BICSI Test-RETAKE Questions and Correct
Answers| Latest Update
The 2 main considerations concerning the existing cabling are?
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another
until completed is called a
rolling cut 11-28
Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space?
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light?
Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed
out?
CLR 11-27
,A ______ uses several pluggable modules to locate and Identify cables.
Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t
the other end.
Light source and power meter
A ________ detects the presence of light within a fiber strand
Fiber strand identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end.
Visual fault locator
A________ will leave the customer momentarily without communications
Hot-cut 11-28
During a _______, cross-connects are relocated one pair after another until
completed.
Rolling cut
, *_________ is a property of an electromagnetic field built around a conductor
that opposes any changes in current flow in a circuit.
Inductance
____________ is a property of conductors that allows storage of electrical
charges when potential differences (voltages) exist between the conductors.
Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms.
Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz
100
Pair 626 would be in the __________ Super Binder
Red
Series ______ is the preferred choice for longer runs
11
The _________ connector/s have center pins (choose all that apply)
N
Answers| Latest Update
The 2 main considerations concerning the existing cabling are?
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another
until completed is called a
rolling cut 11-28
Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space?
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light?
Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed
out?
CLR 11-27
,A ______ uses several pluggable modules to locate and Identify cables.
Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t
the other end.
Light source and power meter
A ________ detects the presence of light within a fiber strand
Fiber strand identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end.
Visual fault locator
A________ will leave the customer momentarily without communications
Hot-cut 11-28
During a _______, cross-connects are relocated one pair after another until
completed.
Rolling cut
, *_________ is a property of an electromagnetic field built around a conductor
that opposes any changes in current flow in a circuit.
Inductance
____________ is a property of conductors that allows storage of electrical
charges when potential differences (voltages) exist between the conductors.
Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms.
Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz
100
Pair 626 would be in the __________ Super Binder
Red
Series ______ is the preferred choice for longer runs
11
The _________ connector/s have center pins (choose all that apply)
N
