Georgia Class E License Practice Test
Study online at https://quizlet.com/_gacnd1
1. 1. What is the minimum amount of tread depth that A. There should be at least
your tires should have? four-thirty seconds (4/32)
A. There should be at least four-thirty seconds (4/32) inch of tread depth in
inch of tread depth in every major groove on the front every major groove on the
wheels and at least two-thirty seconds (2/32) inch tread front wheels and at least
on all other wheels. two-thirty seconds (2/32)
B. There should be at least one-inch tread depth in inch tread on all other
every major groove on all wheels. wheels.
C. There should be at least four-thirty seconds inch
tread depth in every major groove on all wheels.
2. 2. How do you test hydraulic brakes for a leak? C. With the vehicle
A. With the vehicle under way at a low speed, apply firm stopped, pump the brake
pressure, stopping the vehicle as quickly as possible. pedal three times. Apply
B. With the vehicle stopped, push down the brake ped- firm pressure, and then
al and do not release for at least five seconds. hold for five seconds.
C. With the vehicle stopped, pump the brake pedal
three times. Apply firm pressure, and then hold for five
seconds.
3. 3. How do you test hydraulic brakes for their stopping A. Go about 5 mph. Push
action? the brake pedal firmly.
A. Go about 5 mph. Push the brake pedal firmly.
B. With the vehicle stopped, pump the brake pedal
three times. Apply firm pressure, and then hold for five
seconds.
C. With the vehicle stopped, push the brake pedal firm-
ly, and then hold for five seconds.
4. 4. How does tire pressure affect hydroplaning? B. Hydroplaning is more
A. Hydroplaning is not affected by tire pressure. likely to occur when tire
B. Hydroplaning is more likely to occur when tire pres- pressure is low.
, Georgia Class E License Practice Test
Study online at https://quizlet.com/_gacnd1
sure is low.
C. Hydroplaning is more likely to occur when tires are
over inflated.
5. 5. What is the best way to use the brake pedal on a C. Shift to a lower gear be-
steep downhill grade? fore starting downgrade
A. Use a heavy pressure repeatedly. and use a light, steady
B. Avoid using the brakes. pressure on the brake
C. Shift to a lower gear before starting downgrade and pedal.
use a light, steady pressure on the brake pedal.
6. 6. What is a good rule as to the speed you should go A. You should keep your
when driving at night? speed slow enough to stop
A. You should keep your speed slow enough to stop within the range of your
within the range of your headlights. headlights.
B. You do not have to be able to stop within the dis-
tance that you can see.
C. You should never drive so fast as to require your
high beams.
7. 7. How many times more distance does it take to stop C. Four times as much dis-
whenever you double your speed? tance.
A. Twice as much distance.
B. Three times as much distance.
C. Four times as much distance.
8. 8. In checking tires what are some problems that you B. Bad wear, cuts or other
should look for? damage, tread separation,
A. Too much or too little specification information on cut or cracked valve stems.
the sidewalls. Dual tires that come in
B. Bad wear, cuts or other damage, tread separation, contact, mismatched sizes,
cut or cracked valve stems. Dual tires that come in con- radial and bias-ply tires
tact, mismatched sizes, radial and bias-ply tires used used together.
Study online at https://quizlet.com/_gacnd1
1. 1. What is the minimum amount of tread depth that A. There should be at least
your tires should have? four-thirty seconds (4/32)
A. There should be at least four-thirty seconds (4/32) inch of tread depth in
inch of tread depth in every major groove on the front every major groove on the
wheels and at least two-thirty seconds (2/32) inch tread front wheels and at least
on all other wheels. two-thirty seconds (2/32)
B. There should be at least one-inch tread depth in inch tread on all other
every major groove on all wheels. wheels.
C. There should be at least four-thirty seconds inch
tread depth in every major groove on all wheels.
2. 2. How do you test hydraulic brakes for a leak? C. With the vehicle
A. With the vehicle under way at a low speed, apply firm stopped, pump the brake
pressure, stopping the vehicle as quickly as possible. pedal three times. Apply
B. With the vehicle stopped, push down the brake ped- firm pressure, and then
al and do not release for at least five seconds. hold for five seconds.
C. With the vehicle stopped, pump the brake pedal
three times. Apply firm pressure, and then hold for five
seconds.
3. 3. How do you test hydraulic brakes for their stopping A. Go about 5 mph. Push
action? the brake pedal firmly.
A. Go about 5 mph. Push the brake pedal firmly.
B. With the vehicle stopped, pump the brake pedal
three times. Apply firm pressure, and then hold for five
seconds.
C. With the vehicle stopped, push the brake pedal firm-
ly, and then hold for five seconds.
4. 4. How does tire pressure affect hydroplaning? B. Hydroplaning is more
A. Hydroplaning is not affected by tire pressure. likely to occur when tire
B. Hydroplaning is more likely to occur when tire pres- pressure is low.
, Georgia Class E License Practice Test
Study online at https://quizlet.com/_gacnd1
sure is low.
C. Hydroplaning is more likely to occur when tires are
over inflated.
5. 5. What is the best way to use the brake pedal on a C. Shift to a lower gear be-
steep downhill grade? fore starting downgrade
A. Use a heavy pressure repeatedly. and use a light, steady
B. Avoid using the brakes. pressure on the brake
C. Shift to a lower gear before starting downgrade and pedal.
use a light, steady pressure on the brake pedal.
6. 6. What is a good rule as to the speed you should go A. You should keep your
when driving at night? speed slow enough to stop
A. You should keep your speed slow enough to stop within the range of your
within the range of your headlights. headlights.
B. You do not have to be able to stop within the dis-
tance that you can see.
C. You should never drive so fast as to require your
high beams.
7. 7. How many times more distance does it take to stop C. Four times as much dis-
whenever you double your speed? tance.
A. Twice as much distance.
B. Three times as much distance.
C. Four times as much distance.
8. 8. In checking tires what are some problems that you B. Bad wear, cuts or other
should look for? damage, tread separation,
A. Too much or too little specification information on cut or cracked valve stems.
the sidewalls. Dual tires that come in
B. Bad wear, cuts or other damage, tread separation, contact, mismatched sizes,
cut or cracked valve stems. Dual tires that come in con- radial and bias-ply tires
tact, mismatched sizes, radial and bias-ply tires used used together.
