US Army Explosives Safety Familiarization (AMMO-63) Exam Questions and Answers
What are three uses of low explosives? Delay Elements
Propellants
Pyrotechnics
Low explosives commonly used to thrust a projectile Propellants
out of a weapon are called
Black powder is an example of a low explosive because Deflagrates
it
TNT is an example of a high explosive because it Detonates
What are three types of high explosives? RDX
PETN
Dynamite
What is not an example of a high explosive? Propane
What are two key concepts you need to know about They allow for safe storage and handling
explosive trains?
They ensure the items function as intended
Which component is not part of a low explosive train? Booster
Which component is not part of a low explosive train? Primer, Detonator, Booster, Bursting charge
Which three items will you find on a high explosive Booster
train? Detonator
Bursting charge
Which is not a characteristic of inert ammo? They have an explosive charge
What are three ways to determine if an ammo item is It is a cloth-covered component marked "INERT"
inert?
It is drilled with holes, and the word "EMPTY" is stamped on it
It is small arms ammunition on public display with "INERT" attached on a plate
What are two exceptions to the requirement to drilling Empty or inert ammo used in loading drills
holes into inert ammo?
Empty or inert ammo whose use would be reduced by the holes
Using the the Chemical Group Job Aid, which three PT
chemicals produce extreme heat and are difficult to TH
extinguish when burning? HC
, US Army Explosives Safety Familiarization (AMMO-63) Exam Questions and Answers
Using the Chemical Group Job Aid, select two types of Fire resistant gloves, coveralls, and safety face shields
PPE/Special Equipment for Chemical Group C
Water barrels available to submerge leaking WP ammunition
Which distance is intended to prevent propagation ILD
between two operating buildings containing
explosives?
Why are there divisions within Class 1? To identify the specific hazard posed
Magazine A contains HC/D 1.1. Magazine B contains 1.4
HC/D 1.4. Which HC/D requires the smallest safe
separation distance?
The maximum NEW this magazine is permitted to hold 4 pallets
is 12,500 lbs of HC/D 1.1. It currently contains 11,000 lbs.
Using the Yellow Book, how many pallets of the
ammunition listed below can be placed in the facility?
The RM process works to prevent what three hazards? Illness
Injury
Death
There are several potential hazards in the banding Determine how likely it would be to happen
operation. What two methods do you use to assess a
hazard that has been identified during the risk Determine how severe the outcome would be
management (RM) process?
SOPs are written with the cardinal rule in mind. It states Minimum number of people
that operations must expose:
Minimum amount of time
Minimum quantity of explosives
SOPs exist to: Protect
Inform
Guide you through your duties
What are three uses of low explosives? Delay Elements
Propellants
Pyrotechnics
Low explosives commonly used to thrust a projectile Propellants
out of a weapon are called
Black powder is an example of a low explosive because Deflagrates
it
TNT is an example of a high explosive because it Detonates
What are three types of high explosives? RDX
PETN
Dynamite
What is not an example of a high explosive? Propane
What are two key concepts you need to know about They allow for safe storage and handling
explosive trains?
They ensure the items function as intended
Which component is not part of a low explosive train? Booster
Which component is not part of a low explosive train? Primer, Detonator, Booster, Bursting charge
Which three items will you find on a high explosive Booster
train? Detonator
Bursting charge
Which is not a characteristic of inert ammo? They have an explosive charge
What are three ways to determine if an ammo item is It is a cloth-covered component marked "INERT"
inert?
It is drilled with holes, and the word "EMPTY" is stamped on it
It is small arms ammunition on public display with "INERT" attached on a plate
What are two exceptions to the requirement to drilling Empty or inert ammo used in loading drills
holes into inert ammo?
Empty or inert ammo whose use would be reduced by the holes
Using the the Chemical Group Job Aid, which three PT
chemicals produce extreme heat and are difficult to TH
extinguish when burning? HC
, US Army Explosives Safety Familiarization (AMMO-63) Exam Questions and Answers
Using the Chemical Group Job Aid, select two types of Fire resistant gloves, coveralls, and safety face shields
PPE/Special Equipment for Chemical Group C
Water barrels available to submerge leaking WP ammunition
Which distance is intended to prevent propagation ILD
between two operating buildings containing
explosives?
Why are there divisions within Class 1? To identify the specific hazard posed
Magazine A contains HC/D 1.1. Magazine B contains 1.4
HC/D 1.4. Which HC/D requires the smallest safe
separation distance?
The maximum NEW this magazine is permitted to hold 4 pallets
is 12,500 lbs of HC/D 1.1. It currently contains 11,000 lbs.
Using the Yellow Book, how many pallets of the
ammunition listed below can be placed in the facility?
The RM process works to prevent what three hazards? Illness
Injury
Death
There are several potential hazards in the banding Determine how likely it would be to happen
operation. What two methods do you use to assess a
hazard that has been identified during the risk Determine how severe the outcome would be
management (RM) process?
SOPs are written with the cardinal rule in mind. It states Minimum number of people
that operations must expose:
Minimum amount of time
Minimum quantity of explosives
SOPs exist to: Protect
Inform
Guide you through your duties
