Arkansas AR/FL Flooring
Contractor Practice Exam |
Questions, Verified Answers &
Detailed Rationales | Complete
Contractor License Exam Prep
Study Guide | Updated 2026
1. What is the primary purpose of a flooring substrate
inspection before installation?
A. To determine the customer's favourite flooring colour
B. To determine the room's lighting level
C. To identify conditions that could affect the flooring
installation
D. To determine the age of the building
Answer: To identify conditions that could affect the
flooring installation
Rationale: The substrate must be evaluated for
moisture, flatness, cleanliness, strength, cracks,
contaminants, and other conditions that can affect the
finished floor.
2. What is the best method for determining the amount
of flooring material required for a rectangular room?
A. Multiply the room's perimeter by its height
B. Multiply the length by the width
C. Divide the length by the width
D. Add the length and width
Answer: Multiply the length by the width
Rationale: Area is calculated by multiplying length by
width. Additional material should then be added for
,waste, cuts, pattern matching, and installation
conditions.
3. A room is 12 feet long and 15 feet wide. What is its
area?
A. 27 square feet
B. 90 square feet
C. 180 square feet
D. 360 square feet
Answer: 180 square feet
Rationale: 12 × 15 = 180 square feet.
4. Why is flooring material commonly ordered with an
allowance for waste?
A. To increase the selling price
B. To account for cutting, defects, pattern matching, and
installation waste
C. To make the flooring heavier
D. To compensate for adhesive drying
Answer: To account for cutting, defects, pattern
matching, and installation waste
Rationale: Flooring cannot normally be installed using
exactly the calculated floor area because cuts, irregular
rooms, pattern matching, and unusable remnants create
waste.
5. Which condition is most likely to cause an adhesive
failure?
A. Properly prepared substrate
B. Correct adhesive coverage
C. Correct adhesive open time
D. Excessive moisture in the substrate
,Answer: Excessive moisture in the substrate
Rationale: Excessive substrate moisture can interfere
with adhesive curing and cause bubbling, debonding,
staining, or other flooring failures.
6. What should be done with a concrete slab containing
excessive moisture before installing moisture-sensitive
flooring?
A. Install the flooring immediately
B. Add more adhesive
C. Identify and correct or properly address the moisture
condition
D. Increase the room temperature only
Answer: Identify and correct or properly address the
moisture condition
Rationale: Moisture problems should be evaluated and
addressed using appropriate testing and manufacturer-
approved corrective methods before installation.
7. What is a common purpose of a concrete moisture
test?
A. To determine concrete color
B. To determine carpet pile height
C. To evaluate whether moisture conditions are suitable
for the flooring system
D. To measure room temperature
Answer: To evaluate whether moisture conditions are
suitable for the flooring system
Rationale: Moisture testing helps determine whether
the slab meets the flooring and adhesive
manufacturer's requirements.
, 8. What should be done if a concrete substrate is visibly
dirty or contaminated with oil?
A. Install directly over it
B. Apply additional adhesive
C. Properly clean and prepare the substrate
D. Cover it with cardboard
Answer: Properly clean and prepare the substrate
Rationale: Oils and other contaminants can prevent
adhesives and underlayments from bonding properly.
9. What is a self-leveling underlayment primarily used
for?
A. Waterproofing every substrate
B. Correcting suitable substrate irregularities and
improving flatness
C. Increasing carpet pile
D. Replacing adhesive
Answer: Correcting suitable substrate irregularities and
improving flatness
Rationale: Self-leveling products are designed to create
a more suitable surface for flooring when used
according to their manufacturer's requirements.
10. What is the primary purpose of a flooring adhesive?
A. To clean the substrate
B. To increase floor height
C. To bond the flooring material to the approved
substrate
D. To eliminate expansion joints
Answer: To bond the flooring material to the approved
substrate
Contractor Practice Exam |
Questions, Verified Answers &
Detailed Rationales | Complete
Contractor License Exam Prep
Study Guide | Updated 2026
1. What is the primary purpose of a flooring substrate
inspection before installation?
A. To determine the customer's favourite flooring colour
B. To determine the room's lighting level
C. To identify conditions that could affect the flooring
installation
D. To determine the age of the building
Answer: To identify conditions that could affect the
flooring installation
Rationale: The substrate must be evaluated for
moisture, flatness, cleanliness, strength, cracks,
contaminants, and other conditions that can affect the
finished floor.
2. What is the best method for determining the amount
of flooring material required for a rectangular room?
A. Multiply the room's perimeter by its height
B. Multiply the length by the width
C. Divide the length by the width
D. Add the length and width
Answer: Multiply the length by the width
Rationale: Area is calculated by multiplying length by
width. Additional material should then be added for
,waste, cuts, pattern matching, and installation
conditions.
3. A room is 12 feet long and 15 feet wide. What is its
area?
A. 27 square feet
B. 90 square feet
C. 180 square feet
D. 360 square feet
Answer: 180 square feet
Rationale: 12 × 15 = 180 square feet.
4. Why is flooring material commonly ordered with an
allowance for waste?
A. To increase the selling price
B. To account for cutting, defects, pattern matching, and
installation waste
C. To make the flooring heavier
D. To compensate for adhesive drying
Answer: To account for cutting, defects, pattern
matching, and installation waste
Rationale: Flooring cannot normally be installed using
exactly the calculated floor area because cuts, irregular
rooms, pattern matching, and unusable remnants create
waste.
5. Which condition is most likely to cause an adhesive
failure?
A. Properly prepared substrate
B. Correct adhesive coverage
C. Correct adhesive open time
D. Excessive moisture in the substrate
,Answer: Excessive moisture in the substrate
Rationale: Excessive substrate moisture can interfere
with adhesive curing and cause bubbling, debonding,
staining, or other flooring failures.
6. What should be done with a concrete slab containing
excessive moisture before installing moisture-sensitive
flooring?
A. Install the flooring immediately
B. Add more adhesive
C. Identify and correct or properly address the moisture
condition
D. Increase the room temperature only
Answer: Identify and correct or properly address the
moisture condition
Rationale: Moisture problems should be evaluated and
addressed using appropriate testing and manufacturer-
approved corrective methods before installation.
7. What is a common purpose of a concrete moisture
test?
A. To determine concrete color
B. To determine carpet pile height
C. To evaluate whether moisture conditions are suitable
for the flooring system
D. To measure room temperature
Answer: To evaluate whether moisture conditions are
suitable for the flooring system
Rationale: Moisture testing helps determine whether
the slab meets the flooring and adhesive
manufacturer's requirements.
, 8. What should be done if a concrete substrate is visibly
dirty or contaminated with oil?
A. Install directly over it
B. Apply additional adhesive
C. Properly clean and prepare the substrate
D. Cover it with cardboard
Answer: Properly clean and prepare the substrate
Rationale: Oils and other contaminants can prevent
adhesives and underlayments from bonding properly.
9. What is a self-leveling underlayment primarily used
for?
A. Waterproofing every substrate
B. Correcting suitable substrate irregularities and
improving flatness
C. Increasing carpet pile
D. Replacing adhesive
Answer: Correcting suitable substrate irregularities and
improving flatness
Rationale: Self-leveling products are designed to create
a more suitable surface for flooring when used
according to their manufacturer's requirements.
10. What is the primary purpose of a flooring adhesive?
A. To clean the substrate
B. To increase floor height
C. To bond the flooring material to the approved
substrate
D. To eliminate expansion joints
Answer: To bond the flooring material to the approved
substrate
