, send them to get ___________.
Answer: an Automated External Defibrillator (AED)
⩥ Where can you find a list of all hazardous chemicals present in your
work area?
Answer: Area-specific Hazard Communication (HAZCOM) program
⩥ What inspection is performed between flight inspection of aircraft
components when an immediate turnaround or continuation flight is
scheduled?
PERCENT CORRECT ANSWERS LATEST
UPDATE VERIFIED FULL SOLUTION
GRADED A+
⩥ Daily operations, objectives, times, and locations are considered
_________ with unauthorized personnel.
Answer: critical information that should not be shared
⩥ What are the requirements to be awarded the 5-skill level,
Journeyman?
Answer: 1 year OJT and 5-skill Career Development Course (CDC)
⩥ Which chapter in DAFMAN 91-203, Air Force Occupational Safety
Fire and Health Standards, provides guidance on electrical safety?
Answer: Chapter 8
⩥ _______ is required for all personnel assigned to the flight-line.
Answer: Cardiopulmonary Resuscitation (CPR) and Tactical Combat
Casualty Care (TCCC)
⩥ What is the requirement to attain the title 9-skill level Superintendent?
,Answer: Minimum rank of SMSgt, completion of the Advanced
Armament Systems Course
⩥ What Major Command (MAJCOM) would weapons personnel be
assigned to if they are testing new weapon systems?
Answer: Air Force Material Command (AFMC)
⩥ Which of the following is one of the three elements that a 2W1 may
be assigned to?
Answer: weapons loading element
⩥ If you notice any unusual behavior it should be reported in accordance
with _________.
Answer: standard operating procedures (SOPs)
⩥ Which of the following are areas of vulnerability for Operations
Security (OPSEC)?
Answer: Munitions deliveries, Communications, Daily Operations
⩥ In a parallel circuit __________________ is applied simultaneously
across all devices in the circuit.
Answer: the same voltage output
⩥ A _____________ requires a 90 degree clockwise twist to couple.
,Answer: Breech coupling connector
⩥ When repairing braided shield wire if the hole in the braiding is
______ or less of the wiring harness diameter use ____________.
Answer: 50%, self-bonding silicon tape
⩥ When resistance is increased in a circuit, current is____________.
Answer: decreased
⩥ The phase inspection concept is designed to ___________ by
consolidating aspects of a Basic Post Flight (BPO) and Periodic
Inspection (PE).
Answer: Minimize aircraft downtime
⩥ Where is completion of work area-specific Hazard Communication
(HAZCOM) training documented?
Answer: AF 55 Employee Safety and Health Record
⩥ Which Air Force instruction provides guidance for proper handling of
hazardous material by all personnel that may be exposed?
Answer: AFI 90-821, Hazard Communication Program
⩥ To apply for a RAB, you must request an _______ from your security
manager.
, Answer: AF Form 2586
⩥ All are signs of electrical shock EXCEPT ___________.
Answer: having a rapid pulse
⩥ Alternating Current (AC) continually changes in amplitude and
______________ reverses direction.
Answer: periodically
⩥ Normally, slack between support points should NOT exceed
________.
Answer: 0.5 inch
⩥ If someone comes up while you are performing first aid for an
electrical shock victim, send them to get ___________.
Answer: an Automated External Defibrillator (AED)
⩥ Where can you find a list of all hazardous chemicals present in your
work area?
Answer: Area-specific Hazard Communication (HAZCOM) program
⩥ What inspection is performed between flight inspection of aircraft
components when an immediate turnaround or continuation flight is
scheduled?
