NY TOW TRUCK ENDORSEMENT | ACTUAL EXAM
QUESTIONS AND VERIFIED ANSWERS | GRADED A+ |
PASS ON FIRST ATTEMPT | BRAND NEW 2026/2027
UPDATE
TABLE OF CONTENTS
Section Topic Area Questions
1 Definitions & Terminology 1-20
2 Vehicle Classifications & Weight Ratings (GVWR/GCWR) 21-35
3 License Requirements & Endorsements 36-45
4 Pre-Trip & Post-Trip Inspections 46-60
5 Safety Equipment & Securement Devices 61-75
6 Towing Procedures & Recovery Operations 76-95
7 Lighting & Signaling Requirements 96-105
8 Hazardous Operations & Emergency Procedures 106-115
9 Legal Requirements & NYS Vehicle & Traffic Law 116-130
,Section Topic Area Questions
10 Operator Responsibilities & Professional Conduct 131-145
11 Mixed/Comprehensive Scenarios 146-150
SECTION 1: DEFINITIONS & TERMINOLOGY
• 1. What is the correct definition of an "Air Dam" on a tow truck?
• A. A structural support beam located above the cab
• B. A flexible air-deflecting panel usually located below the radiator support
• C. A braking system component that attaches to the disabled vehicle
• D. A protective cover for the winch cable drum
.. CorreCt Answer: B — An air dam is a flexible air-deflecting panel typically mounted
below the radiator support to improve aerodynamics and protect undercarriage components.
• 2. What does "Approach Angle" refer to in tow truck operations?
• A. The angle at which the tow truck approaches a disabled vehicle
• B. The angle between the plane of the carrier bed or platform and the ground
• C. The maximum angle a tow truck can safely climb
• D. The angle of the steering wheel during towing operations
.. CorreCt Answer: B — Approach angle is defined as the angle between the plane of the
carrier bed or platform and the ground.
• 3. What is an "Auxiliary Braking Device"?
• A. A secondary brake system installed on the tow truck only
, • B. A device which attaches to the disabled vehicle to assist the tow truck's brakes in
retarding or stopping both vehicles
• C. An emergency brake that activates automatically during a collision
• D. A braking system that uses only the tow truck's rear wheels
.. CorreCt Answer: B — An auxiliary braking device attaches to the disabled vehicle to
assist the tow truck's brakes in retarding or stopping both vehicles.
• 4. What is the definition of "Auxiliary Equipment" on a tow truck?
• A. Equipment required by law for all towing operations
• B. Equipment that is not necessary to perform the basic function of the primary
equipment
• C. Safety equipment that must be inspected daily
• D. Equipment used exclusively for heavy-duty towing
.. CorreCt Answer: B — Auxiliary equipment is defined as equipment that is not necessary
to perform the basic function of the primary equipment.
• 5. "Auxiliary Tow Lights" are also commonly known as:
• A. Rear lights
• B. Tail lights
• C. Drag lights
• D. Headlights
.. CorreCt Answer: C — Auxiliary tow lights are also known as drag lights. They are stop,
tail, and turn signal lights attached to the trailing end of the towed vehicle.
• 6. What is an "Auxiliary Winch"?
• A. A winch mounted on the front of the tow truck
• B. A winch whose cable goes directly to the load, and not over the end of the boom
, • C. A winch used exclusively for recovering vehicles from ditches
• D. A winch that operates only in reverse
.. CorreCt Answer: B — An auxiliary winch (also called a drag winch) has a cable that goes
directly to the load, not over the end of the boom.
• 7. What is a "Boom" on a tow truck?
• A. The hydraulic lifting mechanism under the bed
• B. A structural member, extending from a mast, that supports the load and is used to
hold, extend, or lift a load free of the ground
• C. The towing chain attachment point
• D. The rear stabilizer jack
.. CorreCt Answer: B — A boom is a structural member extending from a mast that
supports the load and is used to hold, extend, or lift a load clear of the tow truck body.
• 8. What is the "Breaking Strength Rating" of equipment?
• A. The weight a worn piece of equipment can safely bear
• B. The maximum weight or load, as established by the manufacturer, that new, unused
equipment can bear under ideal laboratory conditions without being damaged
• C. The minimum weight required to activate safety devices
• D. The weight at which equipment will automatically fail
.. CorreCt Answer: B — Breaking strength rating is the maximum load that new, unused
equipment can bear under ideal laboratory conditions without damage.
• 9. What is a "Bridle" used for in towing operations?
