Custodial Facility Operations Technician
Practice Examination Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download
Pdf
SUBJECT AREA 1: SAFETY PROCEDURES AND PROTOCOLS (Questions 1-15)
1. What is the first step to take when responding to a chemical spill in a custodial
facility?
A) Begin cleaning the spill immediately
B) Evacuate the area and alert others
C) Identify the chemical using the Safety Data Sheet
D) Apply absorbent material to the spill
Correct Answer: B
*Rationale: The first priority in any chemical spill response is to ensure personnel
safety by evacuating the area and alerting others. Identification of the chemical and
proper cleanup procedures follow after the area is secured and appropriate
personnel are notified. *
2. Which type of fire extinguisher should be used on a fire involving electrical
equipment?
A) Class A
B) Class B
C) Class C
D) Class D
,Correct Answer: C
*Rationale: Class C fire extinguishers are specifically designed for fires involving
energized electrical equipment. Using water-based or other conductive
extinguishing agents on electrical fires can result in electrocution. *
3. What is the proper sequence for donning personal protective equipment (PPE)
for handling hazardous chemicals?
A) Goggles, gloves, apron, respirator
B) Respirator, goggles, gloves, apron
C) Gloves, apron, goggles, respirator
D) Apron, gloves, respirator, goggles
Correct Answer: B
*Rationale: The proper sequence for donning PPE is respirator first, followed by
goggles, gloves, and finally apron. This sequence ensures that respiratory
protection is prioritized and that gloves and apron are donned last to prevent
contamination. *
4. What does the acronym PASS stand for when using a fire extinguisher?
A) Pull, Aim, Squeeze, Sweep
B) Push, Activate, Spray, Stop
C) Prepare, Assess, Secure, Suppress
D) Position, Approach, Spray, Sweep
Correct Answer: A
*Rationale: PASS is the standard mnemonic for proper fire extinguisher use: Pull
the pin, Aim at the base of the fire, Squeeze the handle, and Sweep from side to
side. This technique ensures effective fire suppression. *
5. What is the maximum allowable weight limit for a single person to safely lift
without mechanical assistance according to OSHA guidelines?
,A) 25 pounds
B) 50 pounds
C) 75 pounds
D) 100 pounds
Correct Answer: B
*Rationale: OSHA guidelines generally recommend that single-person lifts should
not exceed 50 pounds without mechanical assistance. However, individual
capabilities and specific workplace assessments may modify this limit. *
6. Which of the following is the most common cause of slips, trips, and falls in
custodial facilities?
A) Uneven flooring
B) Wet floors without warning signs
C) Improper lighting
D) Cluttered walkways
Correct Answer: B
*Rationale: Wet floors without proper warning signage are the most frequent
cause of slips, trips, and falls in custodial environments. While other factors
contribute, the combination of moisture and lack of warning creates the highest
risk. *
7. What is the appropriate first aid response for a chemical splash in the eye?
A) Apply a cold compress to the eye
B) Flush the eye with water for at least 15 minutes
C) Cover the eye with a sterile bandage
D) Administer eye drops to neutralize the chemical
Correct Answer: B
*Rationale: Immediate and continuous flushing of the eye with water for at least
15 minutes is the recommended first aid response for chemical eye exposure. This
dilutes and removes the chemical while preventing further tissue damage. *
, 8. Which document provides detailed information about the hazards, handling, and
storage of a specific chemical product?
A) Material Safety Data Sheet (MSDS)
B) Hazard Communication Standard (HCS)
C) Chemical Inventory List
D) Standard Operating Procedure (SOP)
Correct Answer: A
*Rationale: The Safety Data Sheet (formerly MSDS) provides comprehensive
information about chemical properties, hazards, protective measures, and
emergency procedures. It is the primary source of safety information for chemical
products. *
9. What is the minimum number of exits required for a custodial facility work area?
A) One exit
B) Two exits
C) Three exits
D) Four exits
Correct Answer: B
*Rationale: OSHA and building codes generally require at least two means of
egress from work areas to ensure that if one exit is blocked or unsafe, personnel
have an alternative escape route. *
10. When operating floor maintenance equipment, what is the most important
safety practice?
