PROTOOLS 101 CORRECT LATEST QUESTIONS
AND ANSWERS SURE A+
✔✔Trim Tool - ✔✔Use to trim excess audio, MIDI, or video content from the beginning
or end of a continuous section of program material, or clip. Modifies clips
nondestructively, leaving the underlying source audio or video files unchanged. Allows
you to quickly crop a clip or adjust a clip's boundaries to hide or expose underlying
material.
✔✔Selector Tool - ✔✔Use to position the playback cursor or to select an area in a track
for playback or editing. Selects horizontally or vertically, allowing selections across
multiple tracks in a single operation.
✔✔Grabber Tool - ✔✔Use to select an entire clip with a single mouse click, to move
clips along the Timeline within their current tracks and to move clips between tracks.
✔✔Scrubber Tool - ✔✔Use to "scrub" slowly across Audio tracks in the Edit window to
find a particular moment or audio event. By scrubbing back and forth over an audio
waveform in Pro Tools, you can listen closely and zero in on an exact edit point.
✔✔Pencil Tool - ✔✔Use to destructively "redraw" waveform data. Most commonly used
to repair a pop or click in an audio file. Also useful for creating and editing MIDI data.
Shapes (Freehand, Line, Triangle, Square, and Random) can be used to enter pitches
with varying durations and velocities. Can be useful for drawing and editing different
types of automation or MIDI control data. Examples: Line for volume, Triangle for pan,
Freehand for pitch bend, and Square or Random for velocity.
✔✔Smart Tool - ✔✔Use to provide instant access to the Selector, Grabber, and Trim
tools and to perform fades and crossfades. To use as a Selector, hover over middle of
an audio clip in the upper half. To use as a Grabber, hover over lower half. To use as a
Trim, hover near clip's start or end point.
, ✔✔Shuffle Mode - ✔✔Clip movement is CONSTRAINED by other clips, and any
changes you make affect the placement of subsequent clips on the track. When you
move a clip in Shuffle mode, it will snap to the previous or next clip on the track. Use as
a convenient way to make clips line up next to each other, without overlapping or
leaving silence between them
✔✔Slip Mode - ✔✔Move, trim, cut, or paste clips freely within a track without affecting
the placement of other clips on the track. Place a clip anywhere on the a track, leaving
space between it and other clips, if desired. Use when you want to select and edit
media without restrictions to placement in time.
✔✔Spot Mode - ✔✔Move or place clips at precise locations by specifying the
destination location in a dialog box. Edit operations do not affect the placement of other
clips on the track. When enabled, Pro Tools prompts you with a dialog box when
working with clips, allowing you to specify the start, end, duration, or other relevant
parameters. Use when you want to control the placement or duration of a clip using
precise numerical values.
✔✔Grid Mode - ✔✔Clips and MIDI notes that are moved, trimmed, or inserted will snap
to the nearest time increment using the currently selected Time Scale and Grid size.
Can be applied using either Absolute or Relative positioning options. Use for making
precise edits and aligning clips and selections using precise time intervals.
✔✔Main Time Scale - ✔✔Determines the timebase units used in Pro Tools' timing
displays, including:
The Main Counter in the Edit Window
The Main Location Indicator in the Transport window
Selection Start, End, and Length values
✔✔Ruler Display Options - ✔✔Two types of rulers that can be displayed in the Edit
window: Timebase Rulers and Conductor Rulers
✔✔Timebase Rulers - ✔✔Bars|Beats
Min:Sec
Samples
Timecode
Timecode 2
Feet+Frames
✔✔Conductor Rulers - ✔✔Markers
Tempo
Meter
Key
Chords
AND ANSWERS SURE A+
✔✔Trim Tool - ✔✔Use to trim excess audio, MIDI, or video content from the beginning
or end of a continuous section of program material, or clip. Modifies clips
nondestructively, leaving the underlying source audio or video files unchanged. Allows
you to quickly crop a clip or adjust a clip's boundaries to hide or expose underlying
material.
✔✔Selector Tool - ✔✔Use to position the playback cursor or to select an area in a track
for playback or editing. Selects horizontally or vertically, allowing selections across
multiple tracks in a single operation.
✔✔Grabber Tool - ✔✔Use to select an entire clip with a single mouse click, to move
clips along the Timeline within their current tracks and to move clips between tracks.
✔✔Scrubber Tool - ✔✔Use to "scrub" slowly across Audio tracks in the Edit window to
find a particular moment or audio event. By scrubbing back and forth over an audio
waveform in Pro Tools, you can listen closely and zero in on an exact edit point.
✔✔Pencil Tool - ✔✔Use to destructively "redraw" waveform data. Most commonly used
to repair a pop or click in an audio file. Also useful for creating and editing MIDI data.
Shapes (Freehand, Line, Triangle, Square, and Random) can be used to enter pitches
with varying durations and velocities. Can be useful for drawing and editing different
types of automation or MIDI control data. Examples: Line for volume, Triangle for pan,
Freehand for pitch bend, and Square or Random for velocity.
✔✔Smart Tool - ✔✔Use to provide instant access to the Selector, Grabber, and Trim
tools and to perform fades and crossfades. To use as a Selector, hover over middle of
an audio clip in the upper half. To use as a Grabber, hover over lower half. To use as a
Trim, hover near clip's start or end point.
, ✔✔Shuffle Mode - ✔✔Clip movement is CONSTRAINED by other clips, and any
changes you make affect the placement of subsequent clips on the track. When you
move a clip in Shuffle mode, it will snap to the previous or next clip on the track. Use as
a convenient way to make clips line up next to each other, without overlapping or
leaving silence between them
✔✔Slip Mode - ✔✔Move, trim, cut, or paste clips freely within a track without affecting
the placement of other clips on the track. Place a clip anywhere on the a track, leaving
space between it and other clips, if desired. Use when you want to select and edit
media without restrictions to placement in time.
✔✔Spot Mode - ✔✔Move or place clips at precise locations by specifying the
destination location in a dialog box. Edit operations do not affect the placement of other
clips on the track. When enabled, Pro Tools prompts you with a dialog box when
working with clips, allowing you to specify the start, end, duration, or other relevant
parameters. Use when you want to control the placement or duration of a clip using
precise numerical values.
✔✔Grid Mode - ✔✔Clips and MIDI notes that are moved, trimmed, or inserted will snap
to the nearest time increment using the currently selected Time Scale and Grid size.
Can be applied using either Absolute or Relative positioning options. Use for making
precise edits and aligning clips and selections using precise time intervals.
✔✔Main Time Scale - ✔✔Determines the timebase units used in Pro Tools' timing
displays, including:
The Main Counter in the Edit Window
The Main Location Indicator in the Transport window
Selection Start, End, and Length values
✔✔Ruler Display Options - ✔✔Two types of rulers that can be displayed in the Edit
window: Timebase Rulers and Conductor Rulers
✔✔Timebase Rulers - ✔✔Bars|Beats
Min:Sec
Samples
Timecode
Timecode 2
Feet+Frames
✔✔Conductor Rulers - ✔✔Markers
Tempo
Meter
Key
Chords
