|ACTUAL QUESTIONS AND VERIFIED ANSWERS
|LATEST 2026/2027 UPDATE|GRADED A+
Question 1
When utilizing the skip-breathing technique, how long should each breath take?
A. 10 seconds
B. 8 seconds
C. 5 seconds
D. 12 seconds
CORRECT ANSWER
C. 5 seconds
Question 2
While inside the immediately dangerous to life and health (IDLH) atmosphere, the
technique of buddy breathing is:
A. considered unreliable by the Nation Fire Protection Association (NFPA) and the National
Institute on Occupation Safety and Health (NIOSH)
B. acceptable and should be implemented immediately
C. required to be initiated by the Rapid Intervention Crew
D. unsafe unless performed by trained personnel.
CORRECT ANSWER
A. considered unreliable by the National Fire Protection Agency (NFPA) and the National
Institute on Occupational Safety and Health (NIOSH).
Question 3
1
@THE STUDY VAULT
,What is a component of an open-circuit breathing apparatus?
A. buddy breathing connectors
B. face piece
C. high-pressure alarm
D. oxygen Cylinder
CORRECT ANSWER
B. face piece
Question 4
What is one example of a hand-powered hydraulic spreader tool?
A. spanner tool
B. pompier tool
C. rabbet tool
D. come along tool
CORRECT ANSWER
C. rabbet tool
Question 5
The body of a ____ is surface-mounted on the inside of the door.
A. mortise lock
B. rim lock
C. cylindrical lock
D. padlock
CORRECT ANSWER
B. rim lock
2
@THE STUDY VAULT
,Question 6
Under ideal conditions, the proper place to stand when breaking window glass is ______
the window.
A. directly in front of
B. to the windward side of
C. to the leeward side of
D. to either side, slightly lower than
CORRECT ANSWER
B. to the windward side of
Question 7
Which statement regarding the K tool is correct?
A. the front of the tool is shaped like the letter K and slides over the lock cylinder
B. the K tool is designed to cut lock cylinders in order to open the lock.
C. the back of the tool is shaped like the letter K and slides over the lock cylinder.
D. the front of the tool has a block for striking with a flat-head axe.
CORRECT ANSWER
C. The back of the tool is shaped like the letter K and slides over the lock cylinder.
Question 8
Which portion of a Halligan tool has three areas designed as striking surfaces?
A. hook point
B. Adz
3
@THE STUDY VAULT
, C. Fork
D. Pick
CORRECT ANSWER
B. Adz
Question 9
Which is the most common lock in use?
A. cylindrical
B. pad locks
C. Rim locks
D. deadbolt
CORRECT ANSWER
A. cylindrical
Question 10
Fire doors are operated:
A. manually, mechanically, electrically
B. electrically, hydraulically, battery supplied
C. by portable or fixed power units
D. by manual or electrical power
CORRECT ANSWER
A. manually, mechanically, electrically
Question 11
4
@THE STUDY VAULT
|LATEST 2026/2027 UPDATE|GRADED A+
Question 1
When utilizing the skip-breathing technique, how long should each breath take?
A. 10 seconds
B. 8 seconds
C. 5 seconds
D. 12 seconds
CORRECT ANSWER
C. 5 seconds
Question 2
While inside the immediately dangerous to life and health (IDLH) atmosphere, the
technique of buddy breathing is:
A. considered unreliable by the Nation Fire Protection Association (NFPA) and the National
Institute on Occupation Safety and Health (NIOSH)
B. acceptable and should be implemented immediately
C. required to be initiated by the Rapid Intervention Crew
D. unsafe unless performed by trained personnel.
CORRECT ANSWER
A. considered unreliable by the National Fire Protection Agency (NFPA) and the National
Institute on Occupational Safety and Health (NIOSH).
Question 3
1
@THE STUDY VAULT
,What is a component of an open-circuit breathing apparatus?
A. buddy breathing connectors
B. face piece
C. high-pressure alarm
D. oxygen Cylinder
CORRECT ANSWER
B. face piece
Question 4
What is one example of a hand-powered hydraulic spreader tool?
A. spanner tool
B. pompier tool
C. rabbet tool
D. come along tool
CORRECT ANSWER
C. rabbet tool
Question 5
The body of a ____ is surface-mounted on the inside of the door.
A. mortise lock
B. rim lock
C. cylindrical lock
D. padlock
CORRECT ANSWER
B. rim lock
2
@THE STUDY VAULT
,Question 6
Under ideal conditions, the proper place to stand when breaking window glass is ______
the window.
A. directly in front of
B. to the windward side of
C. to the leeward side of
D. to either side, slightly lower than
CORRECT ANSWER
B. to the windward side of
Question 7
Which statement regarding the K tool is correct?
A. the front of the tool is shaped like the letter K and slides over the lock cylinder
B. the K tool is designed to cut lock cylinders in order to open the lock.
C. the back of the tool is shaped like the letter K and slides over the lock cylinder.
D. the front of the tool has a block for striking with a flat-head axe.
CORRECT ANSWER
C. The back of the tool is shaped like the letter K and slides over the lock cylinder.
Question 8
Which portion of a Halligan tool has three areas designed as striking surfaces?
A. hook point
B. Adz
3
@THE STUDY VAULT
, C. Fork
D. Pick
CORRECT ANSWER
B. Adz
Question 9
Which is the most common lock in use?
A. cylindrical
B. pad locks
C. Rim locks
D. deadbolt
CORRECT ANSWER
A. cylindrical
Question 10
Fire doors are operated:
A. manually, mechanically, electrically
B. electrically, hydraulically, battery supplied
C. by portable or fixed power units
D. by manual or electrical power
CORRECT ANSWER
A. manually, mechanically, electrically
Question 11
4
@THE STUDY VAULT
