D469 Exam 2
1. A fixtures installer or contractor does now not need to subject verify existing dimensions of
the gap or structure against the ones shown at the set up plan, as the designer's drawings
are always assumed accurate.
A. This announcement is actual
b. This declaration is fake - ANS-b. This assertion is fake
1. A window that's hinged at the lowest and may swing in or out is called a ____________
window.
A. Casement
b. Awning
c. Hopper
d. Jalousie
e. Double hung - ANS-c. Hopper
1. Finish plans are drawn at a massive scale as they ought to accurately convey information
vital for placing finishes.
A. This assertion is fake
b. This assertion is authentic - ANS-a. This declaration is fake
1. In creation drawings, movable furniture ________________ inside the building phase
drawings.
A. Typically not shown
b. Constantly proven
c. Proven with dashed strains
d. Is proven in isometric view to be dimensioned elsewhere
e. Is known as out - ANS-a. Usually not proven
1. In drawing cupboard elevations, the route of cabinet door swings are frequently shown
with__________ strains inside the elevation views.
A. Reversed
b. Mild
c. Curved
d. Dashed
e. Stable - ANS-d. Dashed
1. In the layout of industrial areas, wherein corporate environments can be covered, the
spacing of outdoors home windows and columns normally set the modular unit, that is
typically ___________.
A. 2′-zero′′(.6m) or 3′-0′′(.9m)
b. 3′zero′′(.9m) or 4′zero′′(1.22m)
c. 4′-0′′(1.22m) or 5′zero′′(1.52m)
d. 5′-0′′(1.52m) or 6′-0′′(1.83m)
,e. 6′zero′′(1.83m) or 8′0′′(2.43m) - ANS-d. 5′-0′′(1.52m) or 6′-0′′(1.83m)
1. Most residential constructing codes now require smoke detectors and alarms
_____________ a drowsing room.
A. Inside
b. Out of doors
c. Internal and simply outdoor
d. Above
e. Under - ANS-c. Internal and just out of doors
1. The angled dashed line drawn close to the midpoint of a door elevation indicates the
_________ aspect of the door or cabinet door.
A. Door knob
b. Sill
c. Astragal
d. Hinge
e. Closer - ANS-d. Hinge
1. When drafting a demolition plan(s), which will allow the viewer to envision the size of
gadgets and capabilities, it's far usually drawn ________________ as the floor plans.
A. At half of the scale
b. The identical scale
c. At two times the scaled as a reversed photo
d. Three instances the size - ANS-b. The same scale
2. _____________ concerns for selection of finishes include environmental impact for
acquisition, manufacturing efficiency, renewable sources, recyclable content material,
non-toxicity to customers, and moisture resistance for inhibiting increase of biological
contaminants.
A. Flammability
b. Ecological
c. Economical
d. Life-cycle costs
e. Rejuvenation - ANS-b. Ecological
2. Building code compliance and hearth and existence safety should also include provisions
for freedom of get admission to and egress for all people, which become the passing of the
_________ Americans with Disabilities Act, and up to date in 2010.
A. 1970
b. 1985
c. 1990
d. 2000
e. Two hundred - ANS-c. 1990
2. Fire doorways need to be ___________________ and feature proper latching devices to
contain the possible unfold of fireplace, smoke, and toxic gases.
A. Without difficulty opened
b. With no glass
, c. Non-rated
d. Ready with an alarm
e. Self-remaining - ANS-e. Self-closing
2. Generally the dimensions of the floor plan is placed ____________ the name.
A. Above
b. Below
c. On the top proper
d. At a larger scale than - ANS-b. Under
2. Generally, there isn't always numerous dimensioning positioned on the furniture
installation plan. However, in a few precise instances, which include with systems furniture,
vital clearances and alignment with other objects would possibly want to be dimensioned
immediately on the plan.
A. This announcement is true
b. This announcement is fake - ANS-a. This statement is authentic
2. In drawing a segment thru an item, the traces or outlines round these sliced materials are
drawn with ________________ traces to accessory the reduce.
A. Light
b. Heavy thick
c. Medium
d. Dashed
e. Skinny - ANS-b. Heavy thick
2. In drawing elevations, the width of a wall or room is quality dimensioned at the
_____________.
A. The elevation
b. Wall segment
c. Building section
d. Ground plan
e. Cabinetry drawings - ANS-d. Ground plan
2. The terminating baluster at the lowest or pinnacle of a stair, that is generally larger than
the other balusters is known as a _______________.
A. Guardrail
b. Newel submit
c. Winder
d. Stringer
e. Nosing - ANS-b. Newel publish
2. Title blocks on production-drawing sheets are commonly positioned alongside the left
aspect of the sheet for ease of analyzing left to right.
T/F - ANS-False
2. When no former plans exist of a building or indoors area to be renovated, new drawings
should be made thru a method typically referred to as _______.
