Module 6 NCCER into to Basic
rigging EXAMS WITH CORRECT
ANSWERS 2026/2027
1. ________________ is when wire rope strands become untwisted - ANS ✅✅-
(Unstranding)
2. _________________ slings are made of high-strength steel wires that wraps around a
core. - ANS ✅✅-(Wire rope)
3. _____________________ is the maximum load weight that a sling is designed to carry. -
ANS ✅✅-(Rated capacity)
4. A _____________ hitch is used when two or more slings connected to a load on a single
hook. - ANS ✅✅-(bridle)
5. A _____________ is used on alloy steel chain slings. - ANS ✅✅-(Grab Hook)
6. A ______________ is part of the sling that reaches attachment device around the object
being lifted. - ANS ✅✅-(sling leg)
7. A _______________ - ANS ✅✅-(rigging hook)
8. A _______________ is a group of wire wound around a center core. - ANS ✅✅-
(strand)
, 9. A ________________ is the link between the load and the lifting device. - ANS ✅✅-
(shackle)
10. A _________________ is a single ring that attaches multiple slings to a hoist hook. - ANS
✅✅-(bull ring)
11. A __________________ is the distance between the master link of the sling to either the
end fitting sling or the lowest point on the basket. - ANS ✅✅-(sling reach)
12. A ___________________ is a simple rope-and-pulley system used to lift loads. - ANS
✅✅-(block and tackle)
13. A ___________________ is used to determine is an sling has been overloaded. - ANS
✅✅-(tattle-tail)
14. A ____________________ has a recognized degree , certificate , or professional standing
, extensive knowledge , training , and experience , has shown the ability to solve
problem relating to subject matter. - ANS ✅✅-(qualified person)
15. A ____________________ is good for moving loads such as steel plates or concrete
panels. - ANS ✅✅-(lifting clamp)
16. A ________________________ is the distance it take for one strand of a wire rope that
makes a complete turn around the core. - ANS ✅✅-(one-rope lay)
17. A hand-operated winching device that should never be used for vertical overhead
liftingis a ( - ANS ✅✅-come-along
18. A lifting clamp is most likely to be used to move loads such as _____________ - ANS
✅✅-(steel plates).
rigging EXAMS WITH CORRECT
ANSWERS 2026/2027
1. ________________ is when wire rope strands become untwisted - ANS ✅✅-
(Unstranding)
2. _________________ slings are made of high-strength steel wires that wraps around a
core. - ANS ✅✅-(Wire rope)
3. _____________________ is the maximum load weight that a sling is designed to carry. -
ANS ✅✅-(Rated capacity)
4. A _____________ hitch is used when two or more slings connected to a load on a single
hook. - ANS ✅✅-(bridle)
5. A _____________ is used on alloy steel chain slings. - ANS ✅✅-(Grab Hook)
6. A ______________ is part of the sling that reaches attachment device around the object
being lifted. - ANS ✅✅-(sling leg)
7. A _______________ - ANS ✅✅-(rigging hook)
8. A _______________ is a group of wire wound around a center core. - ANS ✅✅-
(strand)
, 9. A ________________ is the link between the load and the lifting device. - ANS ✅✅-
(shackle)
10. A _________________ is a single ring that attaches multiple slings to a hoist hook. - ANS
✅✅-(bull ring)
11. A __________________ is the distance between the master link of the sling to either the
end fitting sling or the lowest point on the basket. - ANS ✅✅-(sling reach)
12. A ___________________ is a simple rope-and-pulley system used to lift loads. - ANS
✅✅-(block and tackle)
13. A ___________________ is used to determine is an sling has been overloaded. - ANS
✅✅-(tattle-tail)
14. A ____________________ has a recognized degree , certificate , or professional standing
, extensive knowledge , training , and experience , has shown the ability to solve
problem relating to subject matter. - ANS ✅✅-(qualified person)
15. A ____________________ is good for moving loads such as steel plates or concrete
panels. - ANS ✅✅-(lifting clamp)
16. A ________________________ is the distance it take for one strand of a wire rope that
makes a complete turn around the core. - ANS ✅✅-(one-rope lay)
17. A hand-operated winching device that should never be used for vertical overhead
liftingis a ( - ANS ✅✅-come-along
18. A lifting clamp is most likely to be used to move loads such as _____________ - ANS
✅✅-(steel plates).
