NAVEDTRA 14040, BLUEPRINT READING AND SKETCHING
Study online at https://quizlet.com/_9jl3da
1. What are copies of mechanical or other types of tech- Blueprints
nical drawings referred to as?
2. Which term means interpreting ideas expressed by Blueprint Reading
others on drawings whether or not the drawings are
actually blueprints?
3. Original drawings are drawn, or traced directly on (CAD) Computer aided
translucent racing paper or cloth, using black water- drafting
proof India ink, a pencil, or what other system?
4. Which type of patented paper produces prints with BW Paper
black lines on a white background?
5. Which process is used by businesses to incorporate Photo-static
reduced-size drawings into reports or records?
6. The standards and procedures prescribed for military (ANSI) American National
drawings and blueprints are stated in military stands Standards Institute
and which other standards?
7. Which military standard specifies the size, format, lo- MIL-STD-100A
cation and type of information that should be includ-
ed in military blueprints?
8. What is used by the draftsman to give the reader ad- Information blocks
ditional information about materials, specifications,
and so forth that are not shown in the blueprint or
that may need additional explanation?
9. Where is the title block located on all blueprints and Lower - Right corner
drawings prepared in accordance with MIL-STD's?
10. Upper- Right corner
, NAVEDTRA 14040, BLUEPRINT READING AND SKETCHING
Study online at https://quizlet.com/_9jl3da
Where will the revision block be on a blueprint if a
revision has been made?
11. Which number serve the same purpose as the num- Zone
bers and letters printed on borders of maps to help
you locate a particular point or part?
12. Which block in the title block of the blueprint shows Scale
the size of the drawing compared with the actual size
of the part?
13. Never measure a drawing; use what instead? Dimensions
14. What can station on an aircraft be described as? Rib
15. Which block contains a list of parts and/or materials Bill of Material
needed for the project?
16. Which block on a blueprint , identifies directly by or Application
reference to the larger unit that contains the part or
assembled on the drawing?
17. What provides a better surface appearance and a bet- Machining
ter fit with closely mated parts?
18. What are placed on drawings to give additional infor- Notes
mation to clarify the object on the blueprint?
19. What is a statement or document containing a de- Specification
scription as the terms of a contract or details of an
object or objects not shown on a blueprint or drawing?
20. Federal Specifications
, NAVEDTRA 14040, BLUEPRINT READING AND SKETCHING
Study online at https://quizlet.com/_9jl3da
What covers the characteristics of the material or sup-
plies used jointly by the Navy and other government
departments?
21. What explains or defines a symbol or special mark Legend
place on the blueprint?
22. What must you understand In order to read the blue- Lines
prints?
23. What are blueprints usually called? Plans?
24. Which type of plans are submitted with bids or other Preliminary
plans before a contract is awarded?
25. Which type of plans illustrate mandatory design fea- Contracts
tures of the ship?
26. Which type of plans illustrate design features of the Contract Guidelines
ship subject to development?
27. Which type of plans illustrate arrangement or details Standard
of equipment, systems, or parts where specific re-
quirements are mandatory?
28. What type of plan illustrates the general arrangement Type
of equipment, systems, or parts that do not require
strict compliance to detail as long as the work gets the
required result?
29. Which type of plans does the contractor use to con- Working
struct the ship?
30. Corrected
Study online at https://quizlet.com/_9jl3da
1. What are copies of mechanical or other types of tech- Blueprints
nical drawings referred to as?
2. Which term means interpreting ideas expressed by Blueprint Reading
others on drawings whether or not the drawings are
actually blueprints?
3. Original drawings are drawn, or traced directly on (CAD) Computer aided
translucent racing paper or cloth, using black water- drafting
proof India ink, a pencil, or what other system?
4. Which type of patented paper produces prints with BW Paper
black lines on a white background?
5. Which process is used by businesses to incorporate Photo-static
reduced-size drawings into reports or records?
6. The standards and procedures prescribed for military (ANSI) American National
drawings and blueprints are stated in military stands Standards Institute
and which other standards?
7. Which military standard specifies the size, format, lo- MIL-STD-100A
cation and type of information that should be includ-
ed in military blueprints?
8. What is used by the draftsman to give the reader ad- Information blocks
ditional information about materials, specifications,
and so forth that are not shown in the blueprint or
that may need additional explanation?
9. Where is the title block located on all blueprints and Lower - Right corner
drawings prepared in accordance with MIL-STD's?
10. Upper- Right corner
, NAVEDTRA 14040, BLUEPRINT READING AND SKETCHING
Study online at https://quizlet.com/_9jl3da
Where will the revision block be on a blueprint if a
revision has been made?
11. Which number serve the same purpose as the num- Zone
bers and letters printed on borders of maps to help
you locate a particular point or part?
12. Which block in the title block of the blueprint shows Scale
the size of the drawing compared with the actual size
of the part?
13. Never measure a drawing; use what instead? Dimensions
14. What can station on an aircraft be described as? Rib
15. Which block contains a list of parts and/or materials Bill of Material
needed for the project?
16. Which block on a blueprint , identifies directly by or Application
reference to the larger unit that contains the part or
assembled on the drawing?
17. What provides a better surface appearance and a bet- Machining
ter fit with closely mated parts?
18. What are placed on drawings to give additional infor- Notes
mation to clarify the object on the blueprint?
19. What is a statement or document containing a de- Specification
scription as the terms of a contract or details of an
object or objects not shown on a blueprint or drawing?
20. Federal Specifications
, NAVEDTRA 14040, BLUEPRINT READING AND SKETCHING
Study online at https://quizlet.com/_9jl3da
What covers the characteristics of the material or sup-
plies used jointly by the Navy and other government
departments?
21. What explains or defines a symbol or special mark Legend
place on the blueprint?
22. What must you understand In order to read the blue- Lines
prints?
23. What are blueprints usually called? Plans?
24. Which type of plans are submitted with bids or other Preliminary
plans before a contract is awarded?
25. Which type of plans illustrate mandatory design fea- Contracts
tures of the ship?
26. Which type of plans illustrate design features of the Contract Guidelines
ship subject to development?
27. Which type of plans illustrate arrangement or details Standard
of equipment, systems, or parts where specific re-
quirements are mandatory?
28. What type of plan illustrates the general arrangement Type
of equipment, systems, or parts that do not require
strict compliance to detail as long as the work gets the
required result?
29. Which type of plans does the contractor use to con- Working
struct the ship?
30. Corrected
