NICET level 1 Exam Questions With Accurate
Answers 2025\2026 A+ Grade
What’s the maximum coverage area of any fire sprinkler?
- accurate answers-225sqft
NFPA 14
- accurate answers-Standard for the Installation of Standpipe and Hose
Systems
NFPA 15
- accurate answers-Standard for Water Spray Fixed Systems for Fire
Protection
When was OSHA founded and what does ti stand for?
- accurate answers-1971 - the occupational safety and health administration
OSHA part 1910?
- accurate answers-Applies to the general industry
OSHA part 1926?
- accurate answers-Sets forth the safety and health standards under section
107 of the contract work hours and safety standards act
In general the OSHA requirments you must follow are?
- accurate answers-Properly use PPE
Be aware of all hazards
Conduct work safely
Leave the site unhurt each day
A floor opening measures how much in its least dimension in any floor,
platform, pavement, or yard?
- accurate answers-12"
A walking/working surface is defined as?
- accurate answers-Any surface, whether horizontal or verticle on which an
employee walks or work
,A walking/working surface is not?
- accurate answers-Ladders, vehicles, trailers
A fall hazard exist when the fall distance is ____ or more
- accurate answers-6'
What is the leading cause of occupational fatalities and injuries, according to
OSHA?
- accurate answers-Falls from portable ladders (step, straight, combination,
extension)
A stairway or ladder shall be provided at all personnel points of access where
there is a break in elevation of ____ or more
- accurate answers-19"
An A-frame ladder must be able to support ____ times the intended load
- accurate answers-3.3
The distance between the base of the ladder and the wall or support must be
approximately ___ the length of the ladder. This is equal to a ____ degree angle
- accurate answers-1/4 and 75.5
PPE equipment?
- accurate answers-PPE for eyes, face, head, and extremities
Protective clothing
Respiratory devices
Protective shields and barriers
Employee owned equipment
- accurate answers-The employer shall be responsible to assure its adequacy,
including proper maintenance, and sanitation
Each employee shall be trained to know at least the following...
- accurate answers-When PPE is necessary
What PPE is necessary
How to properly put on, take off, adjust, and wear PPE
The limitations of the PPE
THe proper care, maintenance, use life, and disposal of the PPE
,Air filter
- accurate answers-Is a device which removes solid particles from the air, such
as dust, mold, bacteria, and pollen
Respirtor
- accurate answers-Is a self-contained air supply
PPE includes the following...
- accurate answers-Insulating blankets, matting, covers, line hose, gloves,
sleeves to protect the employee from electricity
Hand protection selection is based on the following...
- accurate answers-Task to be performed, conditions present, duration of use,
hazards and potential hazards identified
At ____ decibels, damage to the ear can occur and hearing protection must be
worn
- accurate answers-120 decibels
Employers are responsible for making available PPE or hearing protection to
all employees exposed to an ___ hour time weighted average ___ decibels or
greater
- accurate answers-8 hour and 85 decibels
Employers are responsible for providing an ________ ______________ to all
employees exposed at or above an ___ hour time-weighted average of ____
decibels
- accurate answers-annual audiogram, 8 hours, 85 decibels
Eletrical power operated hand tools shall either be ___________ or ___________
_________________
- accurate answers-Grounded or double insulated
What are the 3 types of burns?
- accurate answers-Thermal, chemical, electrical
How do you treat burns?
- accurate answers-Do not use butter, oils, creams...etc instead use non-steroid
anti-inflammatory drugs (NSAIDs)
, How long can an employee be exposed to an average ambient sound level of
115DBA without hearing protection?
- accurate answers-15min
What should you not do for a victim with a lot of bleeding?
- accurate answers-Use a tourniquet or tie anything that stops the circulation
The primary premise behind OSHA is?
- accurate answers-To provide a safe working environment for employees of a
company
TO show that there is an obligation and responsibility of the employer to
provide first aid training and equipment in the workplace
To communicate that your personal safety is still your individual
responsibility
To set and enforce workplace health and safety standards
Which of the following items should you inspect on an extension cord before
each use?
- accurate answers-Grounding prong & insulation for nicks, cuts, or damages
When drilling in a hole in a 7' wooden stud what eye protection should be
worn?
- accurate answers-Safety goggles
Personal safety is who's responsibility?
- accurate answers-Your responsibility
When working near exposed energized conductors or circuit part, and the
possibility exist that the inspectors tool might contact exposed energized
conductors, the inspector shall?
- accurate answers-Use insulated tools
An individual suffers a deep cut on the upper leg from a blunt force. There is
profuse bleeding from the wound area. What action should be taken first?
