KENTUCKY BOILER CONTRACTOR EXAM ACTUAL TEST
BANK 2026 /2027 COMPREHENSIVE PRACTICE
QUESTIONS AND STUDY GUIDE COMPLETE ACCURATE
EXAM APPROVED QUESTIONS WITH WELL
ELABORATED ANSWERS AND DETAILED RATIONALES
(100% CORRECT VERIFIED SOLUTIONS) LATEST
UPDATED VERSION 2026 EDITION |GUARANTEED PASS
A+ |FULL REVISED KENTUCKY BOILER CONTRACTOR
EXAM |JUST RELEASED
Date: August 7, 2026
Licensing Authority: Kentucky Department of Housing, Buildings
and Construction – Boiler Inspection Section
Governing Statutes: KRS Chapter 236, 815 KAR Chapter 15
Passing Score: 70%
Exam Format: Multiple-choice (four choices per question)
1. Under KRS Chapter 236, which of the following best defines a
“Power Boiler”?
A) A boiler used solely for heating a single residence
B) A boiler that produces steam at a pressure greater than 15 psi
gauge
C) A low-temperature water heater for domestic use
,D) Any pressure vessel that contains water
Correct Answer: B
Rationale: A “Power Boiler” is defined as a boiler that produces
steam at a pressure greater than 15 psi gauge, distinguishing it from
low-pressure heating boilers. This definition is established under
KRS Chapter 236 and aligns with ASME Section I classifications.
2. According to Kentucky licensing rules, which qualification is
required to obtain a Boiler Contractor license?
A) Minimum of two years of experience installing residential
furnaces
B) Completion of an approved apprenticeship in boiler installation
and repair
C) Possession of a valid commercial driver’s license
D) A bachelor’s degree in mechanical engineering
Correct Answer: B
,Rationale: Kentucky requires applicants to complete an approved
apprenticeship or equivalent experience specifically in boiler
installation and repair to qualify for a Boiler Contractor license. KRS
236.210 establishes the experience requirements for licensure.
3. How often must a power boiler be inspected under Kentucky's
mandatory inspection schedule?
A) Every six months
B) Annually
C) Biennially
D) Every three years
Correct Answer: B
Rationale: Power boilers are required to undergo an annual
inspection to ensure continued compliance with safety standards
under Kentucky regulations and KRS Chapter 236.
4. A boiler contractor in Kentucky must hold a valid certification
issued by which authority?
, A) Kentucky Department of Environmental Protection
B) Kentucky Labor Cabinet, Division of Occupational Safety and
Health Compliance
C) Kentucky Department of Housing, Buildings and Construction
D) Kentucky Board of Boiler and Pressure Vessel Rules
Correct Answer: C
Rationale: Under Kentucky Revised Statutes (KRS) Chapter 236, the
Department of Housing, Buildings and Construction (HBC) has
authority over boiler and pressure vessel safety, including contractor
certification. The Division of Plumbing, Boilers, and Pressure
Vessels operates within HBC.
5. According to Kentucky administrative regulations, a boiler
contractor's certification is valid for a period of:
A) 1 year
B) 2 years
C) 3 years
BANK 2026 /2027 COMPREHENSIVE PRACTICE
QUESTIONS AND STUDY GUIDE COMPLETE ACCURATE
EXAM APPROVED QUESTIONS WITH WELL
ELABORATED ANSWERS AND DETAILED RATIONALES
(100% CORRECT VERIFIED SOLUTIONS) LATEST
UPDATED VERSION 2026 EDITION |GUARANTEED PASS
A+ |FULL REVISED KENTUCKY BOILER CONTRACTOR
EXAM |JUST RELEASED
Date: August 7, 2026
Licensing Authority: Kentucky Department of Housing, Buildings
and Construction – Boiler Inspection Section
Governing Statutes: KRS Chapter 236, 815 KAR Chapter 15
Passing Score: 70%
Exam Format: Multiple-choice (four choices per question)
1. Under KRS Chapter 236, which of the following best defines a
“Power Boiler”?
A) A boiler used solely for heating a single residence
B) A boiler that produces steam at a pressure greater than 15 psi
gauge
C) A low-temperature water heater for domestic use
,D) Any pressure vessel that contains water
Correct Answer: B
Rationale: A “Power Boiler” is defined as a boiler that produces
steam at a pressure greater than 15 psi gauge, distinguishing it from
low-pressure heating boilers. This definition is established under
KRS Chapter 236 and aligns with ASME Section I classifications.
2. According to Kentucky licensing rules, which qualification is
required to obtain a Boiler Contractor license?
A) Minimum of two years of experience installing residential
furnaces
B) Completion of an approved apprenticeship in boiler installation
and repair
C) Possession of a valid commercial driver’s license
D) A bachelor’s degree in mechanical engineering
Correct Answer: B
,Rationale: Kentucky requires applicants to complete an approved
apprenticeship or equivalent experience specifically in boiler
installation and repair to qualify for a Boiler Contractor license. KRS
236.210 establishes the experience requirements for licensure.
3. How often must a power boiler be inspected under Kentucky's
mandatory inspection schedule?
A) Every six months
B) Annually
C) Biennially
D) Every three years
Correct Answer: B
Rationale: Power boilers are required to undergo an annual
inspection to ensure continued compliance with safety standards
under Kentucky regulations and KRS Chapter 236.
4. A boiler contractor in Kentucky must hold a valid certification
issued by which authority?
, A) Kentucky Department of Environmental Protection
B) Kentucky Labor Cabinet, Division of Occupational Safety and
Health Compliance
C) Kentucky Department of Housing, Buildings and Construction
D) Kentucky Board of Boiler and Pressure Vessel Rules
Correct Answer: C
Rationale: Under Kentucky Revised Statutes (KRS) Chapter 236, the
Department of Housing, Buildings and Construction (HBC) has
authority over boiler and pressure vessel safety, including contractor
certification. The Division of Plumbing, Boilers, and Pressure
Vessels operates within HBC.
5. According to Kentucky administrative regulations, a boiler
contractor's certification is valid for a period of:
A) 1 year
B) 2 years
C) 3 years
