Maryland Construction Health and
Safety Technician Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. A construction safety technician is assigned to a large commercial
building project where multiple subcontractors are performing work at
different elevations. Which responsibility best represents the primary
role of a Construction Health and Safety Technician (CHST) in this
environment?
A. Designing structural engineering blueprints for scaffolding systems
B. Performing safety, health, and environmental oversight across
multiple active construction activities
C. Managing payroll and labor distribution for subcontractors on site
D. Conducting architectural compliance reviews for building code
approval
B
A CHST primarily focuses on implementing and overseeing safety,
health, and environmental practices on construction sites rather than
engineering design, payroll administration, or architectural
approvals, ensuring hazard control and regulatory compliance across
active operations.
,2. A CHST candidate must typically demonstrate which minimum field
experience requirement before sitting for the certification exam?
A. One year of general construction labor experience
B. Two years of environmental engineering experience
C. Three years of construction safety experience with significant safety-
related duties
D. Five years of OSHA inspection authority experience
C
Eligibility standards for the CHST generally require several years of
construction safety experience, commonly three years, with a
substantial portion of duties focused on safety, health, and
environmental responsibilities in construction settings.
3. Which of the following best describes a core function of a Construction
Health and Safety Technician during daily site operations?
A. Conducting employee performance appraisals unrelated to safety
B. Identifying hazards and implementing controls to reduce workplace
risk
C. Approving project financing and procurement budgets
D. Scheduling architectural design revisions for client approval
B
A CHST is responsible for recognizing workplace hazards such as falls
or electrical risks and applying appropriate controls, ensuring safe
working conditions rather than managing financial or design-related
tasks.
4. A CHST is reviewing a construction site where workers are exposed to
fall hazards from scaffolding. Which action aligns most closely with
CHST responsibilities?
A. Replacing the structural beams supporting the scaffolding
B. Selecting and enforcing appropriate fall protection systems and
, procedures
C. Issuing legal construction permits to subcontractors
D. Designing new scaffolding engineering specifications
B
CHST responsibilities include applying safety standards such as fall
protection systems and ensuring compliance with hazard control
measures rather than performing engineering design or regulatory
permitting functions.
5. Which regulatory framework is most commonly associated with
construction safety compliance in CHST practice in the United States?
A. 29 CFR 1926 construction safety standards
B. International Electrical Code for residential wiring only
C. Federal Aviation Administration aircraft operation standards
D. United Nations maritime shipping regulations
A
Construction safety technicians frequently apply OSHA’s 29 CFR 1926
standards, which govern construction site safety requirements
including excavation, scaffolding, and fall protection.
6. A CHST observes improper trenching practices on a jobsite. What is the
most appropriate initial response?
A. Ignore the issue until an accident occurs
B. Immediately report and help correct the hazard using established
safety procedures
C. Terminate all construction work permanently
D. Wait for subcontractors to self-correct without intervention
B
A CHST is expected to actively intervene by reporting and correcting
hazards through established safety protocols to prevent injuries and
ensure regulatory compliance.
, 7. Which activity best reflects the “hazard identification” component of a
CHST’s role?
A. Inspecting work areas for unsafe conditions such as exposed
electrical wiring
B. Approving final architectural building drawings
C. Hiring administrative staff for site management
D. Managing project investor relations
A
Hazard identification involves actively inspecting work environments
to detect unsafe conditions that could cause harm to workers, which
is a key CHST responsibility.
8. A construction company assigns a CHST to lead a safety training
session. Which topic is most relevant?
A. Stock market investment strategies for contractors
B. Proper use of personal protective equipment (PPE) on construction
sites
C. Commercial property leasing agreements
D. Architectural design drafting techniques
B
CHSTs often conduct or support safety training such as PPE usage to
ensure workers understand how to protect themselves from jobsite
hazards.
9. Which principle best guides decision-making when selecting controls
for a construction hazard?
