CPO TEST PAPER QUESTIONS CORRECT ANSWERS GRADED A PLUS SET FIVE
Question:
The most common form of treatment for diabetic retinopathy is:
Answer:
laser
Question:
Color vision is usually evaluated at what distance?
Answer:
30 inches
Question:
The prescription of plano-3.00x090 is an example of a
Answer:
Planocylindrical Lens
Question:
Which of the following instruments is used to measure the curvature of the cornea?
Answer:
Ophthalmometer and Keratometer
Question:
,When performing lensometry, if both crossed lines do not come into focus at the same time, that is
an indication that
Answer:
There is a cylinder component
Question:
The smallest unit of lens measure is generally
Answer:
0.25 Diopter
Question:
On orders that include prism, both the amount of prism and the prism __________ direction should
be specified.
Answer:
base
Question:
The primary meridian refers to which one of the following?
Answer:
The horizontal measurement of the cornea
Question:
What should be done first when determining Spherical power of the lens in the Lensometer?
Answer:
Start with plus power and rotate power wheel until spherical line is focused
Question:
,A prescription containing a sphere, cylinder and axis are prescribed for
Answer:
Astigmatism
Question:
Pursuits are eye movements of what kind?
Answer:
As they follow a moving target
Question:
Before Goldmann Applanation Tonometry, a patient should be given one drop of
Answer:
Proparacaine
Question:
According to HIPAA, how must a patient request their medical records?
Answer:
signing a records release
Question:
The interpupillary distance is measured in which one of the following units of measure?
Answer:
Millimeters
Question:
A patient calls and says they are running about thirty minutes late for their appointment. First, you
should
, Answer:
Confirm with the office manager or optometrist if the patient can be seen
Question:
The add power of a lens is
Answer:
The last component of a lens prescription
Question:
Metamorphopsia (often found in low vision patients) is measured with which one of the following?
Answer:
The Amsler Grid
Question:
Standard ophthalmic plastic lenses are made from a material called __________.
Answer:
CR-39
Question:
Polycarbonate lenses do not need ___________ coating, since their surfaces already have this
property.
Answer:
ultraviolet
Question:
A right tropia is evident when _________.
Answer:
Question:
The most common form of treatment for diabetic retinopathy is:
Answer:
laser
Question:
Color vision is usually evaluated at what distance?
Answer:
30 inches
Question:
The prescription of plano-3.00x090 is an example of a
Answer:
Planocylindrical Lens
Question:
Which of the following instruments is used to measure the curvature of the cornea?
Answer:
Ophthalmometer and Keratometer
Question:
,When performing lensometry, if both crossed lines do not come into focus at the same time, that is
an indication that
Answer:
There is a cylinder component
Question:
The smallest unit of lens measure is generally
Answer:
0.25 Diopter
Question:
On orders that include prism, both the amount of prism and the prism __________ direction should
be specified.
Answer:
base
Question:
The primary meridian refers to which one of the following?
Answer:
The horizontal measurement of the cornea
Question:
What should be done first when determining Spherical power of the lens in the Lensometer?
Answer:
Start with plus power and rotate power wheel until spherical line is focused
Question:
,A prescription containing a sphere, cylinder and axis are prescribed for
Answer:
Astigmatism
Question:
Pursuits are eye movements of what kind?
Answer:
As they follow a moving target
Question:
Before Goldmann Applanation Tonometry, a patient should be given one drop of
Answer:
Proparacaine
Question:
According to HIPAA, how must a patient request their medical records?
Answer:
signing a records release
Question:
The interpupillary distance is measured in which one of the following units of measure?
Answer:
Millimeters
Question:
A patient calls and says they are running about thirty minutes late for their appointment. First, you
should
, Answer:
Confirm with the office manager or optometrist if the patient can be seen
Question:
The add power of a lens is
Answer:
The last component of a lens prescription
Question:
Metamorphopsia (often found in low vision patients) is measured with which one of the following?
Answer:
The Amsler Grid
Question:
Standard ophthalmic plastic lenses are made from a material called __________.
Answer:
CR-39
Question:
Polycarbonate lenses do not need ___________ coating, since their surfaces already have this
property.
Answer:
ultraviolet
Question:
A right tropia is evident when _________.
Answer:
