NYC ELECTRICIAN (NYC HEALTH + HOSPITALS – NYC H+H) | LATEST
EXAM QUESTIONS AND SOLUTIONS - VERIFIED ANSWERS - STUDENT
SUCCESS GUIDE
NYC Electrician (NYC Health + Hospitals – NYC H+H)
1. Q: What is the primary electrical code used in NYC?
ANSWER The 2011 National Electrical Code (NEC) as amended by the
2022 NYC Electrical Code (based on Local Law 39 of 2021).
2. Q: In NYC health care facilities, what wiring method is generally
prohibited for branch circuits?
ANSWER Non-metallic sheathed cable (NM/BX or Romex) is prohibited;
Rigid Metal Conduit (RMC) or Intermediate Metal Conduit (IMC) is
typically required.
3. Q: What does NYC Electrical Code require regarding all receptacles in
patient care areas?
ANSWER They must be hospital-grade and clearly marked with a green
dot.
4. Q: Are AC/BX cables permitted in NYC hospitals for new work?
ANSWER Generally no. NYC amendments restrict the use of AC/BX in
many commercial and institutional applications, requiring RMC or IMC
instead.
5. Q: What is the rule for box fills in NYC?
, ANSWER Boxes must be sized according to NEC Article 314.16, but NYC
strictly enforces no "pressing" of wires; proper box sizing must be
calculated and maintained.
6. Q: Where must the disconnecting means for a healthcare facility's
essential electrical system be located?
ANSWER It must be readily accessible to authorized personnel, typically
in the main electrical room, and clearly marked.
7. Q: Does NYC allow the use of EMT (Electrical Metallic Tubing) in patient
care areas?
ANSWER Yes, EMT is permitted in many areas, but RMC or IMC is often
preferred or required for physical protection in high-traffic or vulnerable
hospital areas.
8. Q: What is the NYC rule regarding spare capacity in branch circuit
panels?
ANSWER Healthcare facilities should maintain a minimum of 20% spare
breaker capacity for future expansion.
9. Q: How must grounding conductors be sized in NYC?
ANSWER According to NEC Table 250.122, but NYC inspectors strictly
check for proper bonding of all non-current-carrying metal parts.
10. Q: What color code does NYC mandate for specific grounded
conductors?
ANSWER White or gray for neutral, green or bare for equipment
grounding. (Orange is often used for isolated ground circuits in hospitals).
11. Q: Are GFCI receptacles required in hospital janitor's closets?
ANSWER Yes, within 6 feet of a water source.
,12. Q: What is required for all electrical work exceeding $1,000 in NYC?
ANSWER An Electrical Work Permit filed with the NYC Department of
Buildings (DOB).
13. Q: Who can pull an electrical permit in NYC?
ANSWER A licensed Master Electrician or the electrician performing the
work if they are the property owner of a 1-2 family home (not applicable
to H+H).
14. Q: What is a PW-1 form?
ANSWER A Plan Work Application form required by NYC DOB before any
electrical permit is issued for new construction or major alterations.
15. Q: What is the NYC rule regarding working clearances in front of
electrical panels?
ANSWER Minimum 36 inches deep and 30 inches wide (per NEC 110.26),
strictly enforced by DOB.
16. Q: Can electrical conduits be used as support for other trades' pipes in
NYC?
ANSWER Absolutely not. Conduit must only support its own weight and
approved fittings.
17. Q: What is required for underground electrical duct banks in NYC?
ANSWER They must be encased in a minimum of 3 inches of concrete,
unless otherwise specified by NYC DOT or DEP.
18. Q: How must emergency lighting circuits be routed in NYC?
ANSWER Separated from general wiring, typically in dedicated conduit.
, 19. Q: What is the NYC requirement for marking electrical panels?
ANSWER Panels must have a durable, legible directory card identifying
the load served by each breaker.
20. Q: Are multi-wire branch circuits allowed in NYC patient care areas?
ANSWER They are highly discouraged and heavily restricted in
healthcare due to shared neutral risks.
21. Q: What type of circuit breaker is required for healthcare HVAC
equipment?
ANSWER HVAC-rated (HACR) breakers or appropriate magnetic-only
breakers as per the equipment nameplate.
22. Q: Does NYC allow non-metallic boxes in commercial/healthcare
settings?
ANSWER No, metal boxes are required.
23. Q: What is the minimum burial depth for direct burial cable in NYC?
ANSWER 24 inches (subject to NYC amendments and DEP rules).
24. Q: How must splices be made in NYC commercial electrical systems?
ANSWER Using approved devices (wire nuts, crimps, or exothermic
welding) and placed inside an approved enclosed box.
25. Q: What is the rule for abandoned wiring in NYC?
ANSWER All abandoned conductors must be completely removed from
the conduit or raceway.
