Automotive Service -Quizzes 1-10 With
Quality Answers 2026 Updated.
Per U.S. Department of Labor statistics, approximately how many people in the country are
employed as automotive technicians and mechanics? - Answer 800000
Technician A says a technician who is paid by the flat-rate system is paid according to the
number of hours he or she actually spends on a repair. Technician B says a salaried technician
gets paid overtime when he or she works more than 40 hours. Who is correct? - Answer
Neither is correct
Technician A says "engine performance" is the name of an area in which an automotive
technician can be ASE certified. Technician B says "vehicle accessories" is the name of an area in
which an automotive technician can be ASE certified. Who is correct? - Answer A only
Technician A says ASE is an organization that tests and certifies automotive technicians.
Technician B says NATEF is a part of ASE that reviews automotive technology training programs.
Who is correct? - Answer Both are correct
Technician A says most shops provide each automotive technician a set of common hand tools.
Technician B says most shops provide the more expensive power tools and equipment. Who is
correct? - Answer B only
In a typical vehicle, what is the percentage of systems that are controlled by electronics? -
Answer 86
Work for automotive technicians is described as - Answer Generally Steady
Technician A says experience in repairing your own car qualifies you for most automotive
technology jobs. Technician B says most employers in the automotive technology field are
looking for applicants with formal training. Who is correct? - Answer B only
What is the term for the pay method in which workers are strictly paid for the time they put in?
- Answer Hourly
Which position is indirectly related to the automotive technology field? - Answer Marine
equipment technician
Technician A says gasoline is not intended for use as a parts washer. Technician B says gasoline
fumes can ignite and cause severe burns and death. Who is correct? - Answer Both are Correct
, Oily rags should be stored in - Answer airtight metal safety containers.
Technician A says ATF stands for all-purpose transaxle fluid. Technician B says gear lube is
thinner than motor oil or ATF. Who is correct? - Answer Neither are Correct
Which type of grease is typically used to lubricate vehicle hood and door hinges? - Answer
White lithium grease
Which type of parts is digestive-type carburetor cleaner used to clean? - Answer Metal
Technician A says, unlike petroleum-based parts-washing solvent, aqueous-based parts-washing
solvent is typically nonflammable. Technician B says petroleum-based parts-washing solvent
uses heat, agitation, and detergents to clean automotive parts. Who is correct? - Answer A
only
Which is a light oil? - Answer Liquid graphite
Technician A says grease is valued for its ability to stay on parts for a long time. Technician B says
grease is valued for its ability to withstand high pressure. Who is correct? - Answer Both are
Correct
Technician A says choke and throttle body cleaner is more flammable than petroleum-based
parts-washing solvent. Technician B says choke and throttle body cleaner can damage paint.
Who is correct? - Answer Both are Correct
Which is a solvent formulated to remove grease and oil from rotors? - Answer Brake Cleaner
The most common hammer used for driving punches and chisels is the - Answer Ball Peen
Which pliers have a knob to clamp the handles in place? - Answer Locking
Technician A says there is less chance of damaging a bolt when using a box wrench. Technician B
says an adjustable wrench does not grip as solidly as a box wrench. Who is correct? - Answer
Both are Correct
Technician A says locking pliers are required for spreading or compressing springy snap rings.
Technician B says diagonal-cutting pliers will be damaged if used to cut spring steel. Who is
correct? - Answer B only
Quality Answers 2026 Updated.
Per U.S. Department of Labor statistics, approximately how many people in the country are
employed as automotive technicians and mechanics? - Answer 800000
Technician A says a technician who is paid by the flat-rate system is paid according to the
number of hours he or she actually spends on a repair. Technician B says a salaried technician
gets paid overtime when he or she works more than 40 hours. Who is correct? - Answer
Neither is correct
Technician A says "engine performance" is the name of an area in which an automotive
technician can be ASE certified. Technician B says "vehicle accessories" is the name of an area in
which an automotive technician can be ASE certified. Who is correct? - Answer A only
Technician A says ASE is an organization that tests and certifies automotive technicians.
Technician B says NATEF is a part of ASE that reviews automotive technology training programs.
Who is correct? - Answer Both are correct
Technician A says most shops provide each automotive technician a set of common hand tools.
Technician B says most shops provide the more expensive power tools and equipment. Who is
correct? - Answer B only
In a typical vehicle, what is the percentage of systems that are controlled by electronics? -
Answer 86
Work for automotive technicians is described as - Answer Generally Steady
Technician A says experience in repairing your own car qualifies you for most automotive
technology jobs. Technician B says most employers in the automotive technology field are
looking for applicants with formal training. Who is correct? - Answer B only
What is the term for the pay method in which workers are strictly paid for the time they put in?
- Answer Hourly
Which position is indirectly related to the automotive technology field? - Answer Marine
equipment technician
Technician A says gasoline is not intended for use as a parts washer. Technician B says gasoline
fumes can ignite and cause severe burns and death. Who is correct? - Answer Both are Correct
, Oily rags should be stored in - Answer airtight metal safety containers.
Technician A says ATF stands for all-purpose transaxle fluid. Technician B says gear lube is
thinner than motor oil or ATF. Who is correct? - Answer Neither are Correct
Which type of grease is typically used to lubricate vehicle hood and door hinges? - Answer
White lithium grease
Which type of parts is digestive-type carburetor cleaner used to clean? - Answer Metal
Technician A says, unlike petroleum-based parts-washing solvent, aqueous-based parts-washing
solvent is typically nonflammable. Technician B says petroleum-based parts-washing solvent
uses heat, agitation, and detergents to clean automotive parts. Who is correct? - Answer A
only
Which is a light oil? - Answer Liquid graphite
Technician A says grease is valued for its ability to stay on parts for a long time. Technician B says
grease is valued for its ability to withstand high pressure. Who is correct? - Answer Both are
Correct
Technician A says choke and throttle body cleaner is more flammable than petroleum-based
parts-washing solvent. Technician B says choke and throttle body cleaner can damage paint.
Who is correct? - Answer Both are Correct
Which is a solvent formulated to remove grease and oil from rotors? - Answer Brake Cleaner
The most common hammer used for driving punches and chisels is the - Answer Ball Peen
Which pliers have a knob to clamp the handles in place? - Answer Locking
Technician A says there is less chance of damaging a bolt when using a box wrench. Technician B
says an adjustable wrench does not grip as solidly as a box wrench. Who is correct? - Answer
Both are Correct
Technician A says locking pliers are required for spreading or compressing springy snap rings.
Technician B says diagonal-cutting pliers will be damaged if used to cut spring steel. Who is
correct? - Answer B only