• A. Securing the tow truck to a stationary object
• B. A V or Y type coupling device used to attach and center a cable in recovery, loading,
and unloading operations
QUESTIONS AND VERIFIED ANSWERS | GRADED A+ |
PASS ON FIRST ATTEMPT | BRAND NEW 2026/2027
UPDATE
TABLE OF CONTENTS
Section Topic Area Questions
1 Definitions & Terminology 1-20
2 Vehicle Classifications & Weight Ratings (GVWR/GCWR) 21-35
3 License Requirements & Endorsements 36-45
4 Pre-Trip & Post-Trip Inspections 46-60
5 Safety Equipment & Securement Devices 61-75
6 Towing Procedures & Recovery Operations 76-95
7 Lighting & Signaling Requirements 96-105
8 Hazardous Operations & Emergency Procedures 106-115
9 Legal Requirements & NYS Vehicle & Traffic Law 116-130
,Section Topic Area Questions
10 Operator Responsibilities & Professional Conduct 131-145
11 Mixed/Comprehensive Scenarios 146-150
SECTION 1: DEFINITIONS & TERMINOLOGY
• 1. What is the correct definition of an "Air Dam" on a tow truck?
• A. A structural support beam located above the cab
• B. A flexible air-deflecting panel usually located below the radiator support
• C. A braking system component that attaches to the disabled vehicle
• D. A protective cover for the winch cable drum
.. CorreCt Answer: B — An air dam is a flexible air-deflecting panel typically mounted
below the radiator support to improve aerodynamics and protect undercarriage components.
• 2. What does "Approach Angle" refer to in tow truck operations?
• A. The angle at which the tow truck approaches a disabled vehicle
• B. The angle between the plane of the carrier bed or platform and the ground
• C. The maximum angle a tow truck can safely climb
• D. The angle of the steering wheel during towing operations
.. CorreCt Answer: B — Approach angle is defined as the angle between the plane of the
carrier bed or platform and the ground.
• 3. What is an "Auxiliary Braking Device"?
• A. A secondary brake system installed on the tow truck only
, • B. A device which attaches to the disabled vehicle to assist the tow truck's brakes in
retarding or stopping both vehicles
• C. An emergency brake that activates automatically during a collision
• D. A braking system that uses only the tow truck's rear wheels
.. CorreCt Answer: B — An auxiliary braking device attaches to the disabled vehicle to
assist the tow truck's brakes in retarding or stopping both vehicles.
• 4. What is the definition of "Auxiliary Equipment" on a tow truck?
• A. Equipment required by law for all towing operations
• B. Equipment that is not necessary to perform the basic function of the primary
equipment
• C. Safety equipment that must be inspected daily
• D. Equipment used exclusively for heavy-duty towing
.. CorreCt Answer: B — Auxiliary equipment is defined as equipment that is not necessary
to perform the basic function of the primary equipment.
• 5. "Auxiliary Tow Lights" are also commonly known as:
• A. Rear lights
• B. Tail lights
• C. Drag lights
• D. Headlights
.. CorreCt Answer: C — Auxiliary tow lights are also known as drag lights. They are stop,
tail, and turn signal lights attached to the trailing end of the towed vehicle.
• 6. What is an "Auxiliary Winch"?
• A. A winch mounted on the front of the tow truck
• B. A winch whose cable goes directly to the load, and not over the end of the boom
, • C. A winch used exclusively for recovering vehicles from ditches
• D. A winch that operates only in reverse
.. CorreCt Answer: B — An auxiliary winch (also called a drag winch) has a cable that goes
directly to the load, not over the end of the boom.
• 7. What is a "Boom" on a tow truck?
• A. The hydraulic lifting mechanism under the bed
• B. A structural member, extending from a mast, that supports the load and is used to
hold, extend, or lift a load free of the ground
• C. The towing chain attachment point
• D. The rear stabilizer jack
.. CorreCt Answer: B — A boom is a structural member extending from a mast that
supports the load and is used to hold, extend, or lift a load clear of the tow truck body.
• 8. What is the "Breaking Strength Rating" of equipment?
• A. The weight a worn piece of equipment can safely bear
• B. The maximum weight or load, as established by the manufacturer, that new, unused
equipment can bear under ideal laboratory conditions without being damaged
• C. The minimum weight required to activate safety devices
• D. The weight at which equipment will automatically fail
.. CorreCt Answer: B — Breaking strength rating is the maximum load that new, unused
equipment can bear under ideal laboratory conditions without damage.
• 9. What is a "Bridle" used for in towing operations?
• A. Securing the tow truck to a stationary object
• B. A V or Y type coupling device used to attach and center a cable in recovery, loading,
and unloading operations
