FINE-C refers to an engine pre-start routine. It stands for
FINE-C Fuel, Ignition, Neutral, Engine cut-ott switch, Choke and
Clutch.
F Fuel, means if equipped, turn the fuel supply valve On.
Ignition, means turn the ignition switch to the On position.
I
Some indicator lights should come on.
Neutral, means to be in Neutral. The green light in the
instrument cluster "indicates" neutral. When in neutral,
N
the motorcycle will roll forward and backward with the
clutch lever and front brake lever released.
Engine cut-ott switch means put the switch in the Run/On
E
position.
Choke and Clutch, means to set the choke and squeeze in
C the clutch lever. The choke should be On for a cold engine,
although some motorcycles do not have a choke.
When starting the engine: Apply at least one of the
brakes.
Squeeze in the clutch lever fully.
Press the starter button.
Do not use the throttle if the choke is On as this could
Engine start procedure
provide too much fuel to the engine.
Once the engine is started, you can release the clutch lever,
but do so slowly in case the motorcycle is not in neutral.
Some engines will not start if the side stand is down. Many
motorcycles will allow the engine to start but will stall when
, MSF Basic eCourse: About Basic Operation Complete Study Review
the motorcycle is shifted into gear when the side stand is
down.
To stop the engine:
First, move the engine cut-ott switch to Ott with your right
thumb. Do this every time so you can develop the habit in
case you need to shut ott the engine in an emergency.
Engine stop procedure
Turn the ignition switch to Ott.
Turn the fuel supply valve Ott if it has that position.
It may help to remember the Engine Stop Procedure as
Thumb, Key, Valve.
Proper use of the clutch lever and friction zone is critical
for starting out smoothly and slow speed maneuvers.
The friction zone is a small area in the travel of the clutch
lever that controls the connection between the engine and
the rear wheel. Fully squeezing in the clutch lever removes
power from the rear wheel.
Clutch Lever & Friction Zone
The video shown here illustrates how clutch-lever use con-
nects power to the rear wheel. Notice squeezing the clutch
lever removes power from the rear wheel.
If you lose control of the motorcycle and want to stop, you
should squeeze in the clutch lever fully and use the brakes
as needed.
Riding Posture