A. Alternative measurements
1. A fixtures installer or contractor does now not need to subject verify existing dimensions of
the gap or structure against the ones shown at the set up plan, as the designer's drawings
are always assumed accurate.
A. This announcement is actual
b. This declaration is fake - ANS-b. This assertion is fake
1. A window that's hinged at the lowest and may swing in or out is called a ____________
window.
A. Casement
b. Awning
c. Hopper
d. Jalousie
e. Double hung - ANS-c. Hopper
1. Finish plans are drawn at a massive scale as they ought to accurately convey information
vital for placing finishes.
A. This assertion is fake
b. This assertion is authentic - ANS-a. This declaration is fake
1. In creation drawings, movable furniture ________________ inside the building phase
drawings.
A. Typically not shown
b. Constantly proven
c. Proven with dashed strains
d. Is proven in isometric view to be dimensioned elsewhere
e. Is known as out - ANS-a. Usually not proven
1. In drawing cupboard elevations, the route of cabinet door swings are frequently shown
with__________ strains inside the elevation views.
A. Reversed
b. Mild
c. Curved
d. Dashed
e. Stable - ANS-d. Dashed
1. In the layout of industrial areas, wherein corporate environments can be covered, the
spacing of outdoors home windows and columns normally set the modular unit, that is
typically ___________.
A. 2′-zero′′(.6m) or 3′-0′′(.9m)
b. 3′zero′′(.9m) or 4′zero′′(1.22m)
c. 4′-0′′(1.22m) or 5′zero′′(1.52m)
d. 5′-0′′(1.52m) or 6′-0′′(1.83m)
,e. 6′zero′′(1.83m) or 8′0′′(2.43m) - ANS-d. 5′-0′′(1.52m) or 6′-0′′(1.83m)
1. Most residential constructing codes now require smoke detectors and alarms
_____________ a drowsing room.
A. Inside
b. Out of doors
c. Internal and simply outdoor
d. Above
e. Under - ANS-c. Internal and just out of doors
1. The angled dashed line drawn close to the midpoint of a door elevation indicates the
_________ aspect of the door or cabinet door.
A. Door knob
b. Sill
c. Astragal
d. Hinge
e. Closer - ANS-d. Hinge
1. When drafting a demolition plan(s), which will allow the viewer to envision the size of
gadgets and capabilities, it's far usually drawn ________________ as the floor plans.
A. At half of the scale
b. The identical scale
c. At two times the scaled as a reversed photo
d. Three instances the size - ANS-b. The same scale
2. _____________ concerns for selection of finishes include environmental impact for
acquisition, manufacturing efficiency, renewable sources, recyclable content material,
non-toxicity to customers, and moisture resistance for inhibiting increase of biological
contaminants.
A. Flammability
b. Ecological
c. Economical
d. Life-cycle costs
e. Rejuvenation - ANS-b. Ecological
2. Building code compliance and hearth and existence safety should also include provisions
for freedom of get admission to and egress for all people, which become the passing of the
_________ Americans with Disabilities Act, and up to date in 2010.
A. 1970
b. 1985
c. 1990
d. 2000
e. Two hundred - ANS-c. 1990
2. Fire doorways need to be ___________________ and feature proper latching devices to
contain the possible unfold of fireplace, smoke, and toxic gases.
A. Without difficulty opened
b. With no glass
, c. Non-rated
d. Ready with an alarm
e. Self-remaining - ANS-e. Self-closing
2. Generally the dimensions of the floor plan is placed ____________ the name.
A. Above
b. Below
c. On the top proper
d. At a larger scale than - ANS-b. Under
2. Generally, there isn't always numerous dimensioning positioned on the furniture
installation plan. However, in a few precise instances, which include with systems furniture,
vital clearances and alignment with other objects would possibly want to be dimensioned
immediately on the plan.
A. This announcement is true
b. This announcement is fake - ANS-a. This statement is authentic
2. In drawing a segment thru an item, the traces or outlines round these sliced materials are
drawn with ________________ traces to accessory the reduce.
A. Light
b. Heavy thick
c. Medium
d. Dashed
e. Skinny - ANS-b. Heavy thick
2. In drawing elevations, the width of a wall or room is quality dimensioned at the
_____________.
A. The elevation
b. Wall segment
c. Building section
d. Ground plan
e. Cabinetry drawings - ANS-d. Ground plan
2. The terminating baluster at the lowest or pinnacle of a stair, that is generally larger than
the other balusters is known as a _______________.
A. Guardrail
b. Newel submit
c. Winder
d. Stringer
e. Nosing - ANS-b. Newel publish
2. Title blocks on production-drawing sheets are commonly positioned alongside the left
aspect of the sheet for ease of analyzing left to right.
T/F - ANS-False
2. When no former plans exist of a building or indoors area to be renovated, new drawings
should be made thru a method typically referred to as _______.
A. Alternative measurements
