CR7 CARPENTRY LATEST EXAM
2026/2027 WITH 260 QUESTIONS AND
EXPERT-VERIFIED CORRECT
ANSWERS | ALREADY GRADED A+ |
GUARANTEED PASS | CR7
CARPENTRY EXAM
In a structure designed for habitation, what is the minimum percentage of the floor
area the must outside ventilation by openable area? - CORRECT ANSWER-4%
If on a site plan you have a footing with a depth reading of 94, the benchmark has a
reading of 100 and the backside has a reading of 4.70, what will the rod be
reading? - CORRECT ANSWER-10.70
Holes bored in studs must be what minimum distance from the face of the stud? -
CORRECT ANSWER-5/8" (.625")
How many square feet in one acre? - CORRECT ANSWER-43,560
,With 5/8" plywood what is the maximum fasting center at the intermediate
supports? - CORRECT ANSWER-12"
What is the name for the architectural drawing that shows a building front, back
and/or sides? - CORRECT ANSWER-Elevation
If correctly fitted in the jamb, an interior door has what maximum space between
the top of the door and the jamb header? - CORRECT ANSWER-1/8"
What is the fastening requirement for a joist to sill or girder? - CORRECT
ANSWER-3 x 8d common
What is the maximum hole that can be bored in a 2X10 floor joist for plumbing? -
CORRECT ANSWER-3"
25 gauge metal wall studs 19 feet tall finished with Sheetrock must have what
depth? - CORRECT ANSWER-6"
If a carpenter frames a stairwell and the ceiling is at 78 inches, the ceiling is? -
CORRECT ANSWER-2" too low
To what depth can a load bearing steel stud be notched? - CORRECT ANSWER-
0%
If the floor area is 150 square feet what is the minimum ventilation area? -
CORRECT ANSWER-1.00 sqft
What is the rough opening required for an exterior door if considering the with? -
CORRECT ANSWER-+1"
, Within how many days should wood flooring be shipped to and stored in any
building before being installed? - CORRECT ANSWER-4-5 days
In a spiral stairs what is the maximum height of the riser? - CORRECT ANSWER-
9 1/2"
The distance between two supports is referred to as? - CORRECT ANSWER-Span
Gable vent screens are required to what maximum square opening? - CORRECT
ANSWER-1/4"
If you need to pace a batterboard at the project and the rod reading is 6.2 and the
batterboard has to be 2'6" higher than the reading, what is the reading at the
batterboard? - CORRECT ANSWER-8.8
What are the steps in a spiral staircase called? - CORRECT ANSWER-Winders
Interior doors frames are attached with? - CORRECT ANSWER-8d casing nails
If an attic measures 28' x 45' and the ceiling below has a perm of 2, what is the
required ratio of ventilation? - CORRECT ANSWER-1:300
When is a room considered square? - CORRECT ANSWER-When the diagonals
are equal in length
How much wood can be removed from a non-load bearing 2X4 stud for notching?
- CORRECT ANSWER-1.4"
2026/2027 WITH 260 QUESTIONS AND
EXPERT-VERIFIED CORRECT
ANSWERS | ALREADY GRADED A+ |
GUARANTEED PASS | CR7
CARPENTRY EXAM
In a structure designed for habitation, what is the minimum percentage of the floor
area the must outside ventilation by openable area? - CORRECT ANSWER-4%
If on a site plan you have a footing with a depth reading of 94, the benchmark has a
reading of 100 and the backside has a reading of 4.70, what will the rod be
reading? - CORRECT ANSWER-10.70
Holes bored in studs must be what minimum distance from the face of the stud? -
CORRECT ANSWER-5/8" (.625")
How many square feet in one acre? - CORRECT ANSWER-43,560
,With 5/8" plywood what is the maximum fasting center at the intermediate
supports? - CORRECT ANSWER-12"
What is the name for the architectural drawing that shows a building front, back
and/or sides? - CORRECT ANSWER-Elevation
If correctly fitted in the jamb, an interior door has what maximum space between
the top of the door and the jamb header? - CORRECT ANSWER-1/8"
What is the fastening requirement for a joist to sill or girder? - CORRECT
ANSWER-3 x 8d common
What is the maximum hole that can be bored in a 2X10 floor joist for plumbing? -
CORRECT ANSWER-3"
25 gauge metal wall studs 19 feet tall finished with Sheetrock must have what
depth? - CORRECT ANSWER-6"
If a carpenter frames a stairwell and the ceiling is at 78 inches, the ceiling is? -
CORRECT ANSWER-2" too low
To what depth can a load bearing steel stud be notched? - CORRECT ANSWER-
0%
If the floor area is 150 square feet what is the minimum ventilation area? -
CORRECT ANSWER-1.00 sqft
What is the rough opening required for an exterior door if considering the with? -
CORRECT ANSWER-+1"
, Within how many days should wood flooring be shipped to and stored in any
building before being installed? - CORRECT ANSWER-4-5 days
In a spiral stairs what is the maximum height of the riser? - CORRECT ANSWER-
9 1/2"
The distance between two supports is referred to as? - CORRECT ANSWER-Span
Gable vent screens are required to what maximum square opening? - CORRECT
ANSWER-1/4"
If you need to pace a batterboard at the project and the rod reading is 6.2 and the
batterboard has to be 2'6" higher than the reading, what is the reading at the
batterboard? - CORRECT ANSWER-8.8
What are the steps in a spiral staircase called? - CORRECT ANSWER-Winders
Interior doors frames are attached with? - CORRECT ANSWER-8d casing nails
If an attic measures 28' x 45' and the ceiling below has a perm of 2, what is the
required ratio of ventilation? - CORRECT ANSWER-1:300
When is a room considered square? - CORRECT ANSWER-When the diagonals
are equal in length
How much wood can be removed from a non-load bearing 2X4 stud for notching?
- CORRECT ANSWER-1.4"