26. Q: Are "Taps" allowed without a fuse or circuit breaker in NYC?
EXAM QUESTIONS AND SOLUTIONS - VERIFIED ANSWERS - STUDENT
SUCCESS GUIDE
NYC Electrician (NYC Health + Hospitals – NYC H+H)
1. Q: What is the primary electrical code used in NYC?
ANSWER The 2011 National Electrical Code (NEC) as amended by the
2022 NYC Electrical Code (based on Local Law 39 of 2021).
2. Q: In NYC health care facilities, what wiring method is generally
prohibited for branch circuits?
ANSWER Non-metallic sheathed cable (NM/BX or Romex) is prohibited;
Rigid Metal Conduit (RMC) or Intermediate Metal Conduit (IMC) is
typically required.
3. Q: What does NYC Electrical Code require regarding all receptacles in
patient care areas?
ANSWER They must be hospital-grade and clearly marked with a green
dot.
4. Q: Are AC/BX cables permitted in NYC hospitals for new work?
ANSWER Generally no. NYC amendments restrict the use of AC/BX in
many commercial and institutional applications, requiring RMC or IMC
instead.
5. Q: What is the rule for box fills in NYC?
, ANSWER Boxes must be sized according to NEC Article 314.16, but NYC
strictly enforces no "pressing" of wires; proper box sizing must be
calculated and maintained.
6. Q: Where must the disconnecting means for a healthcare facility's
essential electrical system be located?
ANSWER It must be readily accessible to authorized personnel, typically
in the main electrical room, and clearly marked.
7. Q: Does NYC allow the use of EMT (Electrical Metallic Tubing) in patient
care areas?
ANSWER Yes, EMT is permitted in many areas, but RMC or IMC is often
preferred or required for physical protection in high-traffic or vulnerable
hospital areas.
8. Q: What is the NYC rule regarding spare capacity in branch circuit
panels?
ANSWER Healthcare facilities should maintain a minimum of 20% spare
breaker capacity for future expansion.
9. Q: How must grounding conductors be sized in NYC?
ANSWER According to NEC Table 250.122, but NYC inspectors strictly
check for proper bonding of all non-current-carrying metal parts.
10. Q: What color code does NYC mandate for specific grounded
conductors?
ANSWER White or gray for neutral, green or bare for equipment
grounding. (Orange is often used for isolated ground circuits in hospitals).
11. Q: Are GFCI receptacles required in hospital janitor's closets?
ANSWER Yes, within 6 feet of a water source.
,12. Q: What is required for all electrical work exceeding $1,000 in NYC?
ANSWER An Electrical Work Permit filed with the NYC Department of
Buildings (DOB).
13. Q: Who can pull an electrical permit in NYC?
ANSWER A licensed Master Electrician or the electrician performing the
work if they are the property owner of a 1-2 family home (not applicable
to H+H).
14. Q: What is a PW-1 form?
ANSWER A Plan Work Application form required by NYC DOB before any
electrical permit is issued for new construction or major alterations.
15. Q: What is the NYC rule regarding working clearances in front of
electrical panels?
ANSWER Minimum 36 inches deep and 30 inches wide (per NEC 110.26),
strictly enforced by DOB.
16. Q: Can electrical conduits be used as support for other trades' pipes in
NYC?
ANSWER Absolutely not. Conduit must only support its own weight and
approved fittings.
17. Q: What is required for underground electrical duct banks in NYC?
ANSWER They must be encased in a minimum of 3 inches of concrete,
unless otherwise specified by NYC DOT or DEP.
18. Q: How must emergency lighting circuits be routed in NYC?
ANSWER Separated from general wiring, typically in dedicated conduit.
, 19. Q: What is the NYC requirement for marking electrical panels?
ANSWER Panels must have a durable, legible directory card identifying
the load served by each breaker.
20. Q: Are multi-wire branch circuits allowed in NYC patient care areas?
ANSWER They are highly discouraged and heavily restricted in
healthcare due to shared neutral risks.
21. Q: What type of circuit breaker is required for healthcare HVAC
equipment?
ANSWER HVAC-rated (HACR) breakers or appropriate magnetic-only
breakers as per the equipment nameplate.
22. Q: Does NYC allow non-metallic boxes in commercial/healthcare
settings?
ANSWER No, metal boxes are required.
23. Q: What is the minimum burial depth for direct burial cable in NYC?
ANSWER 24 inches (subject to NYC amendments and DEP rules).
24. Q: How must splices be made in NYC commercial electrical systems?
ANSWER Using approved devices (wire nuts, crimps, or exothermic
welding) and placed inside an approved enclosed box.
25. Q: What is the rule for abandoned wiring in NYC?
ANSWER All abandoned conductors must be completely removed from
the conduit or raceway.
26. Q: Are "Taps" allowed without a fuse or circuit breaker in NYC?
