U1 UST INSTALLATION
RETROFITTING FINAL PAPER
QUESTIONS WITH ANSWERS
GRADED A PLUS
◉ 2. Written Plans are required to. Answer: obtain permits, solicit bids,
and provide precise guidance for installers.
◉ 3. The plans should. Answer: Describe the property, identify the size
and location of the tanks, indicate the liquids to be stored and provide
the location of the dispensers and piping.
◉ 4. Storage systems discussed in this recommended practice are
usually regulated by. Answer: Federal state or local agencies.
◉ 5. All owners should ensure that the equipment to be installed meets.
Answer: applicable regulatory requirements before being installed
◉ 6. Consult the local authorities who have jurisdiction in the area
before storage-system plans are. Answer: finalized or construction is
initiated.
, ◉ 7. All owners should ensure that the equipment to be installed meets
all applicable regulatory requirements before. Answer: Being installed.
◉ 8. To avoid damage tanks must not be. Answer: dropped, dragged, or
handled with sharp objects and.
◉ 9. Tanks must not be dropped, dragged, or handled with sharp objects
to avoid .. Answer: Damage to the tank
◉ 10. The only time tanks really should be moved is when. Answer: for
inspections and testing.
◉ 11. If a tanks is damaged at all throughout the moving process it must
be. Answer: Repaired in accordance with the manufactures instructions.
◉ 12. The proper way to move a tank is by lifting it, using the. Answer:
Lift lugs that are installed by the manufacturer.
◉ 13. Tanks should be carefully lifted and lowered using. Answer:
Cables or chains of adequate length.
◉ 14. When two lifting lugs are bing used, the angle between the lifting
cable and vertical should be no more than. Answer: 30 degrees.
RETROFITTING FINAL PAPER
QUESTIONS WITH ANSWERS
GRADED A PLUS
◉ 2. Written Plans are required to. Answer: obtain permits, solicit bids,
and provide precise guidance for installers.
◉ 3. The plans should. Answer: Describe the property, identify the size
and location of the tanks, indicate the liquids to be stored and provide
the location of the dispensers and piping.
◉ 4. Storage systems discussed in this recommended practice are
usually regulated by. Answer: Federal state or local agencies.
◉ 5. All owners should ensure that the equipment to be installed meets.
Answer: applicable regulatory requirements before being installed
◉ 6. Consult the local authorities who have jurisdiction in the area
before storage-system plans are. Answer: finalized or construction is
initiated.
, ◉ 7. All owners should ensure that the equipment to be installed meets
all applicable regulatory requirements before. Answer: Being installed.
◉ 8. To avoid damage tanks must not be. Answer: dropped, dragged, or
handled with sharp objects and.
◉ 9. Tanks must not be dropped, dragged, or handled with sharp objects
to avoid .. Answer: Damage to the tank
◉ 10. The only time tanks really should be moved is when. Answer: for
inspections and testing.
◉ 11. If a tanks is damaged at all throughout the moving process it must
be. Answer: Repaired in accordance with the manufactures instructions.
◉ 12. The proper way to move a tank is by lifting it, using the. Answer:
Lift lugs that are installed by the manufacturer.
◉ 13. Tanks should be carefully lifted and lowered using. Answer:
Cables or chains of adequate length.
◉ 14. When two lifting lugs are bing used, the angle between the lifting
cable and vertical should be no more than. Answer: 30 degrees.
