___________________________________________________________________
Georgia Accessibility Inspector
Examination Advanced Practice Exam
2026 | 100 Questions & Answers with
Detailed Rationales | Complete Exam
Prep & Study Guide
1. Under accessibility requirements, which principle is most important when
evaluating an accessible route through a building?
A. It must always be the shortest route.
B. It must be separated from all other circulation.
C. It must provide a continuous, unobstructed path connecting required
accessible spaces and elements.
D. It must be located only at the building's main entrance.
Answer: C. It must provide a continuous, unobstructed path connecting required
accessible spaces and elements.
Rationale: An accessible route must provide continuous access between required
accessible areas. Changes in level, obstructions, excessive slopes, or inadequate
clearances can interrupt the route.
2. A ramp has a running slope of 1:10. How should an inspector generally
evaluate this slope under typical ADA accessibility criteria?
A. It automatically complies because it is less than 1:8.
B. It is steeper than the typical maximum ramp running slope of 1:12 and
,therefore generally does not comply.
C. It complies if the ramp is less than 10 feet long.
D. It complies if handrails are installed.
Answer: B. It is steeper than the typical maximum ramp running slope of 1:12
and therefore generally does not comply.
Rationale: A ramp generally may not exceed a 1:12 running slope under the ADA
Standards. Handrails do not make an excessively steep ramp compliant.
3. When inspecting a door on an accessible route, which condition is most
likely to create a compliance problem?
A. A lever handle
B. A door with low opening force
C. Insufficient maneuvering clearance at the latch side
D. A smooth door surface
Answer: C. Insufficient maneuvering clearance at the latch side
Rationale: Accessible doors require adequate maneuvering clearance so a
person using a wheelchair or mobility device can approach, operate, and pass
through the doorway.
4. Which measurement is most directly relevant when determining whether a
doorway provides sufficient accessible passage?
A. Door height
B. Clear opening width
C. Wall thickness
D. Frame color
Answer: B. Clear opening width
Rationale: Accessibility requirements address the usable clear opening rather
than simply the nominal width of the door leaf.
, 5. A ramp rises 30 inches. Using a maximum running slope of 1:12, what is the
minimum theoretical ramp run before considering landings?
A. 15 feet
B. 20 feet
C. 30 feet
D. 36 feet
Answer: C. 30 feet
Rationale: At 1:12, every 1 inch of vertical rise requires at least 12 inches of
horizontal run. Thirty inches of rise therefore requires 360 inches, or 30 feet, of
run.
6. Which feature is primarily intended to provide tactile information to a
person who is blind or has low vision?
A. High-contrast flooring
B. Tactile characters and Braille
C. Audible lighting
D. Textured ceiling panels
Answer: B. Tactile characters and Braille
Rationale: Tactile characters and Braille allow individuals with visual disabilities
to identify signs and important building information through touch.
7. An inspector finds that an accessible route contains a vertical change in
level that exceeds the permitted threshold for a simple floor transition.
What is the most appropriate initial concern?
A. Wall color
B. Ceiling height
C. Whether a compliant ramp, bevel, or other permitted transition is required
D. Door hardware finish
Answer: C. Whether a compliant ramp, bevel, or other permitted transition is
required
, Rationale: Changes in level can create barriers to wheelchair and mobility-
device users. The treatment depends on the magnitude and configuration of the
change.
8. Which characteristic is essential for an accessible toilet room maneuvering
space?
A. Carpeted flooring
B. Adequate clear floor space and turning space where required
C. A minimum ceiling height of 12 feet
D. A raised threshold at the entrance
Answer: B. Adequate clear floor space and turning space where required
Rationale: Accessible toilet rooms must provide sufficient space for users of
wheelchairs and other mobility devices to approach fixtures, maneuver, and
transfer.
9. Which condition at an accessible parking space would most likely constitute
a serious accessibility deficiency?
A. The space has white striping.
B. The space is near a building entrance.
C. The access aisle is obstructed by a fixed object.
D. The pavement is concrete.
Answer: C. The access aisle is obstructed by a fixed object.
Rationale: Access aisles provide necessary space for deploying ramps or lifts and
transferring from vehicles. Obstructions can make the accessible parking space
unusable.
10.What is the primary purpose of an accessible parking access aisle?