A) Ensuring the equipment is properly grounded
B) Wearing appropriate foot protection
C) Maintaining awareness of surrounding personnel
D) Checking fluid levels before operation
Practice Examination Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download
SUBJECT AREA 1: SAFETY PROCEDURES AND PROTOCOLS (Questions 1-15)
1. What is the first step to take when responding to a chemical spill in a custodial
facility?
A) Begin cleaning the spill immediately
B) Evacuate the area and alert others
C) Identify the chemical using the Safety Data Sheet
D) Apply absorbent material to the spill
Correct Answer: B
*Rationale: The first priority in any chemical spill response is to ensure personnel
safety by evacuating the area and alerting others. Identification of the chemical and
proper cleanup procedures follow after the area is secured and appropriate
personnel are notified. *
2. Which type of fire extinguisher should be used on a fire involving electrical
equipment?
A) Class A
B) Class B
C) Class C
D) Class D
,Correct Answer: C
*Rationale: Class C fire extinguishers are specifically designed for fires involving
energized electrical equipment. Using water-based or other conductive
extinguishing agents on electrical fires can result in electrocution. *
3. What is the proper sequence for donning personal protective equipment (PPE)
for handling hazardous chemicals?
A) Goggles, gloves, apron, respirator
B) Respirator, goggles, gloves, apron
C) Gloves, apron, goggles, respirator
D) Apron, gloves, respirator, goggles
Correct Answer: B
*Rationale: The proper sequence for donning PPE is respirator first, followed by
goggles, gloves, and finally apron. This sequence ensures that respiratory
protection is prioritized and that gloves and apron are donned last to prevent
contamination. *
4. What does the acronym PASS stand for when using a fire extinguisher?
A) Pull, Aim, Squeeze, Sweep
B) Push, Activate, Spray, Stop
C) Prepare, Assess, Secure, Suppress
D) Position, Approach, Spray, Sweep
Correct Answer: A
*Rationale: PASS is the standard mnemonic for proper fire extinguisher use: Pull
the pin, Aim at the base of the fire, Squeeze the handle, and Sweep from side to
side. This technique ensures effective fire suppression. *
5. What is the maximum allowable weight limit for a single person to safely lift
without mechanical assistance according to OSHA guidelines?
,A) 25 pounds
B) 50 pounds
C) 75 pounds
D) 100 pounds
Correct Answer: B
*Rationale: OSHA guidelines generally recommend that single-person lifts should
not exceed 50 pounds without mechanical assistance. However, individual
capabilities and specific workplace assessments may modify this limit. *
6. Which of the following is the most common cause of slips, trips, and falls in
custodial facilities?
A) Uneven flooring
B) Wet floors without warning signs
C) Improper lighting
D) Cluttered walkways
Correct Answer: B
*Rationale: Wet floors without proper warning signage are the most frequent
cause of slips, trips, and falls in custodial environments. While other factors
contribute, the combination of moisture and lack of warning creates the highest
risk. *
7. What is the appropriate first aid response for a chemical splash in the eye?
A) Apply a cold compress to the eye
B) Flush the eye with water for at least 15 minutes
C) Cover the eye with a sterile bandage
D) Administer eye drops to neutralize the chemical
Correct Answer: B
*Rationale: Immediate and continuous flushing of the eye with water for at least
15 minutes is the recommended first aid response for chemical eye exposure. This
dilutes and removes the chemical while preventing further tissue damage. *
, 8. Which document provides detailed information about the hazards, handling, and
storage of a specific chemical product?
A) Material Safety Data Sheet (MSDS)
B) Hazard Communication Standard (HCS)
C) Chemical Inventory List
D) Standard Operating Procedure (SOP)
Correct Answer: A
*Rationale: The Safety Data Sheet (formerly MSDS) provides comprehensive
information about chemical properties, hazards, protective measures, and
emergency procedures. It is the primary source of safety information for chemical
products. *
9. What is the minimum number of exits required for a custodial facility work area?
A) One exit
B) Two exits
C) Three exits
D) Four exits
Correct Answer: B
*Rationale: OSHA and building codes generally require at least two means of
egress from work areas to ensure that if one exit is blocked or unsafe, personnel
have an alternative escape route. *
10. When operating floor maintenance equipment, what is the most important
safety practice?
A) Ensuring the equipment is properly grounded
B) Wearing appropriate foot protection
C) Maintaining awareness of surrounding personnel
D) Checking fluid levels before operation
