CWB Level 1 Welding Processes and Equipment Exam Questions And Answers with Explanations ||Practice Questions with Solutions Newest | Already Graded A+||Latest Exams!!!

1|Page


CWB Level 1 Welding Processes and Equipment Exam

Questions And Answers with Explanations ||Practice

Questions with Solutions Newest 2026 2027 | Already

Graded A+||Latest Exams!!!

How many times may low-hydrogen SMAW electrodes be

rebaked? (Multiple choice)

Question 6 options:A) One time.B) Two times.C) Three

times.D) Four times. - ANSWER-A) One time.




The components of the SMAW system are: (Multiple

choice)

Question 7 options:A) CV power supply, welding gun,

ground cable, and external shielding gas.B) CV power

supply, welding gun, and ground cable.C) CC power

supply, electrode holder, and ground cable.D) CC power

,2|Page


supply, electrode holder, ground cable, and external

shielding gas. - ANSWER-C) CC power supply, electrode

holder, and ground cable.




What do the first two digits of a shielded metal arc welding

electrode classification indicate? (Multiple choice)

Question 8 options:A) The weld deposit strength.B) The

deposition rate of the electrode.C) The yield strength of

the electrode.D) The type of electrode coating. -

ANSWER-A) The weld deposit strength.




Each electrode for SMAW must be imprinted with its

classification. (True/False) - ANSWER-True

,3|Page


The submerged arc welding process: (Multiple choice)

Question 10 options:A) can only be used with a constant

voltage power supply.B) can only be used with a constant

current power supply.C) can only be used with a constant

current power supply with high frequency.D) can be used

with either a constant voltage or a constant current power

supply. - ANSWER-D) can be used with either a constant

voltage or a constant current power supply.




The SAW fluxes that significantly influence the

composition of the weld metal through slag/metal

reactions are called: (Multiple choice)

Question 11 options:A) Fused.B) Bonded.C) Active.D)

Neutral. - ANSWER-C) Active.

, 4|Page


MCAW uses a ________ push (forehand) technique for

optimal bead shape and appearance. (Multiple choice)

Question 1 options:

A) 10° to 20°

B) 20° to 30°

C) 5° to 15°

D) 15° to 30° - ANSWER-A) 10° to 20°




In MCAW, the burning of the wire is______________due

to the deoxidizers and arc stabilizers added to the flux.

(Multiple choice)

Question 2 options:A) faster and higher in deposition

rates.B) unstable and undesirable.C) hotter and