- accurate answers-Apply direct pressure to the wound and elevate the leg
Physical shock symptoms
- accurate answers-Dull and sunken eyes
Answers 2025\2026 A+ Grade
What’s the maximum coverage area of any fire sprinkler?
- accurate answers-225sqft
NFPA 14
- accurate answers-Standard for the Installation of Standpipe and Hose
Systems
NFPA 15
- accurate answers-Standard for Water Spray Fixed Systems for Fire
Protection
When was OSHA founded and what does ti stand for?
- accurate answers-1971 - the occupational safety and health administration
OSHA part 1910?
- accurate answers-Applies to the general industry
OSHA part 1926?
- accurate answers-Sets forth the safety and health standards under section
107 of the contract work hours and safety standards act
In general the OSHA requirments you must follow are?
- accurate answers-Properly use PPE
Be aware of all hazards
Conduct work safely
Leave the site unhurt each day
A floor opening measures how much in its least dimension in any floor,
platform, pavement, or yard?
- accurate answers-12"
A walking/working surface is defined as?
- accurate answers-Any surface, whether horizontal or verticle on which an
employee walks or work
,A walking/working surface is not?
- accurate answers-Ladders, vehicles, trailers
A fall hazard exist when the fall distance is ____ or more
- accurate answers-6'
What is the leading cause of occupational fatalities and injuries, according to
OSHA?
- accurate answers-Falls from portable ladders (step, straight, combination,
extension)
A stairway or ladder shall be provided at all personnel points of access where
there is a break in elevation of ____ or more
- accurate answers-19"
An A-frame ladder must be able to support ____ times the intended load
- accurate answers-3.3
The distance between the base of the ladder and the wall or support must be
approximately ___ the length of the ladder. This is equal to a ____ degree angle
- accurate answers-1/4 and 75.5
PPE equipment?
- accurate answers-PPE for eyes, face, head, and extremities
Protective clothing
Respiratory devices
Protective shields and barriers
Employee owned equipment
- accurate answers-The employer shall be responsible to assure its adequacy,
including proper maintenance, and sanitation
Each employee shall be trained to know at least the following...
- accurate answers-When PPE is necessary
What PPE is necessary
How to properly put on, take off, adjust, and wear PPE
The limitations of the PPE
THe proper care, maintenance, use life, and disposal of the PPE
,Air filter
- accurate answers-Is a device which removes solid particles from the air, such
as dust, mold, bacteria, and pollen
Respirtor
- accurate answers-Is a self-contained air supply
PPE includes the following...
- accurate answers-Insulating blankets, matting, covers, line hose, gloves,
sleeves to protect the employee from electricity
Hand protection selection is based on the following...
- accurate answers-Task to be performed, conditions present, duration of use,
hazards and potential hazards identified
At ____ decibels, damage to the ear can occur and hearing protection must be
worn
- accurate answers-120 decibels
Employers are responsible for making available PPE or hearing protection to
all employees exposed to an ___ hour time weighted average ___ decibels or
greater
- accurate answers-8 hour and 85 decibels
Employers are responsible for providing an ________ ______________ to all
employees exposed at or above an ___ hour time-weighted average of ____
decibels
- accurate answers-annual audiogram, 8 hours, 85 decibels
Eletrical power operated hand tools shall either be ___________ or ___________
_________________
- accurate answers-Grounded or double insulated
What are the 3 types of burns?
- accurate answers-Thermal, chemical, electrical
How do you treat burns?
- accurate answers-Do not use butter, oils, creams...etc instead use non-steroid
anti-inflammatory drugs (NSAIDs)
, How long can an employee be exposed to an average ambient sound level of
115DBA without hearing protection?
- accurate answers-15min
What should you not do for a victim with a lot of bleeding?
- accurate answers-Use a tourniquet or tie anything that stops the circulation
The primary premise behind OSHA is?
- accurate answers-To provide a safe working environment for employees of a
company
TO show that there is an obligation and responsibility of the employer to
provide first aid training and equipment in the workplace
To communicate that your personal safety is still your individual
responsibility
To set and enforce workplace health and safety standards
Which of the following items should you inspect on an extension cord before
each use?
- accurate answers-Grounding prong & insulation for nicks, cuts, or damages
When drilling in a hole in a 7' wooden stud what eye protection should be
worn?
- accurate answers-Safety goggles
Personal safety is who's responsibility?
- accurate answers-Your responsibility
When working near exposed energized conductors or circuit part, and the
possibility exist that the inspectors tool might contact exposed energized
conductors, the inspector shall?
- accurate answers-Use insulated tools
An individual suffers a deep cut on the upper leg from a blunt force. There is
profuse bleeding from the wound area. What action should be taken first?
- accurate answers-Apply direct pressure to the wound and elevate the leg
Physical shock symptoms
- accurate answers-Dull and sunken eyes
