Woodshop Test 1 Questions with Correct
Answers
A typical item in the plan of procedure includes the name of the part and the ______ to
be performed
There are four basic forms of lap joints listed below. Which should be selected for
splicing stock to make longer lengths? Half-lap - End-lap - Cross-lap - Middle-lap
half-lap
When laying out wood joints, which one of the following procedures is NOT
recommended?
-Identify the members of each joint with a number or letter.
-Identical joints should be laid out and cut one at a time
-Pieces to be joined should first be squared to size.
-Layouts can be made by clamping mating parts together.
Identical joints should be laid out and cut one at a time
When boring a hole with an auger bit, the brace is turned?
Clockwise - Counterclockwise
clockwise
In hand woodworking, large holes are bored with an auger bit, forstner bit, or
expansive bit. A hand drill is commonly used for holes under _________ in diameter.
½-⅜-¼-⅛
1/4
Oilstones used for honing a plane iron are made of either natural or artificial material.
A natural stone that is white or light gray in color is called a/an ______________
Answers
A typical item in the plan of procedure includes the name of the part and the ______ to
be performed
There are four basic forms of lap joints listed below. Which should be selected for
splicing stock to make longer lengths? Half-lap - End-lap - Cross-lap - Middle-lap
half-lap
When laying out wood joints, which one of the following procedures is NOT
recommended?
-Identify the members of each joint with a number or letter.
-Identical joints should be laid out and cut one at a time
-Pieces to be joined should first be squared to size.
-Layouts can be made by clamping mating parts together.
Identical joints should be laid out and cut one at a time
When boring a hole with an auger bit, the brace is turned?
Clockwise - Counterclockwise
clockwise
In hand woodworking, large holes are bored with an auger bit, forstner bit, or
expansive bit. A hand drill is commonly used for holes under _________ in diameter.
½-⅜-¼-⅛
1/4
Oilstones used for honing a plane iron are made of either natural or artificial material.
A natural stone that is white or light gray in color is called a/an ______________
