LADWP Electrical Craft Helper Test |
COMPREHENSIVE EXAM BANK WITH ACTUAL
QUESTIONS AND CORRECT VERIFIED
ANSWERS AND WELL ELLABORATED
RATIONALES.
1. According to the paragraph, which of the following is true
about sawing versus milling?
A) Milling is more wasteful than sawing for any operation
B) For some jobs, saws are the most useful metal working
tools
C) Sawing is not as accurate as milling
D) Saws remove metal by cutting, whereas mills remove it
by shearing
Correct Answer: B
Rationale: The paragraph states that sawing can be faster
and use less power than other methods, and material can be
saved. It does not claim saws are more accurate or that
milling is always more wasteful. The paragraph supports
that for some jobs, saws are the most useful tools.
2. Metal is removed in sawing and filing by the action of:
A) A single large cutting edge
B) Many small teeth
C) Abrasive particles
,D) Chemical reaction
Correct Answer: B
Rationale: The passage states: "Metal is removed in sawing
and filing by the action of many small teeth." This is the
defining characteristic of sawing and filing operations.
3. According to the passage, a saw can sever a sizable
chunk of metal with:
A) A large amount of cutting
B) A minimum amount of cutting
C) No cutting at all
D) Extreme pressure
Correct Answer: B
Rationale: The passage states: "Saw teeth act in a narrow
line, and a saw can sever a sizable chunk of metal with a
minimum amount of cutting." This makes sawing efficient for
certain operations.
4. The passage states that sawing can be faster and use
less power than other methods because:
A) Saws are made of stronger metal
B) The saw acts on only a small part of the material
C) Saws use electricity
D) Saws are sharper than other tools
Correct Answer: B
,Rationale: The passage states: "The same piece may be cut
off or out by a saw acting on only a small part of the
material." This is why sawing can be faster and use less
power than other methods.
5. What is the main advantage of sawing over milling,
according to the passage?
A) Sawing is more accurate
B) Sawing wastes less material and uses less power
C) Sawing is easier to learn
D) Sawing requires less skill
Correct Answer: B
Rationale: The passage states that sawing can save
material and work can be done faster and with less power. It
does not claim sawing is more accurate or easier.
6. If the following banks were filed in correct alphabetical
order, which would be fourth?
A) Bank of California
B) Security 1st National Bank
C) 3rd National Bank
D) Savings and Loan Bank
Correct Answer: B
Rationale: Alphabetical filing ignores numbers, punctuation,
and symbols. The correct order is: 3rd National Bank (filed
as "Third"), Bank of California, Savings and Loan Bank,
, Security 1st National Bank. Therefore, Security 1st National
Bank is fourth.
7. If the following names were filed in correct alphabetical
order, which would be second?
A) Joseph Scogna
B) Paula Scola
C) Louis Scofield
D) John Scognos
Correct Answer: A
Rationale: Alphabetical order is based on letter-by-letter
comparison. The correct order is: Joseph Scogna (Scogna),
John Scognos (Scognos), Paula Scola (Scola), Louis
Scofield (Scofield). Joseph Scogna is second when
arranged correctly. Note: Scogna vs Scognos - "Scogn" vs
"Scog" - Scogna comes before Scognos because "a" comes
before "n".
8. If the following names are arranged in correct ascending
alphabetical filing order, which will be third?
A) Engineers & Architects Assn. of So. Calif.
B) Engineering Service Corp.
C) Engineering Products Co.
D) Engine Supply Co.
Correct Answer: B
COMPREHENSIVE EXAM BANK WITH ACTUAL
QUESTIONS AND CORRECT VERIFIED
ANSWERS AND WELL ELLABORATED
RATIONALES.
1. According to the paragraph, which of the following is true
about sawing versus milling?
A) Milling is more wasteful than sawing for any operation
B) For some jobs, saws are the most useful metal working
tools
C) Sawing is not as accurate as milling
D) Saws remove metal by cutting, whereas mills remove it
by shearing
Correct Answer: B
Rationale: The paragraph states that sawing can be faster
and use less power than other methods, and material can be
saved. It does not claim saws are more accurate or that
milling is always more wasteful. The paragraph supports
that for some jobs, saws are the most useful tools.
2. Metal is removed in sawing and filing by the action of:
A) A single large cutting edge
B) Many small teeth
C) Abrasive particles
,D) Chemical reaction
Correct Answer: B
Rationale: The passage states: "Metal is removed in sawing
and filing by the action of many small teeth." This is the
defining characteristic of sawing and filing operations.
3. According to the passage, a saw can sever a sizable
chunk of metal with:
A) A large amount of cutting
B) A minimum amount of cutting
C) No cutting at all
D) Extreme pressure
Correct Answer: B
Rationale: The passage states: "Saw teeth act in a narrow
line, and a saw can sever a sizable chunk of metal with a
minimum amount of cutting." This makes sawing efficient for
certain operations.
4. The passage states that sawing can be faster and use
less power than other methods because:
A) Saws are made of stronger metal
B) The saw acts on only a small part of the material
C) Saws use electricity
D) Saws are sharper than other tools
Correct Answer: B
,Rationale: The passage states: "The same piece may be cut
off or out by a saw acting on only a small part of the
material." This is why sawing can be faster and use less
power than other methods.
5. What is the main advantage of sawing over milling,
according to the passage?
A) Sawing is more accurate
B) Sawing wastes less material and uses less power
C) Sawing is easier to learn
D) Sawing requires less skill
Correct Answer: B
Rationale: The passage states that sawing can save
material and work can be done faster and with less power. It
does not claim sawing is more accurate or easier.
6. If the following banks were filed in correct alphabetical
order, which would be fourth?
A) Bank of California
B) Security 1st National Bank
C) 3rd National Bank
D) Savings and Loan Bank
Correct Answer: B
Rationale: Alphabetical filing ignores numbers, punctuation,
and symbols. The correct order is: 3rd National Bank (filed
as "Third"), Bank of California, Savings and Loan Bank,
, Security 1st National Bank. Therefore, Security 1st National
Bank is fourth.
7. If the following names were filed in correct alphabetical
order, which would be second?
A) Joseph Scogna
B) Paula Scola
C) Louis Scofield
D) John Scognos
Correct Answer: A
Rationale: Alphabetical order is based on letter-by-letter
comparison. The correct order is: Joseph Scogna (Scogna),
John Scognos (Scognos), Paula Scola (Scola), Louis
Scofield (Scofield). Joseph Scogna is second when
arranged correctly. Note: Scogna vs Scognos - "Scogn" vs
"Scog" - Scogna comes before Scognos because "a" comes
before "n".
8. If the following names are arranged in correct ascending
alphabetical filing order, which will be third?
A) Engineers & Architects Assn. of So. Calif.
B) Engineering Service Corp.
C) Engineering Products Co.
D) Engine Supply Co.
Correct Answer: B
