WGU D413 OBJECTIVE ASSESSMENT
COMPLETE QUESTIONS AND VERIFIED
SOLUTIONS
●● 10Base5
Answer: First IEEE 802.3 classification developed for Ethernet. (2)
●● adaptive cut-through
Answer: Frame-forwarding technique that operates as cut-through until
an unaccept-able number of corrupt frames are detected. (11)
●● ANT+
Answer: Function that can be added to base ANT protocols that allows
for interoperability; pronounced ant plus. (4)
●● asynchronous transfer mode (ATM)
Answer: Protocol designed especially for transmitting data, voice, and
video. (1)
●● asynchronous transmission
Answer: Data transmission method in which no reference signal is
present. (5)
, ●● attenuation
Answer: Loss of signal strength. (1)
●● Automatic Configuration and Power Interface (ACPI)
Answer: Standard for controlling the power options for computer
hardware devices. (9)
●● automatic medium-dependent interface crossover (Auto-MDIX)
Answer: Electronic chip technology incorpo-rated into Gigabit Ethernet
devices to automatically reassign pin func-tions and eliminate the need
for a crossover cable. (2)
●● AWG rating
Answer: Describes the size of a conductor's diameter. (2)
●● backplane
Answer: Simple motherboard designed with minimal components. (9)
●● Bandwidth Allocation Protocol (BAP)
Answer: Allows the number of lines used by MLPPP to change on
demand. (14)
●● Basic Rate ISDN (BRI-ISDN)
COMPLETE QUESTIONS AND VERIFIED
SOLUTIONS
●● 10Base5
Answer: First IEEE 802.3 classification developed for Ethernet. (2)
●● adaptive cut-through
Answer: Frame-forwarding technique that operates as cut-through until
an unaccept-able number of corrupt frames are detected. (11)
●● ANT+
Answer: Function that can be added to base ANT protocols that allows
for interoperability; pronounced ant plus. (4)
●● asynchronous transfer mode (ATM)
Answer: Protocol designed especially for transmitting data, voice, and
video. (1)
●● asynchronous transmission
Answer: Data transmission method in which no reference signal is
present. (5)
, ●● attenuation
Answer: Loss of signal strength. (1)
●● Automatic Configuration and Power Interface (ACPI)
Answer: Standard for controlling the power options for computer
hardware devices. (9)
●● automatic medium-dependent interface crossover (Auto-MDIX)
Answer: Electronic chip technology incorpo-rated into Gigabit Ethernet
devices to automatically reassign pin func-tions and eliminate the need
for a crossover cable. (2)
●● AWG rating
Answer: Describes the size of a conductor's diameter. (2)
●● backplane
Answer: Simple motherboard designed with minimal components. (9)
●● Bandwidth Allocation Protocol (BAP)
Answer: Allows the number of lines used by MLPPP to change on
demand. (14)
●● Basic Rate ISDN (BRI-ISDN)
