1|Page
ICC California UST Service Technician Verified Questions And
Answers Exam ||Just Out!!!
All manufacture training must be recertified every _______
months or recommended interval time, which ever is shorter. -
ANSWER-36
If all dispensers are running slow on one product you should
check what?
A) all product piping for leaks
B) Filters
C) PLLD Shutdown
D) Shear Valves - ANSWER-A) all product piping for leaks
July 1, 2005 service technicians shall possess which ICC to work
on USTs? - ANSWER-California UST service technician exam
What should you use to check for water in tanks containing
ethanol? - ANSWER-A water finding pace specifically formulated
for alcohol fuels
What are the three sides of the fire triangle? - ANSWER-Fuel,
oxygen, and an ignition source.
,2|Page
During pressure to keep testing which gas is used for testing? -
ANSWER-Nitrogen
(T/F) Product tight means that it is in pervious to the substance
contained as to prevent seepage - ANSWER-True
Automatic line leak detectors need to be tested every ________
months. - ANSWER-12
(T/F) Gasoline has a very high flashpoint - ANSWER-False:
gasoline has a very low flashpoint and is one of the most
dangerous petroleum products because of this.
(T/F) gasoline readily generates flammable vapors and ignites
under typical ambient conditions. - ANSWER-True: this is why
gasoline is one of the most dangerous petroleum products.
(T/F) ATG's are on double wall tanks. - ANSWER-False: ATG's are
on single wall tanks usually above ground and can be used as a
primary method of leak detection if programmed to do so.
,3|Page
(T/F) Fill pipes with red tags a fixed to them can still have fuel
deliveries. - ANSWER-False: red tagged fuel risers cannot except
deliveries until issues have been resolved.
(T/F) Kerosene is the most toxic out of gasoline, diesel, jet fuel,
and kerosene. - ANSWER-False: Gasoline is the most toxic out of
these.
Under dispenser containment was required for all UST systems
by __________ - ANSWER-December 31, 2003
A written statement Indicating SIR results must be submitted to
the agency every months. - ANSWER-Local Agency, 24 Months
Records For performance on release detection systems must be
kept on file for_________ years - ANSWER-5 Years
Records of protection system maintenance must be kept on file
for years? - ANSWER-6.5 years
What is an approved method for non-visual Monitoring for
existing UST systems? - ANSWER-Statistical Inventory
Reconciliation (SIR)
, 4|Page
A written statement indicating SIR results must be submitted to
the _________ agency every_________months - ANSWER-local
agency, 12 months
Cathodic Protection systems must be tested within ________
months of installation and every _________ months thereafter.
- ANSWER-6 months, 36 months thereafter
When was it required for all products pressurised piping to have
secondary containment? - ANSWER-July 1, 1987
Which type of releases must be reported to the local agency? -
ANSWER-Anything Greater than 25 gallons.
Positive shut off overfill protection device must stop the flow of
fuel when the tank is no more than __________ percent full. -
ANSWER-95%
If and on authorised product release meets the requirements
for reporting to the local agency, verbal notification must be
made within _________ hours, followed by a written
notification within ________ days. - ANSWER-24 hours, 5 days
ICC California UST Service Technician Verified Questions And
Answers Exam ||Just Out!!!
All manufacture training must be recertified every _______
months or recommended interval time, which ever is shorter. -
ANSWER-36
If all dispensers are running slow on one product you should
check what?
A) all product piping for leaks
B) Filters
C) PLLD Shutdown
D) Shear Valves - ANSWER-A) all product piping for leaks
July 1, 2005 service technicians shall possess which ICC to work
on USTs? - ANSWER-California UST service technician exam
What should you use to check for water in tanks containing
ethanol? - ANSWER-A water finding pace specifically formulated
for alcohol fuels
What are the three sides of the fire triangle? - ANSWER-Fuel,
oxygen, and an ignition source.
,2|Page
During pressure to keep testing which gas is used for testing? -
ANSWER-Nitrogen
(T/F) Product tight means that it is in pervious to the substance
contained as to prevent seepage - ANSWER-True
Automatic line leak detectors need to be tested every ________
months. - ANSWER-12
(T/F) Gasoline has a very high flashpoint - ANSWER-False:
gasoline has a very low flashpoint and is one of the most
dangerous petroleum products because of this.
(T/F) gasoline readily generates flammable vapors and ignites
under typical ambient conditions. - ANSWER-True: this is why
gasoline is one of the most dangerous petroleum products.
(T/F) ATG's are on double wall tanks. - ANSWER-False: ATG's are
on single wall tanks usually above ground and can be used as a
primary method of leak detection if programmed to do so.
,3|Page
(T/F) Fill pipes with red tags a fixed to them can still have fuel
deliveries. - ANSWER-False: red tagged fuel risers cannot except
deliveries until issues have been resolved.
(T/F) Kerosene is the most toxic out of gasoline, diesel, jet fuel,
and kerosene. - ANSWER-False: Gasoline is the most toxic out of
these.
Under dispenser containment was required for all UST systems
by __________ - ANSWER-December 31, 2003
A written statement Indicating SIR results must be submitted to
the agency every months. - ANSWER-Local Agency, 24 Months
Records For performance on release detection systems must be
kept on file for_________ years - ANSWER-5 Years
Records of protection system maintenance must be kept on file
for years? - ANSWER-6.5 years
What is an approved method for non-visual Monitoring for
existing UST systems? - ANSWER-Statistical Inventory
Reconciliation (SIR)
, 4|Page
A written statement indicating SIR results must be submitted to
the _________ agency every_________months - ANSWER-local
agency, 12 months
Cathodic Protection systems must be tested within ________
months of installation and every _________ months thereafter.
- ANSWER-6 months, 36 months thereafter
When was it required for all products pressurised piping to have
secondary containment? - ANSWER-July 1, 1987
Which type of releases must be reported to the local agency? -
ANSWER-Anything Greater than 25 gallons.
Positive shut off overfill protection device must stop the flow of
fuel when the tank is no more than __________ percent full. -
ANSWER-95%
If and on authorised product release meets the requirements
for reporting to the local agency, verbal notification must be
made within _________ hours, followed by a written
notification within ________ days. - ANSWER-24 hours, 5 days
