• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 4 out of 50 pages
Exam (elaborations)

Basic And Advanced Rigging Practices Exam Full Package

Document preview thumbnail
Preview 4 out of 50 pages

BASIC AND ADVANCED RIGGING PRACTICES EXAM FULL PACKAGE

Content preview

1


BASIC AND ADVANCED RIGGING PRACTICES EXAM
FULL PACKAGE QUESTIONS ANSWERS AND
RATIONALES 2026-27 LATEST VERSION


Subject: Construction and Industrial Rigging
Course Code: RIGG-101

Description:
This comprehensive examination assesses mastery of safe rigging practices for construction,
industrial, and entertainment applications. Candidates will demonstrate knowledge of load
weight estimation, sling angle calculations, rigging hardware identification and inspection,
hitch configurations, and safe lifting procedures. The exam covers wire rope, synthetic, and
chain slings; shackles, hooks, and below-the-hook lifting devices; OSHA and ASME regulatory
requirements; hand and voice signal communication; and emergency procedures. Clinical
decision-making is emphasized through scenario-based questions requiring application of
rigging principles, hazard identification, and regulatory compliance. Questions reflect current
standards including ASME B30 series, OSHA 1910.184 and 1926.251, and NCCCO rigger
certification requirements.



SECTION 1: Questions 1–50
1. A load weighs 4,500 lbs and is being lifted by a single vertical sling.
What is the tension in the sling?
A) 2,250 lbs
B) 4,500 lbs
C) 9,000 lbs
D) 1,125 lbs
Rationale: In a single vertical lift, the tension equals the load weight.
There is no angle or multiple-leg sharing to affect the calculation.


2. What is the first step in any rigging operation?

,2


A) Select the appropriate sling
B) Determine the weight of the load
C) Inspect the crane
D) Clear the lift zone
Rationale: Determining the load weight is the essential first step
before selecting rigging equipment or planning the lift. All rigging
capacities depend on knowing the load weight.


3. What is the recommended action when lifting a load longer than
_______?
A) 8 feet
B) 10 feet
C) 12 feet
D) 15 feet
Rationale: The recommendation when lifting a load longer than 12
feet is to use two choker hitches to provide better load control and
stability.


4. A 1-inch, 3-leg bridle wire rope sling rigged at a 45-degree angle is
rated for 18 tons. If a fourth leg is added, the capacity will increase
by:
A) 4.5 tons
B) 6 tons
C) 0 lbs (no increase)
D) 2 tons

,3


Rationale: Adding a fourth leg to a bridle sling does not increase the
rated capacity. The capacity is determined by the angle of the legs
and the weakest leg.


5. According to OSHA regulations, a hook must be removed from
service when the throat opening exceeds what percentage of its
original opening?
A) 10%
B) 15%
C) 20%
D) 25%
Rationale: OSHA requires hook replacement if the throat opening
exceeds 15% of its original size. This deformation indicates
overloading or metal fatigue.


6. What provides additional control of a load being lifted?
A) Tag lines
B) Safety harnesses
C) Tag lines
D) Outriggers
Rationale: Tag lines are used to help control the load, preventing it
from swinging or rotating during the lift. They allow ground
personnel to maintain load stability.


7. When two cranes are lifting 100 tons and Crane A has 40% of the
load, how much weight will Crane B have on its hook?

, 4


A) 40,000 lbs
B) 80,000 lbs
C) 120,000 lbs
D) 160,000 lbs
Rationale: 100 tons = 200,000 lbs. Crane A has 40% (80,000 lbs), so
Crane B has 60% (120,000 lbs). The two cranes share the total load.


8. The process that attempts to identify hazards and devise plans to
overcome or eliminate them is called:
A) Risk assessment
B) Lift plan
C) Safety audit
D) Pre-lift inspection
Rationale: A lift plan is a methodical process that identifies potential
hazards and develops plans to overcome or eliminate them before the
lift begins.


9. What type of rope will stretch the furthest under a sustained load?
A) Nylon
B) Polyester
C) Polypropylene
D) #1 Manila
Rationale: #1 Manila natural fiber rope stretches the furthest under a
sustained load compared to synthetic alternatives.


10. How do you find the safe working load (SWL) for a single vertical
wire rope sling using the rule of thumb?

Document information

Uploaded on
August 21, 2026
Number of pages
50
Written in
2026/2027
Type
Exam (elaborations)
Contains
Questions & answers
$30.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Sold
68
Followers
13
Items
2940
Last sold
1 month ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions