1|Page
AAI CFI Study Guide |Complete
Questions And Answers 2026
The chemical and physical changes that occur in gypsum wallboard surfaces
during a fire - correct-answer - Calcination
A narcotic gas that one might be exposed to in the fire - correct-answer - Carbon
Monoxide
The levels of this toxin dissipate over time after removal from the fire
environment. - correct-answer - Carbon Monoxide
,2|Page
This toxic condition does NOT cause a cherry-pink coloration to the skin of the fire
victim and is NOT visible on all skin types - correct-answer - Carbon Monoxide
Poisoning
This occurrence is the most common open-flame ignition source in non-fuel
injected vehicles - correct-answer - Carburetor Backfire
When the fire plume reaches the ceiling of a room and moves laterally along the
ceiling - correct-answer - Ceiling jet
An item in the home that burns at a peak HRR of 3000-5000kW, which is hotter
than a pool of gasoline or a polyurethane chair - correct-answer - Christmas Tree
This occurs when intense radiated heat or direct flame contacts a surface during
the fire, burning away deposits - correct-answer - Clean Burn
,3|Page
This is a fire effect to furniture that does NOT provide the investigators with clues
concerning the type of ignition source, but can show fire spread and intensity -
correct-answer - Collapsed Furniture Springs
A fire characteristic that is NOT necessarily an accurate indicator of the flame
temperature - correct-answer - Color
This feature distinguishes the heat-sensitive bulbs of sprinkler heads from each
other - correct-answer - Color Codes
A chemical process of oxidation, which occurs at a rate fast enough to produce
heat and usually light in the form of either a glow or a flame - correct-answer -
Combustion
, 4|Page
A building design feature that aims to limit the fire to its origin. - correct-answer -
Compartmentation
Located at the origin, these should be considered individually during the
development of a cause hypothesis - correct-answer - Competent Ignition Source
This should be donned when dealing with hazardous chemicals - correct-answer -
Complete PPE
An example of heat transfer, when the heating of a steel beam to an unexposed
part of a building results in a fire in that location - correct-answer - Conduction
Overheating on a circuit is most likely to occur at this location on a circuit -
correct-answer - Connection Points
AAI CFI Study Guide |Complete
Questions And Answers 2026
The chemical and physical changes that occur in gypsum wallboard surfaces
during a fire - correct-answer - Calcination
A narcotic gas that one might be exposed to in the fire - correct-answer - Carbon
Monoxide
The levels of this toxin dissipate over time after removal from the fire
environment. - correct-answer - Carbon Monoxide
,2|Page
This toxic condition does NOT cause a cherry-pink coloration to the skin of the fire
victim and is NOT visible on all skin types - correct-answer - Carbon Monoxide
Poisoning
This occurrence is the most common open-flame ignition source in non-fuel
injected vehicles - correct-answer - Carburetor Backfire
When the fire plume reaches the ceiling of a room and moves laterally along the
ceiling - correct-answer - Ceiling jet
An item in the home that burns at a peak HRR of 3000-5000kW, which is hotter
than a pool of gasoline or a polyurethane chair - correct-answer - Christmas Tree
This occurs when intense radiated heat or direct flame contacts a surface during
the fire, burning away deposits - correct-answer - Clean Burn
,3|Page
This is a fire effect to furniture that does NOT provide the investigators with clues
concerning the type of ignition source, but can show fire spread and intensity -
correct-answer - Collapsed Furniture Springs
A fire characteristic that is NOT necessarily an accurate indicator of the flame
temperature - correct-answer - Color
This feature distinguishes the heat-sensitive bulbs of sprinkler heads from each
other - correct-answer - Color Codes
A chemical process of oxidation, which occurs at a rate fast enough to produce
heat and usually light in the form of either a glow or a flame - correct-answer -
Combustion
, 4|Page
A building design feature that aims to limit the fire to its origin. - correct-answer -
Compartmentation
Located at the origin, these should be considered individually during the
development of a cause hypothesis - correct-answer - Competent Ignition Source
This should be donned when dealing with hazardous chemicals - correct-answer -
Complete PPE
An example of heat transfer, when the heating of a steel beam to an unexposed
part of a building results in a fire in that location - correct-answer - Conduction
Overheating on a circuit is most likely to occur at this location on a circuit -
correct-answer - Connection Points