A. To increase parking capacity
B. To provide additional vehicle storage
C. To provide space for wheelchair and mobility-device access between the
Georgia Accessibility Inspector
Examination Advanced Practice Exam
2026 | 100 Questions & Answers with
Detailed Rationales | Complete Exam
Prep & Study Guide
1. Under accessibility requirements, which principle is most important when
evaluating an accessible route through a building?
A. It must always be the shortest route.
B. It must be separated from all other circulation.
C. It must provide a continuous, unobstructed path connecting required
accessible spaces and elements.
D. It must be located only at the building's main entrance.
Answer: C. It must provide a continuous, unobstructed path connecting required
accessible spaces and elements.
Rationale: An accessible route must provide continuous access between required
accessible areas. Changes in level, obstructions, excessive slopes, or inadequate
clearances can interrupt the route.
2. A ramp has a running slope of 1:10. How should an inspector generally
evaluate this slope under typical ADA accessibility criteria?
A. It automatically complies because it is less than 1:8.
B. It is steeper than the typical maximum ramp running slope of 1:12 and
,therefore generally does not comply.
C. It complies if the ramp is less than 10 feet long.
D. It complies if handrails are installed.
Answer: B. It is steeper than the typical maximum ramp running slope of 1:12
and therefore generally does not comply.
Rationale: A ramp generally may not exceed a 1:12 running slope under the ADA
Standards. Handrails do not make an excessively steep ramp compliant.
3. When inspecting a door on an accessible route, which condition is most
likely to create a compliance problem?
A. A lever handle
B. A door with low opening force
C. Insufficient maneuvering clearance at the latch side
D. A smooth door surface
Answer: C. Insufficient maneuvering clearance at the latch side
Rationale: Accessible doors require adequate maneuvering clearance so a
person using a wheelchair or mobility device can approach, operate, and pass
through the doorway.
4. Which measurement is most directly relevant when determining whether a
doorway provides sufficient accessible passage?
A. Door height
B. Clear opening width
C. Wall thickness
D. Frame color
Answer: B. Clear opening width
Rationale: Accessibility requirements address the usable clear opening rather
than simply the nominal width of the door leaf.
, 5. A ramp rises 30 inches. Using a maximum running slope of 1:12, what is the
minimum theoretical ramp run before considering landings?
A. 15 feet
B. 20 feet
C. 30 feet
D. 36 feet
Answer: C. 30 feet
Rationale: At 1:12, every 1 inch of vertical rise requires at least 12 inches of
horizontal run. Thirty inches of rise therefore requires 360 inches, or 30 feet, of
run.
6. Which feature is primarily intended to provide tactile information to a
person who is blind or has low vision?
A. High-contrast flooring
B. Tactile characters and Braille
C. Audible lighting
D. Textured ceiling panels
Answer: B. Tactile characters and Braille
Rationale: Tactile characters and Braille allow individuals with visual disabilities
to identify signs and important building information through touch.
7. An inspector finds that an accessible route contains a vertical change in
level that exceeds the permitted threshold for a simple floor transition.
What is the most appropriate initial concern?
A. Wall color
B. Ceiling height
C. Whether a compliant ramp, bevel, or other permitted transition is required
D. Door hardware finish
Answer: C. Whether a compliant ramp, bevel, or other permitted transition is
required
, Rationale: Changes in level can create barriers to wheelchair and mobility-
device users. The treatment depends on the magnitude and configuration of the
change.
8. Which characteristic is essential for an accessible toilet room maneuvering
space?
A. Carpeted flooring
B. Adequate clear floor space and turning space where required
C. A minimum ceiling height of 12 feet
D. A raised threshold at the entrance
Answer: B. Adequate clear floor space and turning space where required
Rationale: Accessible toilet rooms must provide sufficient space for users of
wheelchairs and other mobility devices to approach fixtures, maneuver, and
transfer.
9. Which condition at an accessible parking space would most likely constitute
a serious accessibility deficiency?
A. The space has white striping.
B. The space is near a building entrance.
C. The access aisle is obstructed by a fixed object.
D. The pavement is concrete.
Answer: C. The access aisle is obstructed by a fixed object.
Rationale: Access aisles provide necessary space for deploying ramps or lifts and
transferring from vehicles. Obstructions can make the accessible parking space
unusable.
10.What is the primary purpose of an accessible parking access aisle?
A. To increase parking capacity
B. To provide additional vehicle storage
C. To provide space for wheelchair and mobility-device access between the
