BICSI TECHNICIAN Exam 2026/2027 TEST
QUESTIONS WITH ANSWERS RATED A+
• When expanding an existing TR where the wall needs to be removed and has active
equipment and terminations attached the installer will need to -✓✓ Float the wall or rack
• What common cabinet configuration providing increased efficiency in heat
management is where -✓✓ The hot side of two cabinet rows face each other
• What are pulling sheafed used for? -✓✓ To assist in the routing of the cable to the
point where it will be pulled to the upper floors
• What are the 2 types of EMT couplings used to connect sections together? -✓✓
Compression and set screws
• Using company property for business only, being punctual and maintaining
confidentiality are examples of____________ -✓✓ Professionalism
• Radiating cable standoffs supports should be installed a MINIMUM of ____________
below the cable tray -✓✓ 77mm (3in)
• If you are connecting a pul rope to optical fiber without a wire mesh or pulling eye what
should you connect to -✓✓ The aramid yarn
• To avoid electromagnetic interference in cabling what is the recommended minimum
separation from fluorescent lamps -✓✓ 150 mm ( 6in)
• What are the two common tests for wireless systems -✓✓ Throughput and signal
strength
• A TDR (time domain refractometer) the his ability to do what function -✓✓
Troubleshoot unshielded cables and screen shielded balanced twisted pack cables
• It is suggested that open top cable supports the use no more than how many cables -
✓✓ 50
• All ITS installers should take courses in and be capable of providing what? -✓✓ Basic
first aid and CPR
QUESTIONS WITH ANSWERS RATED A+
• When expanding an existing TR where the wall needs to be removed and has active
equipment and terminations attached the installer will need to -✓✓ Float the wall or rack
• What common cabinet configuration providing increased efficiency in heat
management is where -✓✓ The hot side of two cabinet rows face each other
• What are pulling sheafed used for? -✓✓ To assist in the routing of the cable to the
point where it will be pulled to the upper floors
• What are the 2 types of EMT couplings used to connect sections together? -✓✓
Compression and set screws
• Using company property for business only, being punctual and maintaining
confidentiality are examples of____________ -✓✓ Professionalism
• Radiating cable standoffs supports should be installed a MINIMUM of ____________
below the cable tray -✓✓ 77mm (3in)
• If you are connecting a pul rope to optical fiber without a wire mesh or pulling eye what
should you connect to -✓✓ The aramid yarn
• To avoid electromagnetic interference in cabling what is the recommended minimum
separation from fluorescent lamps -✓✓ 150 mm ( 6in)
• What are the two common tests for wireless systems -✓✓ Throughput and signal
strength
• A TDR (time domain refractometer) the his ability to do what function -✓✓
Troubleshoot unshielded cables and screen shielded balanced twisted pack cables
• It is suggested that open top cable supports the use no more than how many cables -
✓✓ 50
• All ITS installers should take courses in and be capable of providing what? -✓✓ Basic
first aid and CPR
