8/20/26, 12:24 PM NACE CIP 1 CBT EXAM ACTUAL EXAM 2026 | ALL QUESTIONS AND CORRECT ANSWERS | VERIFIED ANSWERS | BRAND …
NACE CIP 1 CBT EXAM ACTUAL EXAM 2026 | ALL
QUESTIONS AND CORRECT ANSWERS |
VERIFIED ANSWERS | BRAND NEW VERSION
Terms in this set (97)
What is the first preferred course of Document the problem and advise the Contractor
action if small blisters are noticed in and Owner's representative.
a tank lining?
What is dew point? The temperature at which condensation occurs.
What should a coating inspector A blotter test for the presence of oil and water.
perform if a poorly maintained
compressor is used?
https://quizlet.com/1200619248/nace-cip-1-cbt-exam-actual-exam-2026-all-questions-and-correct-answers-verified-answers-brand-new-version-flash-… 1/11
, 8/20/26, 12:24 PM NACE CIP 1 CBT EXAM ACTUAL EXAM 2026 | ALL QUESTIONS AND CORRECT ANSWERS | VERIFIED ANSWERS | BRAND …
What should an inspector do upon Observe and document the amount of material and
arrival of coating materials? batch numbers.
What is relative humidity? A measure of the amount of moisture in the air
compared to saturation level.
Galvanic corrosion occurs on which Metal.
substrate?
Which specification is most likely SSPC-CS 23.00/AWS C2.23/NACE No. 12.
referenced when applying Thermal
Spray Coatings?
What is the minimum recommended 2.5 cm (1 inch).
distance for taking a DFT gauge
measurement from an edge?
What is polymerization? The process of monomers joining together.
What is an exposed area of the Holiday.
substrate or previous coat of a
conductive coating material called?
What is checking in coatings? A fine crack in the surface of a coating that rarely
reaches the substrate.
Why is inspection documentation Owners use the documentation for a variety of
important? purposes.
https://quizlet.com/1200619248/nace-cip-1-cbt-exam-actual-exam-2026-all-questions-and-correct-answers-verified-answers-brand-new-version-flash-… 2/11
NACE CIP 1 CBT EXAM ACTUAL EXAM 2026 | ALL
QUESTIONS AND CORRECT ANSWERS |
VERIFIED ANSWERS | BRAND NEW VERSION
Terms in this set (97)
What is the first preferred course of Document the problem and advise the Contractor
action if small blisters are noticed in and Owner's representative.
a tank lining?
What is dew point? The temperature at which condensation occurs.
What should a coating inspector A blotter test for the presence of oil and water.
perform if a poorly maintained
compressor is used?
https://quizlet.com/1200619248/nace-cip-1-cbt-exam-actual-exam-2026-all-questions-and-correct-answers-verified-answers-brand-new-version-flash-… 1/11
, 8/20/26, 12:24 PM NACE CIP 1 CBT EXAM ACTUAL EXAM 2026 | ALL QUESTIONS AND CORRECT ANSWERS | VERIFIED ANSWERS | BRAND …
What should an inspector do upon Observe and document the amount of material and
arrival of coating materials? batch numbers.
What is relative humidity? A measure of the amount of moisture in the air
compared to saturation level.
Galvanic corrosion occurs on which Metal.
substrate?
Which specification is most likely SSPC-CS 23.00/AWS C2.23/NACE No. 12.
referenced when applying Thermal
Spray Coatings?
What is the minimum recommended 2.5 cm (1 inch).
distance for taking a DFT gauge
measurement from an edge?
What is polymerization? The process of monomers joining together.
What is an exposed area of the Holiday.
substrate or previous coat of a
conductive coating material called?
What is checking in coatings? A fine crack in the surface of a coating that rarely
reaches the substrate.
Why is inspection documentation Owners use the documentation for a variety of
important? purposes.
https://quizlet.com/1200619248/nace-cip-1-cbt-exam-actual-exam-2026-all-questions-and-correct-answers-verified-answers-brand-new-version-flash-… 2/11
