TFM10 NFPA 24 COMPREHENSIVE EXAM
QUESTIONS AND ANSWERS SET A+
✔✔ASME B16.3 -✔✔Malleable Iron Threaded Fittings - CL150 & CL300
✔✔ASME B16.4 -✔✔Gray Iron Threaded Fittings - CL 125 & 250
✔✔ASME B16.15 -✔✔Cast Copper Alloy Threaded Fittings - CL 125 & 250
✔✔ASME B16.18 -✔✔Cast Copper Alloy Solder Joint Pressure Fittings
✔✔ASME B16.22 -✔✔Wrought Copper and Copper Aloy Solder Joint Pressure Fittings
✔✔ASTM A53/A53M -✔✔Standard Specification for Pipe, Steel, Black & Hot-Dipped,
Zinc-Coated, Welded and Seamless
✔✔ASTM A135/A135M -✔✔Standard Specification for Electric Resistance Welded
(ERW) Steel Pipe
✔✔ASTM A312/312M -✔✔Standard Specification for Seamless, Welded, and Heavily
Cold Worked Austenitic SS Pipes
✔✔ASTM A403/A403M -✔✔Specification for Wrought Austenitic SS Pipe Fittings
✔✔ASTM A795/795M -✔✔Standard Specification for Black and Hot-Dipped Zinc
Coated (Galvanized) Welded and Seamless Steel Pipe for FIRE PROTECTION USE
✔✔ASTM B43 -✔✔Specification for Seamless Red Brass Pipe, Standard Sizes
✔✔ASTM B75/B75M -✔✔Specification for Seamless Copper Tube
✔✔ASTM B88 -✔✔Specification for Seamless Copper Water Tube
, ✔✔ASTM B251/B251M -✔✔Standard Specification for General Requirements for
Wrought Seamless Copper and Copper-Alloy Tube
✔✔ASTM SI10 -✔✔American National Standard for Metric Practice
✔✔AWWA C104/A21.4 -✔✔Cement-Mortar Lining for Ductile Iron Pipe & Fittings
✔✔AWWA C105/A21.5 -✔✔Polyethylene Encasement for Ductile-Iron Pipe Systems
✔✔AWWA C110/A21.10 -✔✔Ductile-Iron and Gray-Iron Fittings
✔✔AWWA C111/A21.11 -✔✔Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and
Fittings
✔✔AWWA C115/A21.15 -✔✔Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron
Threaded Flanges
✔✔AWWA C150/A21.50 -✔✔Thickness Design of Ductile-Iron Pipe
✔✔AWWA C151/A21.51 -✔✔Ductile-Iron Pipe, Centrifugally Cast
✔✔AWWA C153/A21.53 -✔✔Ductile-Iron Compact Fittings
✔✔AWWA C300 -✔✔Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C301 -✔✔Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C302 -✔✔Reinforced Concrete Pressure Pipe, Noncylinder Type
✔✔AWWA C303 -✔✔Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
✔✔AWWA C600 -✔✔Installation of Ductile-Iron Water Mains and Their Appurtenances
✔✔AWWA C602 -✔✔Cement-Mortar Lining of Water Pipe Lines in Place, 4in and
Larger
✔✔AWWA C900 -✔✔Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings,
4" to 60"
✔✔AWWA C909 -✔✔Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4"
to 24" for Water, Wastewater, and Reclaimed Water Service
QUESTIONS AND ANSWERS SET A+
✔✔ASME B16.3 -✔✔Malleable Iron Threaded Fittings - CL150 & CL300
✔✔ASME B16.4 -✔✔Gray Iron Threaded Fittings - CL 125 & 250
✔✔ASME B16.15 -✔✔Cast Copper Alloy Threaded Fittings - CL 125 & 250
✔✔ASME B16.18 -✔✔Cast Copper Alloy Solder Joint Pressure Fittings
✔✔ASME B16.22 -✔✔Wrought Copper and Copper Aloy Solder Joint Pressure Fittings
✔✔ASTM A53/A53M -✔✔Standard Specification for Pipe, Steel, Black & Hot-Dipped,
Zinc-Coated, Welded and Seamless
✔✔ASTM A135/A135M -✔✔Standard Specification for Electric Resistance Welded
(ERW) Steel Pipe
✔✔ASTM A312/312M -✔✔Standard Specification for Seamless, Welded, and Heavily
Cold Worked Austenitic SS Pipes
✔✔ASTM A403/A403M -✔✔Specification for Wrought Austenitic SS Pipe Fittings
✔✔ASTM A795/795M -✔✔Standard Specification for Black and Hot-Dipped Zinc
Coated (Galvanized) Welded and Seamless Steel Pipe for FIRE PROTECTION USE
✔✔ASTM B43 -✔✔Specification for Seamless Red Brass Pipe, Standard Sizes
✔✔ASTM B75/B75M -✔✔Specification for Seamless Copper Tube
✔✔ASTM B88 -✔✔Specification for Seamless Copper Water Tube
, ✔✔ASTM B251/B251M -✔✔Standard Specification for General Requirements for
Wrought Seamless Copper and Copper-Alloy Tube
✔✔ASTM SI10 -✔✔American National Standard for Metric Practice
✔✔AWWA C104/A21.4 -✔✔Cement-Mortar Lining for Ductile Iron Pipe & Fittings
✔✔AWWA C105/A21.5 -✔✔Polyethylene Encasement for Ductile-Iron Pipe Systems
✔✔AWWA C110/A21.10 -✔✔Ductile-Iron and Gray-Iron Fittings
✔✔AWWA C111/A21.11 -✔✔Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and
Fittings
✔✔AWWA C115/A21.15 -✔✔Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron
Threaded Flanges
✔✔AWWA C150/A21.50 -✔✔Thickness Design of Ductile-Iron Pipe
✔✔AWWA C151/A21.51 -✔✔Ductile-Iron Pipe, Centrifugally Cast
✔✔AWWA C153/A21.53 -✔✔Ductile-Iron Compact Fittings
✔✔AWWA C300 -✔✔Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C301 -✔✔Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
✔✔AWWA C302 -✔✔Reinforced Concrete Pressure Pipe, Noncylinder Type
✔✔AWWA C303 -✔✔Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
✔✔AWWA C600 -✔✔Installation of Ductile-Iron Water Mains and Their Appurtenances
✔✔AWWA C602 -✔✔Cement-Mortar Lining of Water Pipe Lines in Place, 4in and
Larger
✔✔AWWA C900 -✔✔Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings,
4" to 60"
✔✔AWWA C909 -✔✔Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4"
to 24" for Water, Wastewater, and Reclaimed Water Service
