OSHA 510 Study Guide
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf!!
1. True or False: Workplace injuries and Illnesses can lower morale and
increased cost to train replacement workers - Correct Answer: (True) -
Workplace Injuries and Illnesses
2. According to "The Act, What is the mission of OSHA? - Correct Answer:
(Protect American Workers) - To assure safe and healthful working
conditions for working men and women by setting and enforcing standards
and by providing training, outreach, education and assistance.
3. True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which
are free from recognized hazards? - Correct Answer: False - Employees
are protected from retaliation for raising workplace health and safety
concerns and for reporting work-related injuries and illnesses with OSHA
(Without Fear of Punishment)
4. What is the Horizontal Standard? - Correct Answer: Meaning "general"
or across the board
,5. What is the process CSHO use when conducting and inspection? -
Correct Answer: 1903.7
Present Credentials
Opening Conference
Walk through
Closing conference
6. When calculating incident rate, what does the 200,000 figure in the formula
represent?
- Correct Answer: The 200,000 figure in the formula represents the
number of hours (100 employees working 40 hours per week, 50
weeks) per year would work, and provides the standard base
forcalculating incidence rates.
7. How far can a Class (A) fire extinguishers be away from the employees? -
Correct Answer: 1926.150(c)(1)(i)
A fire extinguisher, rated not less than 2A, shall be provided for each 3,000
square feet of the protected building area, or major fraction thereof. Travel
distance from any point of the protected area to the nearest fire
extinguisher shall not exceed (100 feet).
8. True or False: Accident prevention signs such as danger, caution and exits
signs shall be visible while working. - Correct Answer: True - 1926.200(a)
General signs and symbols required by this subpart shall be (visible) at all
times when work is being performed, and shall be removed or covered
promptly when the hazards no longer exist.
9. True or False: Only hand and power tools purchased by the employer must
be maintained in a safe condition, - Correct Answer: False -
, 1926.300(a)
All hand and power tools and similar equipment, whether furnished by the
employer or the employee, shall be maintained in a safe condition.
10.IAW subpart C what is the definition of Qualified Person? - Correct
Answer: 1926.32(m)
"Qualified" means one who, by possession of a recognized degree,
certificate, or professional standing, or who by extensive knowledge,
training, and experience, has successfully demonstrated his ability to solve
or resolve problems relating to the subject matter, the work, or the project.
11.True or False: Failure to inspect oil or grease on regulator fitting, valves or
cap threads on a oxygen cylinder can result in fire or explosion. - Correct
Answer: True - 1926.350(i)
Oil and grease hazards. Oxygen cylinders and fittings shall be kept away
from oil or grease. Cylinders, cylinder caps and valves, couplings, regulators,
hose, and apparatus shall be kept free from oil or greasy substances and
shall not be handled with oily hands or gloves. Oxygen shall not be directed
at oily surfaces, greasy clothes, or within a fuel oil or other storage tank or
vessel.
12.When using mechanical equipment perpendicular from the roof edge, how
far away from the roof edge must warning line be? - Correct Answer:
1926.502(f)(1)(ii)
When mechanical equipment is being used, the warning line shall be
erected not less than 6 feet (1.8 m) from the roof edge which is parallel to
the direction of mechanical equipment operation, and not less than (10
feet) from the roof edge which is perpendicular to the direction of
mechanical equipment operation.
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf!!
1. True or False: Workplace injuries and Illnesses can lower morale and
increased cost to train replacement workers - Correct Answer: (True) -
Workplace Injuries and Illnesses
2. According to "The Act, What is the mission of OSHA? - Correct Answer:
(Protect American Workers) - To assure safe and healthful working
conditions for working men and women by setting and enforcing standards
and by providing training, outreach, education and assistance.
3. True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which
are free from recognized hazards? - Correct Answer: False - Employees
are protected from retaliation for raising workplace health and safety
concerns and for reporting work-related injuries and illnesses with OSHA
(Without Fear of Punishment)
4. What is the Horizontal Standard? - Correct Answer: Meaning "general"
or across the board
,5. What is the process CSHO use when conducting and inspection? -
Correct Answer: 1903.7
Present Credentials
Opening Conference
Walk through
Closing conference
6. When calculating incident rate, what does the 200,000 figure in the formula
represent?
- Correct Answer: The 200,000 figure in the formula represents the
number of hours (100 employees working 40 hours per week, 50
weeks) per year would work, and provides the standard base
forcalculating incidence rates.
7. How far can a Class (A) fire extinguishers be away from the employees? -
Correct Answer: 1926.150(c)(1)(i)
A fire extinguisher, rated not less than 2A, shall be provided for each 3,000
square feet of the protected building area, or major fraction thereof. Travel
distance from any point of the protected area to the nearest fire
extinguisher shall not exceed (100 feet).
8. True or False: Accident prevention signs such as danger, caution and exits
signs shall be visible while working. - Correct Answer: True - 1926.200(a)
General signs and symbols required by this subpart shall be (visible) at all
times when work is being performed, and shall be removed or covered
promptly when the hazards no longer exist.
9. True or False: Only hand and power tools purchased by the employer must
be maintained in a safe condition, - Correct Answer: False -
, 1926.300(a)
All hand and power tools and similar equipment, whether furnished by the
employer or the employee, shall be maintained in a safe condition.
10.IAW subpart C what is the definition of Qualified Person? - Correct
Answer: 1926.32(m)
"Qualified" means one who, by possession of a recognized degree,
certificate, or professional standing, or who by extensive knowledge,
training, and experience, has successfully demonstrated his ability to solve
or resolve problems relating to the subject matter, the work, or the project.
11.True or False: Failure to inspect oil or grease on regulator fitting, valves or
cap threads on a oxygen cylinder can result in fire or explosion. - Correct
Answer: True - 1926.350(i)
Oil and grease hazards. Oxygen cylinders and fittings shall be kept away
from oil or grease. Cylinders, cylinder caps and valves, couplings, regulators,
hose, and apparatus shall be kept free from oil or greasy substances and
shall not be handled with oily hands or gloves. Oxygen shall not be directed
at oily surfaces, greasy clothes, or within a fuel oil or other storage tank or
vessel.
12.When using mechanical equipment perpendicular from the roof edge, how
far away from the roof edge must warning line be? - Correct Answer:
1926.502(f)(1)(ii)
When mechanical equipment is being used, the warning line shall be
erected not less than 6 feet (1.8 m) from the roof edge which is parallel to
the direction of mechanical equipment operation, and not less than (10
feet) from the roof edge which is perpendicular to the direction of
mechanical equipment operation.
