Ampp C3 Test Bank Complete Solved Questions Expert Review Full Solution.pdf

AMPP C3 TEST BANK COMPLETE SOLVED
QUESTIONS EXPERT REVIEW FULL
SOLUTION

●● NACE SP0188
Answer: Discontinuity (Holiday) Testing of New Protective Coatings on
Conductive Substrates


●● NACE SP0178
Answer: design/fabrication/surface finish practices for tanks an vessels
to be lined for immersion service


●● ASTM D 4417
Answer: Standard Test Methods for Field Measurement of Surface
Profile of Blast Cleaned Steel


●● SP5, SP10, SP6, SP14, SP7 in NACE order
Answer: 1, 2, 3, 8, 4


●● ISO 8501-1 Sa 3
Answer: Blast Cleaning to Visually Clean Steel

,●● ISO 8501-1 Sa 2 1/2
Answer: Very Thorough Blast Cleaning


●● ISO 8501-1 Sa 2
Answer: Thorough Blast Cleaning


●● ISO 8501-1 Sa 1
Answer: Light Blast Cleaning


●● ISO 8501-1 St 2
Answer: Thorough Hand and Power Tool Cleaning


●● ISO 8501-1 St 3
Answer: Very Thorough Hand and Power Tool Cleaning


●● SSPC-SP 2
Answer: Hand Tool Cleaning; removes all loose mill scale, rust, and
coatings


●● SSPC-SP 3
Answer: Power Tool Cleaning- loose stuff that a putty knife could get

, ●● SSPC-SP 11
Answer: Power Tool Cleaning to Bare Metal


●● Don't use air to blow off surface of a coating
Answer: Lead is present


●● Silicone coating, important to
Answer: Ensure correct application and DFT


●● NACE NO. 12 / AWS C2.23M / SSPC-2300:
Answer: Specification for application of thermal spray coatings.


●● Three galvanic anodes for carbon steel
Answer: Zinc, aluminum, magnesium


●● Corrosion occurring uniformly across a surface is called
Answer: General corrosion


●● Three general components of inspection reports
Answer: Results of inspection tests, location of work, details of
preparation and application