OSHA 510
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf!!
1. Managers should __________________ to demonstrate management
leadership and commitment to safety and health. - Correct Answer: - be
an example by knowing and following the rules employees are expected to
follow
2. the two main components of an employer's accident prevention
responsibilities required by 1926.20(b) a..... - Correct Answer: - Safety
and health program and jobsite inspections by a competent person
3. the maximum travel distance from an point of the protected area to the
nearest fire extinguisher shall not exceed______. - Correct Answer: -
100 feet
4. Accident prevention signs such as; danger, caution, and exit signs shall
be_________ when work is being performed. - Correct Answer: -
visable
,5. When stopping a fall, a personal fall arrest system shall bring an employee
to a complete stop and limit the maximum deceleration distance to
__________. - Correct Answer: - 3.5 feet
6. all hand and power tools, whether paid for by the employer or employee,
shall be _______________. - Correct Answer: - maintained in a safe
condition
7. A person who has a recognized degree, certificate, or professional standing
or who has demonstrated his/her ability to solve problems relating to
specific work is a ___________. - Correct Answer: - qualified person
8. Whenever practicable, all arc welding and cutting operations shall be
________ to protect employees and other persons working in the vicinity -
Correct Answer: - shielded
9. Failure to inspect for oil or grease on regular fittings, valves, or the cap
threads on a cylinder of oxygen can __________. - Correct Answer: -
result in fire or explosion
10.Personal fall arrest systems, when stopping a fall, shall be rigged such that...
- Correct Answer: - and employee cannot free fall more than 6 feet or
contact any lover level
11.When mechanical equipment is being used perpendicular to the roof edge,
the warning lines cannot be closer than __________. - Correct Answer:
- 10 feet
, 12.It is the ___________ responsibility to initiate and maintain accident
prevention programs to comply with all applicable standards. - Correct
Answer: - employer's
13.An "Assured equipment grounding conductor program" deals with the cord-
set and receptacles with are.... - Correct Answer: - not part of the
permanent wiring of the building or structure
14.________________ is the maximum voltage before guarding is required
against accidental contact by cabinets, or other forms of enclosures, or by
location in a room or enclosure accessible only to qualified persons
(electricians). - Correct Answer: - 50 volts or greater
15.The practice of connecting two metallic objects to prevent static sparks is
called ________. - Correct Answer: - bonding
16.Before the start of any work covered under Subpart V - Power Transmission
and Distribution, __________. - Correct Answer: - existing conditions
are determined by an inspection or a test.
17.OSHA requires that scaffolding being erected, moved, dismantled or altered
by supervised by a ________. - Correct Answer: - competent person
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf!!
1. Managers should __________________ to demonstrate management
leadership and commitment to safety and health. - Correct Answer: - be
an example by knowing and following the rules employees are expected to
follow
2. the two main components of an employer's accident prevention
responsibilities required by 1926.20(b) a..... - Correct Answer: - Safety
and health program and jobsite inspections by a competent person
3. the maximum travel distance from an point of the protected area to the
nearest fire extinguisher shall not exceed______. - Correct Answer: -
100 feet
4. Accident prevention signs such as; danger, caution, and exit signs shall
be_________ when work is being performed. - Correct Answer: -
visable
,5. When stopping a fall, a personal fall arrest system shall bring an employee
to a complete stop and limit the maximum deceleration distance to
__________. - Correct Answer: - 3.5 feet
6. all hand and power tools, whether paid for by the employer or employee,
shall be _______________. - Correct Answer: - maintained in a safe
condition
7. A person who has a recognized degree, certificate, or professional standing
or who has demonstrated his/her ability to solve problems relating to
specific work is a ___________. - Correct Answer: - qualified person
8. Whenever practicable, all arc welding and cutting operations shall be
________ to protect employees and other persons working in the vicinity -
Correct Answer: - shielded
9. Failure to inspect for oil or grease on regular fittings, valves, or the cap
threads on a cylinder of oxygen can __________. - Correct Answer: -
result in fire or explosion
10.Personal fall arrest systems, when stopping a fall, shall be rigged such that...
- Correct Answer: - and employee cannot free fall more than 6 feet or
contact any lover level
11.When mechanical equipment is being used perpendicular to the roof edge,
the warning lines cannot be closer than __________. - Correct Answer:
- 10 feet
, 12.It is the ___________ responsibility to initiate and maintain accident
prevention programs to comply with all applicable standards. - Correct
Answer: - employer's
13.An "Assured equipment grounding conductor program" deals with the cord-
set and receptacles with are.... - Correct Answer: - not part of the
permanent wiring of the building or structure
14.________________ is the maximum voltage before guarding is required
against accidental contact by cabinets, or other forms of enclosures, or by
location in a room or enclosure accessible only to qualified persons
(electricians). - Correct Answer: - 50 volts or greater
15.The practice of connecting two metallic objects to prevent static sparks is
called ________. - Correct Answer: - bonding
16.Before the start of any work covered under Subpart V - Power Transmission
and Distribution, __________. - Correct Answer: - existing conditions
are determined by an inspection or a test.
17.OSHA requires that scaffolding being erected, moved, dismantled or altered
by supervised by a ________. - Correct Answer: - competent person
