Certified Playground Safety Inspector CPSI Sample Exam
Questions and verified answers ACTUAL EXAM 2026
TEST!! Graded A+ | 2026/2027 EXAM UPDATE
Terms in this set (74)
To be compliant with ASTM provide buyers with a parts list for the
1487, a designer or playground
manufacturer of playground
equipment should
2. The fish or wedge probe is a partially bounded opening
used to determine whether or
not a hazard exists on
3. Which of the following is Critical height must equal or exceed fall height
correct regarding the impact-
attenuation of surfacing
material
4. When evaluating the hire a licensed professional engineer to certify
structural integrity of a support the integrity of the equipment
structure for a swing that
appears to be failing, a CPSI
, should
5. Manufacturers of playground
equipment must: provide the
manufacturer's identification
of the equipment
6. The majority of injuries falls to the surface on which the equipment was
associated with playground located
equipment result from
7. An opening may present a grabs the 5/8" (16mm) dowel
common crush or shear hazard
only if it
8. The criteria for unitary surface ASTM F1292 and F1487
materials includes meeting
requirements of
9. Regarding playground safety Signage may not prevent accidents but may
signage, which of the following reduce liability
is correct
10. Which of the following Type of surfacing and amount of use
factors is MOST important when
determining the frequency of
inspections of surfacing
Questions and verified answers ACTUAL EXAM 2026
TEST!! Graded A+ | 2026/2027 EXAM UPDATE
Terms in this set (74)
To be compliant with ASTM provide buyers with a parts list for the
1487, a designer or playground
manufacturer of playground
equipment should
2. The fish or wedge probe is a partially bounded opening
used to determine whether or
not a hazard exists on
3. Which of the following is Critical height must equal or exceed fall height
correct regarding the impact-
attenuation of surfacing
material
4. When evaluating the hire a licensed professional engineer to certify
structural integrity of a support the integrity of the equipment
structure for a swing that
appears to be failing, a CPSI
, should
5. Manufacturers of playground
equipment must: provide the
manufacturer's identification
of the equipment
6. The majority of injuries falls to the surface on which the equipment was
associated with playground located
equipment result from
7. An opening may present a grabs the 5/8" (16mm) dowel
common crush or shear hazard
only if it
8. The criteria for unitary surface ASTM F1292 and F1487
materials includes meeting
requirements of
9. Regarding playground safety Signage may not prevent accidents but may
signage, which of the following reduce liability
is correct
10. Which of the following Type of surfacing and amount of use
factors is MOST important when
determining the frequency of
inspections of surfacing
