Nccer electrical q
Nccer electrical
Study online at https://quizlet.com/_hkojng
1. Resonant grounded systems typically require an 173%
insulation level of
2. What is normally the final step in a high voltage Rejacketing
cable splice
3. What are the two materials normally used to con- Semicon and metallic material
struct insulation shielding systems
4. Which of the following cable configurations has Compact stranding
the smallest overall diameter for the same
amount of current-carrying ability
5. When air breaks down or ionizes, it produces Corona discharges
6. The main difference between AC and DC current Provides true simulation of oper-
testing is that AC testing ating conditions
7. Which of the following can render a high voltage Foreign matter
splice useless
8. When splicing aluminum conductors which of the Antioxide paste
following should be applied to the contact
9. Which of the following best describes the semi- Strand shielding
conductor layer between the conductor and insu-
lation that compensates for air voids between the
materials
10. Medium-voltage cable is rated at 2,000V to 35,000V
11. Item C in figure RQ01 represents a Grounded conductor
1/6
, Nccer electrical q
Nccer electrical
Study online at https://quizlet.com/_hkojng
12. Item E in figure RQ01 represents a Grounded electrode conductor
13. The conducting connection whether intentional Short circuit
or accidental between any of the conductors of
an electrical system is known as a
14. Item B figure RQ01 represents an Ungrounded conductor
15. Item F in figure RQ01 represents a Main bonding jumper
2/6
Nccer electrical
Study online at https://quizlet.com/_hkojng
1. Resonant grounded systems typically require an 173%
insulation level of
2. What is normally the final step in a high voltage Rejacketing
cable splice
3. What are the two materials normally used to con- Semicon and metallic material
struct insulation shielding systems
4. Which of the following cable configurations has Compact stranding
the smallest overall diameter for the same
amount of current-carrying ability
5. When air breaks down or ionizes, it produces Corona discharges
6. The main difference between AC and DC current Provides true simulation of oper-
testing is that AC testing ating conditions
7. Which of the following can render a high voltage Foreign matter
splice useless
8. When splicing aluminum conductors which of the Antioxide paste
following should be applied to the contact
9. Which of the following best describes the semi- Strand shielding
conductor layer between the conductor and insu-
lation that compensates for air voids between the
materials
10. Medium-voltage cable is rated at 2,000V to 35,000V
11. Item C in figure RQ01 represents a Grounded conductor
1/6
, Nccer electrical q
Nccer electrical
Study online at https://quizlet.com/_hkojng
12. Item E in figure RQ01 represents a Grounded electrode conductor
13. The conducting connection whether intentional Short circuit
or accidental between any of the conductors of
an electrical system is known as a
14. Item B figure RQ01 represents an Ungrounded conductor
15. Item F in figure RQ01 represents a Main bonding jumper
2/6
