Turner Ind Test Exam Questions &
Answers (Grade A+)
Convection -
correct answer ✅is the transfer of heat through space by heat ray.
expanded tube joint -
correct answer ✅is the tube-to-tube sheetjoint achieved by
mechanical of explosive expansion of the tube into the tube hole in
the tube sheat.
conduction -
correct answer ✅is the transfer of heat within a fluid material by
actual movement of hotter molecules from one place to another.
double tube sheet -
correct answer ✅is a type of construction in which two (2) spaced
tube sheets, or equivalent, are employed in lieu of the single tube
sheet at one or both ends of the heat exchanger.
tube sheet ligament -
correct answer ✅is the shortest distance between adjacent tube
holes in the tube pattern
, Turner Ind Test Exam Questions &
Answers (Grade A+)
water -
correct answer ✅is usually used when a heat exchanger is test
cross bolt -
correct answer ✅When flanging up heads, attention should be
given to ------------- tightening to ensure even draw-up on the flange.
outside diameter -
correct answer ✅Tube OD refers to the measured ---------- of a
tube
downcomer -
correct answer ✅is a part of the tray that is the vertical position
which connects the tray to another, or the tower shell.
draw off -
correct answer ✅is a trough or depressed section of a tray which
collects the liquid
Straight Tube Heat Exchanger -
correct answer ✅
Answers (Grade A+)
Convection -
correct answer ✅is the transfer of heat through space by heat ray.
expanded tube joint -
correct answer ✅is the tube-to-tube sheetjoint achieved by
mechanical of explosive expansion of the tube into the tube hole in
the tube sheat.
conduction -
correct answer ✅is the transfer of heat within a fluid material by
actual movement of hotter molecules from one place to another.
double tube sheet -
correct answer ✅is a type of construction in which two (2) spaced
tube sheets, or equivalent, are employed in lieu of the single tube
sheet at one or both ends of the heat exchanger.
tube sheet ligament -
correct answer ✅is the shortest distance between adjacent tube
holes in the tube pattern
, Turner Ind Test Exam Questions &
Answers (Grade A+)
water -
correct answer ✅is usually used when a heat exchanger is test
cross bolt -
correct answer ✅When flanging up heads, attention should be
given to ------------- tightening to ensure even draw-up on the flange.
outside diameter -
correct answer ✅Tube OD refers to the measured ---------- of a
tube
downcomer -
correct answer ✅is a part of the tray that is the vertical position
which connects the tray to another, or the tower shell.
draw off -
correct answer ✅is a trough or depressed section of a tray which
collects the liquid
Straight Tube Heat Exchanger -
correct answer ✅
