BBS 200 AVANCED BALLISTICS SDI | Questions with 100% Verified
Answers | Latest Update 2026/2027
Question: After a bullet leaves the rifle barrel, what two forces act on
the bullet's trajectory
Answer:
gravity and the force due to the air
Question: Which reloading scale is accurate, inexpensive, and not
affected by changes in atmospheric pressure?
a. An electronic scale
b. A beam scale
c. A kitchen scale
d. A spring scale
Answer:
A beam scale
Question: The sizing die is ________ and needs to be fitted into an
appropriate reloading press.
a. Temperature-sensitive
b. Cartridge-specific
c. Crimped
d. Thermocoupled
Answer:
Cartridge-specific
Question: Full-length sizing die setup begins by inserting the ______ into
the top of the press's ram.
a. Trim die
b. Decapping pin
c. Case lube
d. Shellholder
Answer:
Shellholder
, Question: The measurement for overall case length is taken from the flat
of the case head to the opening of the case mouth, and the
length is always expressed as a maximum dimension less
_____________.
a. Ten-thousandths of an inch
b. One-tenth of an inch
c. One one-thousandths of an inch
d. Ten-thousandths of a milliliter
Answer:
Ten-thousandths of an inch
Question: Which process compresses metal and reforms it to a specified
dimension?
a. Soft-seating
b. Cam-over
c. Decapping
d. Resizing
Answer:
Resizing
Question: What is the proper name for a bullet tip
a. The meplat
b. The cam
c. The head
d. The point
Answer:
The meplat
Question: What is the name for backing off the ram slightly and screwing
in the die an additional 1/8- to ¼-turn?
a. Soft-seating
b. Cam-over
c. Decapping
d. Crimping
Answer:
Cam-over
Question: True or False
The cleaning of the primer pocket cannot be done until the
primer is removed.
Answer:
TRUE
Answers | Latest Update 2026/2027
Question: After a bullet leaves the rifle barrel, what two forces act on
the bullet's trajectory
Answer:
gravity and the force due to the air
Question: Which reloading scale is accurate, inexpensive, and not
affected by changes in atmospheric pressure?
a. An electronic scale
b. A beam scale
c. A kitchen scale
d. A spring scale
Answer:
A beam scale
Question: The sizing die is ________ and needs to be fitted into an
appropriate reloading press.
a. Temperature-sensitive
b. Cartridge-specific
c. Crimped
d. Thermocoupled
Answer:
Cartridge-specific
Question: Full-length sizing die setup begins by inserting the ______ into
the top of the press's ram.
a. Trim die
b. Decapping pin
c. Case lube
d. Shellholder
Answer:
Shellholder
, Question: The measurement for overall case length is taken from the flat
of the case head to the opening of the case mouth, and the
length is always expressed as a maximum dimension less
_____________.
a. Ten-thousandths of an inch
b. One-tenth of an inch
c. One one-thousandths of an inch
d. Ten-thousandths of a milliliter
Answer:
Ten-thousandths of an inch
Question: Which process compresses metal and reforms it to a specified
dimension?
a. Soft-seating
b. Cam-over
c. Decapping
d. Resizing
Answer:
Resizing
Question: What is the proper name for a bullet tip
a. The meplat
b. The cam
c. The head
d. The point
Answer:
The meplat
Question: What is the name for backing off the ram slightly and screwing
in the die an additional 1/8- to ¼-turn?
a. Soft-seating
b. Cam-over
c. Decapping
d. Crimping
Answer:
Cam-over
Question: True or False
The cleaning of the primer pocket cannot be done until the
primer is removed.
Answer:
TRUE
