CWB 2 Visual Weld Inspector Exam With Complete
Questions And Correct Answers All Graded A+ 2026/2027
Terms in this set (1000)
A consumable electrode is: AN electrode which melts and provides metal
to fill the joint
The weld heat affected zone the portion of the base metal adjacent to the
is: weld metal whose properties have been
changed due to the heat of welding
When an arc is formed electricity flows from negative cathode to
between two electrodes positive anode
, The magnetic pinch force helps in increases as the square of the current causing
the process of the smaller and smaller droplets to be detached
detaching the molten metal drops
from the electrode tip. The
magnetic force
The electric current for welding High voltage, low amperage to low voltage,
must be transformed from high amperage
The major advantage of full penetration welds on thick material in one
electron beam welding process pass
is
The progress of welding with Vertical up
Electroslag welding process is
Explosion welding is solid state process in which coalescence is
produced through high speed impacting of
two or more materials by controlled
detonation
A typical application for thermite joining of rails
welding is
Welding without filler metal with autogenous welding
GTAW process is referred to as
A typical weld flaw associated porosity
with GTAW process is
SMAW power sources typically drooping
have a volt-ampere curve that is
Questions And Correct Answers All Graded A+ 2026/2027
Terms in this set (1000)
A consumable electrode is: AN electrode which melts and provides metal
to fill the joint
The weld heat affected zone the portion of the base metal adjacent to the
is: weld metal whose properties have been
changed due to the heat of welding
When an arc is formed electricity flows from negative cathode to
between two electrodes positive anode
, The magnetic pinch force helps in increases as the square of the current causing
the process of the smaller and smaller droplets to be detached
detaching the molten metal drops
from the electrode tip. The
magnetic force
The electric current for welding High voltage, low amperage to low voltage,
must be transformed from high amperage
The major advantage of full penetration welds on thick material in one
electron beam welding process pass
is
The progress of welding with Vertical up
Electroslag welding process is
Explosion welding is solid state process in which coalescence is
produced through high speed impacting of
two or more materials by controlled
detonation
A typical application for thermite joining of rails
welding is
Welding without filler metal with autogenous welding
GTAW process is referred to as
A typical weld flaw associated porosity
with GTAW process is
SMAW power sources typically drooping
have a volt-ampere curve that is