A. Random selection of any available equipment
B. Hierarchy of controls prioritizing elimination over PPE
C. Preference for cost-saving over safety effectiveness
D. Worker preference without technical assessment
B
Safety Technician Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. A construction safety technician is assigned to a large commercial
building project where multiple subcontractors are performing work at
different elevations. Which responsibility best represents the primary
role of a Construction Health and Safety Technician (CHST) in this
environment?
A. Designing structural engineering blueprints for scaffolding systems
B. Performing safety, health, and environmental oversight across
multiple active construction activities
C. Managing payroll and labor distribution for subcontractors on site
D. Conducting architectural compliance reviews for building code
approval
B
A CHST primarily focuses on implementing and overseeing safety,
health, and environmental practices on construction sites rather than
engineering design, payroll administration, or architectural
approvals, ensuring hazard control and regulatory compliance across
active operations.
,2. A CHST candidate must typically demonstrate which minimum field
experience requirement before sitting for the certification exam?
A. One year of general construction labor experience
B. Two years of environmental engineering experience
C. Three years of construction safety experience with significant safety-
related duties
D. Five years of OSHA inspection authority experience
C
Eligibility standards for the CHST generally require several years of
construction safety experience, commonly three years, with a
substantial portion of duties focused on safety, health, and
environmental responsibilities in construction settings.
3. Which of the following best describes a core function of a Construction
Health and Safety Technician during daily site operations?
A. Conducting employee performance appraisals unrelated to safety
B. Identifying hazards and implementing controls to reduce workplace
risk
C. Approving project financing and procurement budgets
D. Scheduling architectural design revisions for client approval
B
A CHST is responsible for recognizing workplace hazards such as falls
or electrical risks and applying appropriate controls, ensuring safe
working conditions rather than managing financial or design-related
tasks.
4. A CHST is reviewing a construction site where workers are exposed to
fall hazards from scaffolding. Which action aligns most closely with
CHST responsibilities?
A. Replacing the structural beams supporting the scaffolding
B. Selecting and enforcing appropriate fall protection systems and
, procedures
C. Issuing legal construction permits to subcontractors
D. Designing new scaffolding engineering specifications
B
CHST responsibilities include applying safety standards such as fall
protection systems and ensuring compliance with hazard control
measures rather than performing engineering design or regulatory
permitting functions.
5. Which regulatory framework is most commonly associated with
construction safety compliance in CHST practice in the United States?
A. 29 CFR 1926 construction safety standards
B. International Electrical Code for residential wiring only
C. Federal Aviation Administration aircraft operation standards
D. United Nations maritime shipping regulations
A
Construction safety technicians frequently apply OSHA’s 29 CFR 1926
standards, which govern construction site safety requirements
including excavation, scaffolding, and fall protection.
6. A CHST observes improper trenching practices on a jobsite. What is the
most appropriate initial response?
A. Ignore the issue until an accident occurs
B. Immediately report and help correct the hazard using established
safety procedures
C. Terminate all construction work permanently
D. Wait for subcontractors to self-correct without intervention
B
A CHST is expected to actively intervene by reporting and correcting
hazards through established safety protocols to prevent injuries and
ensure regulatory compliance.
, 7. Which activity best reflects the “hazard identification” component of a
CHST’s role?
A. Inspecting work areas for unsafe conditions such as exposed
electrical wiring
B. Approving final architectural building drawings
C. Hiring administrative staff for site management
D. Managing project investor relations
A
Hazard identification involves actively inspecting work environments
to detect unsafe conditions that could cause harm to workers, which
is a key CHST responsibility.
8. A construction company assigns a CHST to lead a safety training
session. Which topic is most relevant?
A. Stock market investment strategies for contractors
B. Proper use of personal protective equipment (PPE) on construction
sites
C. Commercial property leasing agreements
D. Architectural design drafting techniques
B
CHSTs often conduct or support safety training such as PPE usage to
ensure workers understand how to protect themselves from jobsite
hazards.
9. Which principle best guides decision-making when selecting controls
for a construction hazard?
A. Random selection of any available equipment
B. Hierarchy of controls prioritizing elimination over PPE
C. Preference for cost-saving over safety effectiveness
D. Worker preference without technical assessment
B
